User:Jcreer/SMS:GSSHA Model Control: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 22: Line 22:
* ''Infiltration type'' –
* ''Infiltration type'' –
**"No infiltration" – Select to not calculate any infiltration.
**"No infiltration" – Select to not calculate any infiltration.
**"Green & Ampt w/ soil moisture redistribution (INF_REDIST)" –
**"Green & Ampt w/ soil moisture redistribution (INF_REDIST)" – Specifies infiltration calculations using ''Green and Ampt with Redistribution'' method - redistributes soil moisture during periods of no- or low- intensity rainfall
***''Soil moisture depth (SOIL_MOIST_DEPTH)'' –
***''Soil moisture depth (SOIL_MOIST_DEPTH)'' –
***''Top layer depth (TOP_LAYER_DEPTH)'' –
***''Top layer depth (TOP_LAYER_DEPTH)'' –
**"Green & Ampt multilayer (INF_LAYERED_SOIL)" –
**"Green & Ampt multilayer (INF_LAYERED_SOIL)" – Specifies three layered Green and Ampt infiltration
***''Soil moisture depth (SOIL_MOIST_DEPTH)'' –
***''Soil moisture depth (SOIL_MOIST_DEPTH)'' –
**"Richards' infiltration (INF_RICHARDS)" – Select when using Richards' equation to simulate infiltration.
**"Richards' infiltration (INF_RICHARDS)" – Select when using Richards' equation to simulate infiltration.
***''Weight (RICHARDS_WEIGHT)'' – Used to determine how much weight is placed on upper and lower cells using the arithmetic weighting method for calculating inter-cell hydraulic conductivities.
***''Weight (RICHARDS_WEIGHT)'' – Used to determine how much weight is placed on upper and lower cells using the arithmetic weighting method for calculating inter-cell hydraulic conductivities.
***''DTHETA MAx (RICHARDS_DTHETA_MAX)'' –
***''DTHETA MAx (RICHARDS_DTHETA_MAX)'' – Specifies maximum water content change allowable. Default value = 0.025.
***''C option (RICHARDS_C_OPTION)'' –
***''C option (RICHARDS_C_OPTION)'' – Hydraulic conductivity and water capacity values dependent on water content of each cell
***''K option (RICHARDS_K_OPTION)'' – Inter-cell hydraulic conductivity weighting method - ''ARITHMETIC'' or ''GEOMETRIC''
***''K option (RICHARDS_K_OPTION)'' – Inter-cell hydraulic conductivity weighting method - ''ARITHMETIC'' or ''GEOMETRIC''
***''Upper option (RICHARDS_UPPER_OPTION)'' –  
***''Upper option (RICHARDS_UPPER_OPTION)'' – Selections here compute the hydraulic conductivity at the ground surface
***''Max Iteration (RICHARDS_ITER_MAX)'' –
***''Max Iteration (RICHARDS_ITER_MAX)'' – Maximum number of iterations specified by the user. Default = 1.
***''Max num. cells (MAX_NUMBER_CELLS)''  –
***''Max num. cells (MAX_NUMBER_CELLS)''  –
***''Soil moisture depth (SOIL_MOIST_DEPTH)'' – A decimal depth value in meters.
***''Soil moisture depth (SOIL_MOIST_DEPTH)'' – A decimal depth value in meters.

Revision as of 17:46, 10 May 2024


General

  • Total time (TOT_TIME) – An integer giving the total duration of the simulation in minutes
  • Time step (TIMESTEP) – An integer giving the duration of each time step in the simulation in seconds. The time step must be evenly divisible into 60 seconds (e.g., 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, or 60 seconds).
  • Outlet slope (OUTSLOPE) – The slope of the cell containing the watershed outlet. This must be a positive decimal number.

Overland Flow

  • ELEVATION dataset
    • Select
  • Solver(OVERTYPE)
    • "ADE" – Alternating Direction Explicit method.
    • "ADE-PC" – Alternating Direction Explicit Predictor-Corrector method. Completes most slowly, but is the most robust.
  • ROUYGH_EXP
  • INTERCEPTION
  • RETENTION
  • AREA_REDUCTION

Infiltration

  • Infiltration type
    • "No infiltration" – Select to not calculate any infiltration.
    • "Green & Ampt w/ soil moisture redistribution (INF_REDIST)" – Specifies infiltration calculations using Green and Ampt with Redistribution method - redistributes soil moisture during periods of no- or low- intensity rainfall
      • Soil moisture depth (SOIL_MOIST_DEPTH)
      • Top layer depth (TOP_LAYER_DEPTH)
    • "Green & Ampt multilayer (INF_LAYERED_SOIL)" – Specifies three layered Green and Ampt infiltration
      • Soil moisture depth (SOIL_MOIST_DEPTH)
    • "Richards' infiltration (INF_RICHARDS)" – Select when using Richards' equation to simulate infiltration.
      • Weight (RICHARDS_WEIGHT) – Used to determine how much weight is placed on upper and lower cells using the arithmetic weighting method for calculating inter-cell hydraulic conductivities.
      • DTHETA MAx (RICHARDS_DTHETA_MAX) – Specifies maximum water content change allowable. Default value = 0.025.
      • C option (RICHARDS_C_OPTION) – Hydraulic conductivity and water capacity values dependent on water content of each cell
      • K option (RICHARDS_K_OPTION) – Inter-cell hydraulic conductivity weighting method - ARITHMETIC or GEOMETRIC
      • Upper option (RICHARDS_UPPER_OPTION) – Selections here compute the hydraulic conductivity at the ground surface
      • Max Iteration (RICHARDS_ITER_MAX) – Maximum number of iterations specified by the user. Default = 1.
      • Max num. cells (MAX_NUMBER_CELLS)
      • Soil moisture depth (SOIL_MOIST_DEPTH) – A decimal depth value in meters.

Channel Routing

  • Channel routing computation scheme
    • "No routing" –
    • "Diffusive wave (DIFFUSIVE_WAVE)" –
      • Allow overbank flow (OVERBANK_FLOW)
      • Allow overland backwater (OVERLAND_BACKWATER)
      • Outlet head BC (HEAD_BOUND / BOUND_DEPTH) – A decimal value in meters
      • Create hot start file –Turn on to create a hot start file.
      • Start from hot start file –Turn on to specify a hot start file.
      • Soil erosion (SOIL_EROSION)
        • Sediment porosity (SED_POROSITY)
        • Water temperature (WATER_TEMP)
        • Sand size (SAND_SIZE)
      • Compute containment transport
        • Decay coefficient (CHAN_DECAY_COEF)
        • Dispersion coefficient (CHAN_DISP_COEF)
        • Initial concentration (INIT_CHAN_CONC)

Output – General

  • Dataset write frequency (MAP_FREQ)
  • Hydrograph write frequency (HYD_FREQ)
  • Output units
    • "English (QOUT_CFS)"
    • "Meters (METRIC)"
  • Suppress screen printing (QUIET)
  • Suppress long term simulation printing (SUPER_QUIET)
  • Strict Julian dates (STRICT_JULIAN_DATE)
  • Output contaminants (ALL_CONTAM_OUTPUT)

Output – Gridded Datasets

Output – Link/Node Datasets

Precipitation