WMS:GSSHA Model Check: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(Redirected page to WMS:GSSHA#Model Check)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
The GSSHA '''Model Check''' command runs through the input data for a GSSHA simulation and looks for obvious inconsistencies and problems with the model. The model checker will not identify values that are outside of plausible ranges, etc., only logical problems. For example, an index map has one or more cells whose ID is 0 (which is not allowed in GSSHA), or a specified process that has an ID with parameters whose values are 0.00 (which indicates an incomplete entry). An example of a problem that the model checker would not find is if a stream arc has a pit that pools water.
#REDIRECT [[WMS:GSSHA#Model Check]]
 
 
[[Image:Dialog_GSSHA_Model_Check.png]]
 
 
==Related Topics==
* [[WMS:GSSHA|GSSHA Overview]]
* [[WMS:GSSHA Stream Arcs|GSSHA Stream Arcs]]
* [[WMS:GSSHA Index Maps|Index Maps]]
* [[WMS:GSSHA Run Simulation|Run GSSHA]]
* [[WMS:GSSHA Job Control|GSSHA Job Control]]
 
{{GSSHAMain
 
|PLinks=
* [http://gsshawiki.com/index.php?title=Model_Construction:Building_a_Basic_GSSHA_Simulation Building a Basic GSSHA Simulation]
** [http://gsshawiki.com/index.php?title=Model_Construction:Verifying_the_basic_model Verifying the Basic Model]
 
|GUMLinks=
* [http://gsshawiki.com/index.php?title=Building_a_Model:Building_a_GSSHA_Model Building a GSSHA Model]
** [http://gsshawiki.com/index.php?title=Building_a_Model:Calibration_and_Verification Calibration and Verification]]
 
}}

Latest revision as of 18:45, 10 May 2019