SMS:TUFLOW Combining 1D and 2D Domains: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 18: Line 18:
The following image shows how 1D/2D linkages are setup both for both items 1 and 3 above.
The following image shows how 1D/2D linkages are setup both for both items 1 and 3 above.


[[Image:TUFLOW transitioning1Dcross 2Ddomain.png]]
[[Image:TUFLOW transitioning1Dcross 2Ddomain.png|thumb|none|left|400 px]]


{{Template:SMSMain}}
 
{{Template:Navbox SMS}}


[[Category:TUFLOW|Combining 1D/2D Domains]]
[[Category:TUFLOW|Combining 1D/2D Domains]]

Revision as of 16:22, 15 November 2012

1D and 2D Domains can be linked in three different ways.

  1. A 2D domain within a 1D domain (1a)
  2. 1D elements representing culverts or pipe networks (1b or 1c)
  3. 1D cross-section based domain for river channel and 2D domain for floodplain (1c)

TUFLOW 1D 2D linking mechanisms.png

Linking 1D Pipe network within a 2D network

The easiest way to link a 1D pipe network to a 2D network is to double click on one of the nodes in the network coverage and define an inlet (connection to the 2D domain). The inlet can be circular or rectangular and the shape and losses can be specified.

Linking 1D domain and 2D domains

Except for pipe networks defined above, linking a 1D network to a 2D network requires several coverages.

  • Network coverage – contains the 1D channels
  • BC coverage – 1D Flow/2D Water Level Connection (HX) or Flow source from a 1D model (SX) arcs define the interface between the 1D and 2D domains.
  • 1D/2D Connections – Arcs connect 1D nodes to ends of 1D Flow/2D Water Level arcs or Flow source arcs. When used with Flow source arcs only 1 connection arc is needed where the 1D Flow/2D Water Level arcs require 2 arcs (one to each end of the arc).

Arcs in the connections coverage must snap to the 1D network nodes and the endpoints of the 1D Flow/2D Water Level Connection arcs. The snapping option setup in the map tab of the preferences dialog should be used to ensure that the nodes are placed correctly.

The following image shows how 1D/2D linkages are setup both for both items 1 and 3 above.

TUFLOW transitioning1Dcross 2Ddomain.png