WMS:HEC-HMS Sources: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
If you wish to run a model that is interior to a larger watershed then you can define a source at the headwaters of a stream within your a model. A source can be defined either as a hydrograph or a constant flow rate. Sources can only be defined at outlet points that do not have upstream reaches or basins defined, i.e. the stream headwaters.
If you wish to run a model that is interior to a larger watershed then you can define a source at the headwaters of a stream within your a model. A source can be defined either as a hydrograph or a constant flow rate. Sources can only be defined at outlet points that do not have upstream reaches or basins defined, i.e. the stream headwaters.


Before you can define a source in the ''HMS properties'' dialog you must first add the source to the outlet. This is done using the '''[[WMS:Adding Sources|Add→Source]]''' command from the [[WMS:Topologic Trees|Tree]] menu.
Before you can define a source in the ''HMS properties'' dialog you must first add the source to the outlet. This is done using the [[WMS:Adding Sources|''Add''|'''Source''']] command from the [[WMS:Topologic Trees|''Tree'']] menu.





Revision as of 19:54, 23 July 2013

If you wish to run a model that is interior to a larger watershed then you can define a source at the headwaters of a stream within your a model. A source can be defined either as a hydrograph or a constant flow rate. Sources can only be defined at outlet points that do not have upstream reaches or basins defined, i.e. the stream headwaters.

Before you can define a source in the HMS properties dialog you must first add the source to the outlet. This is done using the Add|Source command from the Tree menu.


Related Topics