|
|
| Line 1: |
Line 1: |
| To access the HYDR Parameters dialog box, press the '''HYDR''' button in the ''Reach/Reservoir Activity'' dialog box. The ''HYDR Parameters'' dialog box lets the user enter the parameters for the following HYDR input tables: HYDR-PARM1, HYDR-PARM2, and HYDR-INIT. The following monthly value tables may also be input from this dialog if required: MON-CONVF. Other tables used to set up “categories” to be simulated are not supported in WMS. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the HYDR-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(3).2 – HYDR Input of the HSPF Manual.[http://water.usgs.gov/software/HSPF/]
| | #REDIRECT [[WMS:HSPF Modules]] |
| | |
| In addition to the fields and buttons to edit HYDR input variables, a few other buttons exist in this dialog. The '''Print Info''' button leads to a dialog where the PRINT-INFO block for RCHRES segments may be set up (see Section 4.4(3).1.2 of the HSPF Manual). The '''Define FTABLE''' button leads to a dialog where the FTABLE for the selected reach/reservoir may be input (see Section 4.5 – FTABLES Input of the HSPF Manual). This functionality will also be discussed later.
| |
| | |
| | |
| ==Related Topics==
| |
| * [[WMS:HSPF Modules|HSPF Modules]]
| |
| | |
| | |
| {{WMSMain}}
| |
