WMS:HSPF PWATER: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
To access the PWATER Parameters dialog box, press the '''PWATER''' button in the Pervious Land Activity dialog box. The PWATER Parameters dialog box lets the user enter the main parameters for the PWATER input tables: PWAT-PARM1, PWAT-PARM2, PWAT-PARM3, PWAT-PARM4 and PWAT-STATE1. The following monthly value tables may also be input from this dialog if required: MON-INTERCEP, MON-UZSN, MON-MANNING, MON-INTERFLW, MON-IRC, and MON-LZETPARM. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the PWAT-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(1).4 | To access the ''PWATER Parameters'' dialog box, press the '''PWATER''' button in the ''Pervious Land Activity'' dialog box. The ''PWATER Parameters'' dialog box lets the user enter the main parameters for the PWATER input tables: PWAT-PARM1, PWAT-PARM2, PWAT-PARM3, PWAT-PARM4 and PWAT-STATE1. The following monthly value tables may also be input from this dialog if required: MON-INTERCEP, MON-UZSN, MON-MANNING, MON-INTERFLW, MON-IRC, and MON-LZETPARM. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the PWAT-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(1).4 – PWATER Input of the HSPF Manual.[http://water.usgs.gov/software/HSPF/] | ||
Revision as of 19:40, 18 February 2013
To access the PWATER Parameters dialog box, press the PWATER button in the Pervious Land Activity dialog box. The PWATER Parameters dialog box lets the user enter the main parameters for the PWATER input tables: PWAT-PARM1, PWAT-PARM2, PWAT-PARM3, PWAT-PARM4 and PWAT-STATE1. The following monthly value tables may also be input from this dialog if required: MON-INTERCEP, MON-UZSN, MON-MANNING, MON-INTERFLW, MON-IRC, and MON-LZETPARM. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the PWAT-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(1).4 – PWATER Input of the HSPF Manual.[1]
Related Topics
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
