WMS:HSPF HYDR

From XMS Wiki
Revision as of 20:18, 18 February 2013 by Jcreer (talk | contribs)
Jump to navigationJump to search

To access the HYDR Parameters dialog box, press the HYDR button in the Reach/Reservoir Activity dialog box. The HYDR Parameters dialog box lets the user enter the parameters for the following HYDR input tables: HYDR-PARM1, HYDR-PARM2, and HYDR-INIT. The following monthly value tables may also be input from this dialog if required: MON-CONVF. Other tables used to set up “categories” to be simulated are not supported in WMS. Some parameters require a single value for the entire simulation and others are allowed to vary monthly, depending on the flags set in the HYDR-PARM1 table. For information on the definition and function of specific variables in this module, see Section 4.4(3).2 – HYDR Input of the HSPF Manual.[1]

In addition to the fields and buttons to edit HYDR input variables, a few other buttons exist in this dialog. The Print Info button leads to a dialog where the PRINT-INFO block for RCHRES segments may be set up (see Section 4.4(3).1.2 of the HSPF Manual[2]). The Define FTABLE button leads to a dialog where the FTABLE for the selected reach/reservoir may be input (see Section 4.5 – FTABLES Input of the HSPF Manual). This functionality will also be discussed later.


Related Topics