Difference between revisions of "AHGW:Add Borehole Image Wizard"

From XMS Wiki
Jump to navigationJump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
The ''Add Borehole Wizard'' can be used to register a digital borehole image for use in building 2D cross sections. The wizard contains three steps; Cross Section Setup, Image Register, and Image Positioning.
+
{{TOC right}}
 
+
The ''Add Borehole Image Wizard'' dialog is accessed by clicking [[File:ArcGIS Select Features icon.png]] '''Select Features''', selecting the desired well, clicking [[File:AHGW Add Background to Borehole Icon.png]] '''Add Borehole Image Wizard''' on the [[AHGW:Arc Hydro Groundwater Toolbar|Arc Hydro Groundwater Toolbar]], and then selecting the desired section line. This tool helps register a digital borehole image for use in building 2D cross sections in [[ArcGIS]].
==Step 1: Cross Section Setup==
 
[[File:AHGW-CreateBoreholeImageWizard1.png|thumb|450 px|Step 1 of the ''Add Borehole Image Wizard'']]
 
  
 +
The dialog contains the following pages:
 +
*Step 1: Cross Section Setup
 +
*Step 2: Image Register
 +
*Step 3: Image Positioning
  
 +
==Cross Section Setup==
 +
[[File:AHGW-CreateBoreholeImageWizard1.png|thumb|400px|Step 1 of the ''Add Borehole Image Wizard'']]
 +
The following sections, options, and fields are available:
 +
*''Section Line Properties'' section – Not user editable. Lists attributes of the selected section line.
 +
*''Well Properties'' section – The left side contains two drop-downs, while the right side indicates the well's location along the section line and the WellID.
 +
**''Well layer'' – Select the name of the well layer from the drop-down.
 +
**''Unique ID field'' *ndash; Select the name of the field to use as the unique ID field.
 +
*''Cross Section Setup'' section
 +
**''XS2D Catalog Table'' – Select the name of the XS2D catalog table from the drop-down.
 +
**''Data Frame'' – Select the desired data frame.
 +
*''Image File'' section
 +
**''Image file to add to XS2D Cross Section'' – The path to the desired borehole image. Click [[File:Dot dot dot button.png|16px]] to bring up the Open XS2D Image File'' dialog to allow selection of the desired file.
 +
*'''Next''' – Switches to the [[#Image Register|second page]] of the ''Add Borehole Image Wizard'' dialog.
 +
*'''Cancel''' – Cancels any changes and exits the ''Add Borehole Image Wizard'' dialog.
 
{{-}}
 
{{-}}
 
+
==Image Register ==
==Step 2: Image Register ==
+
[[File:AHGW-CreateBoreholeImageWizard2.png|thumb|400 px|Step 2 of the ''Add Borehole Image Wizard'']]
[[File:AHGW-CreateBoreholeImageWizard2.png|thumb|450 px|Step 2 of the ''Add Borehole Image Wizard'']]
+
The following sections, options, and fields are available:
 
+
*''Image'' section – Displays the image selected on the [[#Cross Section Setup|first page]] of the dialog. The scroll buttons on the left and right sides allow the ''ZTop'' and "ZBottom" (respectively) to be manually changed. This affects the width of the resulting plot. The "(pixel)" fields in the ''Coordinates'' section change as the scroll buttons are adjusted.
 +
*''Coordinates'' section
 +
**''Z Top'' – Enter a decimal number for the Z magnification. This number must be greater than the value of ''Z Bottom''.
 +
**''Z Bottom'' – Enter a decimal number for the Z magnification.
 +
*'''Back''' – Switches to the [[#Cross Section Setup|first page]] of the ''Add Borehole Image Wizard'' dialog.
 +
*'''Next''' – Switches to the [[#Image Positioning|third page]] of the ''Add Borehole Image Wizard'' dialog.
 +
*'''Cancel''' – Cancels any changes and exits the ''Add Borehole Image Wizard'' dialog.
 
{{-}}
 
{{-}}
 
+
==Image Positioning ==
==Step 2: Image Positioning ==
+
[[File:AHGW-CreateBoreholeImageWizard3.png|thumb|400 px|Step 3 of the ''Add Borehole Image Wizard'']]
[[File:AHGW-CreateBoreholeImageWizard3.png|thumb|450 px|Step 3 of the ''Add Borehole Image Wizard'']]
+
The following sections, options, and fields are available:
 
+
*''Image'' section – Displays a cross section view of the section line.
 +
*''Positioning'' section
 +
**''Offset'' – Decimal value. Size of the offset (if any) from the left side of the image.
 +
**''Plot width in map units'' – Decimal value. A value indicating the width of the plot in map units (e.g., meters, feet).
 +
*'''Back''' – Switches to the [[#Image Register|second page]] of the ''Add Borehole Image Wizard'' dialog.
 +
*'''Finish''' – Saves any changes and exits the ''Add Borehole Image Wizard'' dialog.
 +
*'''Cancel''' – Cancels any changes and exits the ''Add Borehole Image Wizard'' dialog.
 
{{-}}
 
{{-}}
  
 
{{Navbox AHGW}}
 
{{Navbox AHGW}}
 
[[Category:AHGW General Information|Toolbars]]
 
[[Category:AHGW General Information|Toolbars]]

Latest revision as of 22:15, 7 November 2019


The Add Borehole Image Wizard dialog is accessed by clicking ArcGIS Select Features icon.png Select Features, selecting the desired well, clicking AHGW Add Borehole Image Wizard Icon.png Add Borehole Image Wizard on the Arc Hydro Groundwater Toolbar, and then selecting the desired section line. This tool helps register a digital borehole image for use in building 2D cross sections in ArcGIS.

The dialog contains the following pages:

  • Step 1: Cross Section Setup
  • Step 2: Image Register
  • Step 3: Image Positioning

Cross Section Setup

Step 1 of the Add Borehole Image Wizard

The following sections, options, and fields are available:

  • Section Line Properties section – Not user editable. Lists attributes of the selected section line.
  • Well Properties section – The left side contains two drop-downs, while the right side indicates the well's location along the section line and the WellID.
    • Well layer – Select the name of the well layer from the drop-down.
    • Unique ID field *ndash; Select the name of the field to use as the unique ID field.
  • Cross Section Setup section
    • XS2D Catalog Table – Select the name of the XS2D catalog table from the drop-down.
    • Data Frame – Select the desired data frame.
  • Image File section
    • Image file to add to XS2D Cross Section – The path to the desired borehole image. Click Dot dot dot button.png to bring up the Open XS2D Image File dialog to allow selection of the desired file.
  • Next – Switches to the second page of the Add Borehole Image Wizard dialog.
  • Cancel – Cancels any changes and exits the Add Borehole Image Wizard dialog.


Image Register

Step 2 of the Add Borehole Image Wizard

The following sections, options, and fields are available:

  • Image section – Displays the image selected on the first page of the dialog. The scroll buttons on the left and right sides allow the ZTop and "ZBottom" (respectively) to be manually changed. This affects the width of the resulting plot. The "(pixel)" fields in the Coordinates section change as the scroll buttons are adjusted.
  • Coordinates section
    • Z Top – Enter a decimal number for the Z magnification. This number must be greater than the value of Z Bottom.
    • Z Bottom – Enter a decimal number for the Z magnification.
  • Back – Switches to the first page of the Add Borehole Image Wizard dialog.
  • Next – Switches to the third page of the Add Borehole Image Wizard dialog.
  • Cancel – Cancels any changes and exits the Add Borehole Image Wizard dialog.


Image Positioning

Step 3 of the Add Borehole Image Wizard

The following sections, options, and fields are available:

  • Image section – Displays a cross section view of the section line.
  • Positioning section
    • Offset – Decimal value. Size of the offset (if any) from the left side of the image.
    • Plot width in map units – Decimal value. A value indicating the width of the plot in map units (e.g., meters, feet).
  • Back – Switches to the second page of the Add Borehole Image Wizard dialog.
  • Finish – Saves any changes and exits the Add Borehole Image Wizard dialog.
  • Cancel – Cancels any changes and exits the Add Borehole Image Wizard dialog.