AHGW:Transform XS2D Well Detail Line: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "350px|thumb|right|''Transform XS2D Well Detail Line'' dialog The ''Transform XS2D Well Detai...")
 
m (Move page script moved page AHGW:Transform XS2D Well Detail Line to Test:Transform XS2D Well Detail Line without leaving a redirect)
(No difference)

Revision as of 23:41, 9 September 2019

Transform XS2D Well Detail Line dialog

The Transform XS2D Well Detail Line tool is accessed by double-clicking on "ArcGIS Tool icon 10 5.png Transform XS2D Well Detail Line" under the "ArcGIS Toolset icon 10 5.png XS2D Editor" toolset under the "ArcGIS Toolset icon 10 5.png Subsurface Analyst" toolset under the "ArcGIS Toolbox icon 10 5.png Arc Hydro Groundwater Tools" toolbox. This tool adds well construction diagrams in XS2D space.

The following fields are available. Required fields are marked with a ArcGIS required - green circle icon.png icon. Fields marked with a ArcGIS Error icon.png icon may either not be supported or the table doesn't exist.

  • Input XS2D_Catalog Table – Click the ArcGIS Browse button 10 5.png button to bring up the Input XS2D_Catalog Table dialog in order to specify the XS2D_Catalog table as defined by the Arc Hydro Groundwater Data Model. This table stores information about the feature classes associated with a SectionLine, where well construction features will be created.
  • Input Well Features – Click the ArcGIS Browse button 10 5.png button to bring up the Input Well Features dialog in order to specify the well point features associated with the well construction details.
  • ArcGIS required - green circle icon.png Input GeoSection Features – Select from the drop-down the field in the Well features that represents the elevation of the well points, from which the depth is referenced. If the Well features are not Z-Enabled, you will need to specify this field. If the Well features are Z-Enabled, you can optionally leave this field blank, and the Z coordinate will be used as the elevation of the wells.
  • Input SectionLine Features – Click the ArcGIS Browse button 10 5.png button to bring up the Input SectionLine Features dialog in order to specify the input line features representing section lines.
  • ArcGIS required - green circle icon.png SectionLine ID – Enter the HydroID of the section line feature to process.
  • ArcGIS required - green circle icon.png XS2DType – Select from the drop-down the type of feature class to store the well construction features in, based on the XS2DType field in the XS2D_Catalog table.
  • ArcGIS required - green circle icon.png FType – Enter the feature type value to store on the newly created well construction features.
  • Input Well Construction Table – Click the ArcGIS Browse button 10 5.png button to bring up the Input Well Construction Table dialog in order to specify the table containing the well construction information.
  • ArcGIS required - green circle icon.png Well Construction WellID Field – Select from the drop-down the field in the well construction table that associates with the HydroID of the Well features.
  • ArcGIS required - green circle icon.png Well Construction From Depth Field – Select from the drop-down the starting depth beneath the well where the well construction feature is created.
  • ArcGIS required - green circle icon.png Well Construction To Depth Field – Select from the drop-down the ending depth beneath the well where the well construction feature is created.
  • Data Type Field for filtering – Optional. Select from the drop-down the filter data type value from the well construction table. This might be used if your well construction table is organized such that all the well construction values are stored in the same field, with a separate field representing the type of data being stored (such as grout, screen, etc.). This way, you can filter out all of the data and only look at one particular data type. If your well construction data is stored in a separate field for each data type, or your well construction table only contains one type of data, do not use this parameter.
  • Data Type value for filtering – Optional. Used only in conjunction with the "Data Type Field for filtering" option. This parameter specifies the well construction type to filter on, when more than one data type is stored in the data value field.