ArcObjects: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(23 intermediate revisions by 2 users not shown)
Line 1: Line 1:
ArcObjects® is a development platform provided by [http://www.esri.com/ ESRI®] that allows developers of other applications to incorporate ArcView/ArcGIS® capability directly within their application. ArcObjects® is used to incorporate ArcView® functionalities into XMS software. This allows users to use ArcView® functionality within XMS software. In order to use ArcView® functionality, a current license of ArcView® must be installed. Without a license, much of the same functionality is available, the primary differences being that only the shapefile format is supported, and many of the selection and display capabilities are minimal.
{{GMS Deprecated Feature}}
ArcObjects® is a development platform provided by [http://www.esri.com/ ESRI®] that allows developers of other applications to incorporate ArcGIS/ArcView® capability directly within their application. ArcObjects is used to incorporate ArcGIS® functionalities into XMS software. This allows using ArcGIS/ArcMap/ArcView® functionality within XMS software. In order to use ArcGIS functionality, a current license of ArcGIS must be installed. Without a license, much of the same functionality is available, the primary differences being that only the shapefile format is supported, and many of the selection and display capabilities are minimal.
 
ArcObjects® are enabled by using the ''Data'' | '''Enable ArcObjects®''' command in the GIS module. A few of the typical processes used in XMS must be done differently when ArcObjects® are enabled, such as importing shapefiles using the '''Add Data''' command instead of using the '''Open''' or '''Add Shapefile Data''' commands. 
 
ArcObjects® will not work in the 64-bit versions of SMS, GMS, and WMS.
 
==Error Enabling ArcObjects==
If the DLL "EMRL_LicCheckMod.dll" fails to register automatically, selecting the '''Enable ArcObjects''' command will bring up the error:
:"ArcObjects could not be enabled: please check installation and licensing for ArcGIS"
 
To fix this, register the DLL manually by following the steps below.
 
# Bring up a command prompt window.
# Type in 'regsvr32 "<directory where XMS was installed>\EMRL_LicCheckMod.dll"
#:For example, the default location for GMS 7.0 is "C:\Program Files\GMS 7.0".  If the program was installed in the default location, for example, this line in the command prompt window will be: regsvr32 "C:\Program Files\GMS 7.0\EMRL_LicCheckMod.dll"
# Hit enter to run.
# Restart XMS


==Related Topics==
==Related Topics==
Line 13: Line 30:
[[Category:GIS|A]]
[[Category:GIS|A]]
[[Category:General Information|A]]
[[Category:General Information|A]]
[[Category:External Links]]

Latest revision as of 23:07, 3 October 2018

ArcObjects® is a development platform provided by ESRI® that allows developers of other applications to incorporate ArcGIS/ArcView® capability directly within their application. ArcObjects is used to incorporate ArcGIS® functionalities into XMS software. This allows using ArcGIS/ArcMap/ArcView® functionality within XMS software. In order to use ArcGIS functionality, a current license of ArcGIS must be installed. Without a license, much of the same functionality is available, the primary differences being that only the shapefile format is supported, and many of the selection and display capabilities are minimal.

ArcObjects® are enabled by using the Data | Enable ArcObjects® command in the GIS module. A few of the typical processes used in XMS must be done differently when ArcObjects® are enabled, such as importing shapefiles using the Add Data command instead of using the Open or Add Shapefile Data commands.

ArcObjects® will not work in the 64-bit versions of SMS, GMS, and WMS.

Error Enabling ArcObjects

If the DLL "EMRL_LicCheckMod.dll" fails to register automatically, selecting the Enable ArcObjects command will bring up the error:

"ArcObjects could not be enabled: please check installation and licensing for ArcGIS"

To fix this, register the DLL manually by following the steps below.

  1. Bring up a command prompt window.
  2. Type in 'regsvr32 "<directory where XMS was installed>\EMRL_LicCheckMod.dll"
    For example, the default location for GMS 7.0 is "C:\Program Files\GMS 7.0". If the program was installed in the default location, for example, this line in the command prompt window will be: regsvr32 "C:\Program Files\GMS 7.0\EMRL_LicCheckMod.dll"
  3. Hit enter to run.
  4. Restart XMS

Related Topics