GMS:MODFLOW-NWT

From XMS Wiki
Revision as of 14:21, 29 September 2011 by Bdolinar (talk | contribs)
Jump to navigationJump to search

Starting at GMS version 8.2, GMS supports MODFLOW-NWT.MODFLOW-NWT is a version of MODFLOW based on MODFLOW-2005 that provides a different formulation of the groundwater flow equation designed to solve models that are non-linear due to unconfined cells or non-linear boundary conditions.

Choosing MODFLOW Version

Choosing to use MODFLOW 2000, MODFLOW 2005, or MODFLOW-NWT is done in the MODFLOW Global Options Dialog. At any time you can switch from one to the other.

MODFLOW Global Option Dialog

Changes to MODFLOW 2005

1. UPW Package
  • MODFLOW-NWT contains the UPW flow package. The UPW flow package is based on the LPF package but differs in that the rewetting and vertical conductance correction options are not available. It also differs from the LPF package in that it smoothes the horizontal conductance and storage change functions to have a continuous derivatives so they can be solved by the Newton method. Using the UPW package requires using the NWT solver.
2. NWT Solver
  • MODFLOW-NWT contains the NWT solver package. Using the NWT solver requires twice the memory of other MODFLOW solvers because using the Newton method results in an asymmetric matrix. Because of the asymmetric matrix a different matrix solver must be used. The NWT package provides an option to use one of two matrix solvers: a generalized-minimum-residual (GMRES) solver and an Orthomin/stabilized conjugate-gradient solver called chi-MD. The NWT solver must be used when using the UPW flow package.
3. WEL Package
4. SFR Package
5. UZF Package