GMS:MODFLOW Grid Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
Line 75: Line 75:


[[Category:MODFLOW|Grid]]
[[Category:MODFLOW|Grid]]
[[Category:MODFLOW Workflows]]
[[Category:MODFLOW Workflows|Grid]]

Latest revision as of 16:32, 6 February 2017

This is a top level workflow. This workflow includes all of the specific workflows needed in creating a general MODFLOW project using the grid approach. Newer and infrequent GMS users should start here.

To build a MODFLOW grid approach model in GMS, use the following steps:

1. Start GMS.
1. Start GMS, or clear existing projects in GMS.
  1. If GMS is already running, select File | New.
  2. A new project can also be started by clicking New New Macro.svg.
2. If necessary, register or update GMS.
1. Register GMS and components.
  1. Launch the GMS Registration Wizard.
  2. Follow the Registration Wizard instructions.
  3. Review the registered components in the Aquaveo License Registration dialog.
2. Update GMS.
GMS can be updated by doing any of the following:
  1. Select Download if prompted to update when starting GMS.
  2. Select Help | Check For Updates.
  3. Go directly to the GMS download page.
3. Set the display projection.
  1. Select the Edit | Units... command.
  2. In the Units dialog, set the time, mass, force, and concentration.
  3. Click the Dot dot dot button.png button and set the horizontal and vertical projection in the Display Projection dialog.
  4. If necessary, use the Horizontal Projection dialog to set a global projection.
2. Import data.
1. Gather and open image files.

Images are imported into the GIS module in GMS.

1. Open local images.
  1. Load images from local computer files using the File | Open... command.
  2. Alternatively, drag and drop the file into the Graphics Window in GMS.
2. Import images from the web.
  1. Use the Add Online Maps Add Online Maps Icon.svg macro.
  2. Select a location in the Virtual Earth Map Locator.
  3. If a projection has not been set for the project, set a new project in the Display Projection dialog.
  4. Use the Data Service Options dialog to select a web service.
2. Gather and open geometric data files.
1. Import map data.
  1. Use the File | Open... command to import map data such as Map files, boundary ID files, or boundary XY files.
  2. Alternately, drag and drop the file into the Graphics Window in GMS.
2. Import GIS data.
  1. Use the File | Open... command to import GIS data files such as Shapefiles or raster files.
  2. Alternatively, drag and drop the file into the Graphics Window in GMS.
3. Import scatter data.
  1. Use File | Open... to open files with scatter data.
    • Alternatively, drag and drop the file into the Graphics Window in GMS.
  2. Use the File Import Wizard to specify how to import the data.
4. Import CAD data.
  1. Verify the CAD file type is readable by GMS before importing it. GMS can import DXF and DWG files.
  2. Use the File | Open... command to launch the Open dialog (or drag and drop) to import the CAD files.
The data should load in layers into the Project Explorer.
5. Review and set object projections.
  1. Right-click on an object in the Project Explorer and select the Projection | Projection command.
  2. Set the horizontal and vertical projection using the Object Projection dialog.
  3. To set a global projection, use the Horizontal Projection dialog.
3. Gather hydrologic data files.
  1. Gather data files for hydrologic and hydraulic data. These include data such as hydrographs, water levels, and rating curves. They will be imported when setting boundary conditions and when doing model calibration.
3. Review and edit elevation data.
1. Review elevation data for errors.
1. Use the Dataset Info dialog.
  1. Find the "Z", "elevation" or "depth" datasets on the geometric object (mesh, TIN, grid, raster) that is being reviewed
  2. Right-click on elevation data and select Properties.
  3. Review information in the Dataset Info dialog to see that the range of values are as expected.
2. Use contour display options.
  1. Turn on Contours in the Display Options dialog and set contour options. The "Color Fill" option is recommended for this.
  2. Look for inconsistent points (points with values much higher/lower than their neighbors or regions where no data points exist).
  3. Verify that the region being modeled is covered by the elevation/depth data and there are no holes.
2. Remove erroneous points.
After reviewing the imported data, points covering regions of no data should be deleted.
1. Edit dataset values.
  1. Open the Dataset Info dialog through the dataset Properties right-click command.
  2. Open the Edit Dataset Values dialog.
2. Define active or inactive points.
  1. Open the Dataset Info dialog through the dataset Properties right-click command.
  2. Open the Active/Inactive Flags dialog.
3. Manually remove points.
  1. Use the Select Scatter Point Select Point Tool.svg tool to select erroneous points.
  2. Review and edit point data in the XYZF Bar.
  3. Delete erroneous points.
3. Merge elevation datasets.
  1. Using the Select Scatter Point Set Select Scatter Set Tool.svg tool, select multiple scatter point sets in the Graphics Window.
  2. Select the Scatter Points | Merge Scatter Point Sets command.
  3. In the Scatter Point Set Name dialog assign a name to the new scatter set.
4. Create a grid.
Create either a 3D grid or a 3D UGrid by completing one of the following:
1. Creating a 3D grid.
1. Create a 3D grid from scratch.
  1. Right-click in the Project Explorer and select New | 3D Grid....
  2. In the Create Finite Difference Grid dialog, enter the information for the X-, Y-, and Z-Dimension of the grid.
2. Create a 3D grid using a grid frame.
  1. Right-click in the Project Explorer and select the New | Grid Frame... command.
  2. Using the Select Grid Frame Select Grid Frame Tool.svg tool, right-click on the grid and select the Fit to Active Coverage command.
  3. Select the Feature Objects | Map → 3D Grid... menu command.
  4. In the Create Finite Difference Grid dialog, enter the information for the X-, Y-, and Z-Dimension of the grid.
2. Creating a 3D UGrid.
Create a 3D UGrid in one of the following ways:
1. Create a 3D UGrid from scratch.
  1. Right-click in the Project Explorer and select New | UGrid 3D....
  2. In the New UGrid dialog, enter the information for the X-, Y-, and Z-Dimension of the grid.
2. Create a 3D UGrid from a coverage.
  1. Right-click on the desired coverage and select the Map To | UGrid command.
  2. In the Map → UGrid dialog, set the Dimension drop-down to "3D".
  3. Enter the rest of the information for the grid, including the X-, Y-, and Z-Dimension information.
5. Set up the MODFLOW simulation.
1. Create a MODFLOW simulation.
  1. Select the 3D Grid Icon.svg 3D grid or UGrid Module Icon.svg UGrid in the the Project Explorer.
  2. Select the MODFLOW | New SImulation... command.
2. Set up the MODFLOW Global/Basic Package options.
  1. If necessary, select the MODFLOW | Global Options... command.
  2. In the MODFLOW Global/Basic Package dialog, set all the appropriate parameters:
  • Arrays
    • IBOUND
    • Starting heads
    • Top and bottom elevations
    • Confining beds
    • Porosity
6. Set up package parameters.
  1. Set up global and output package parameters.
  2. Set up flow package parameters.
  3. Set up solver package parameters.
  4. Set up optional package parameters.
7. Run MODFLOW.
  1. Save Save Macro.svg the project.
  2. Run MODFLOW Run MODFLOW Macro.svg.
8. Visualize the Solution.
1. Change display options.
1. Set display options.
  1. Open the Display Options Display Options Macro.svg dialog.
  2. Set the general display options.
  3. Set general lighting options.
  4. Set display options for each module that is being used.
  5. Set contour options.
  6. Set vector options.
2. View display.
  1. Use the Rotate Rotate Tool.svg, Pan Pan Tool.svg, and Zoom Zoom Tool Icon.svg tools.
  2. Use the View menu commands found in the Display menu.
  3. Use the Frame Frame Macro.svg command to center and resize the display as needed.
3. Adjust display.
Display may need to be adjusted during the remainder of the project.
  1. Use the Display Options dialog and viewing tools as needed.
  2. Use the Frame Frame Macro.svg command to center and resize the display as needed.
2. Change contour options.
  1. Turn on Contours in the Display Options dialog and set contour options. The "Color Fill" option is recommended for this.
  2. Look for inconsistent points (points with values much higher/lower than their neighbors or regions where no data points exist).
  3. Verify that the region being modeled is covered by the elevation/depth data and there are no holes.
3. Create a plot.
1. Start the plot wizard.
  1. Select the Display | Plot Wizard menu command.
2. Select available plot type.
1. Computed vs. Observed Data plots.
1. Computed vs. Observed Data.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Computed vs. Observed Data" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
2. Computed vs. Observed Data (Weighted).
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Computed vs. Observed Data (Weighted)" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
2. Residual vs. Observed Data plots.
1. Residual vs. Observed Data.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Residual vs. Observed" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
2. Residual vs. Observed Data (Weighted).
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Residual vs. Observed (Weighted)" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
3. Parameter Sensitivity plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Parameter Sensitivity" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
4. Error vs. Simulation plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Error vs. Simulation" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
5. Error vs. Time Step plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Error vs. Time Step" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
6. Error Summary plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Error Summary" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
7. Time Series plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Time Series" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
8. Active Dataset Time Series plot.
  1. Select a dataset in Project Explorer.
  2. Select cells in the project.
  3. Select Display | Plot Wizard to start the Plot Wizard.
  4. Select the "Active Dataset Time Series" option on the left and click Next.
  5. Specify plot options in step 2 of the Plot Wizard then click Finish.
  6. Review plot window.
9. S/S Flow vs. Time plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "S/S Flow vs. Time" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
10. Flow Budget vs. Time plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Flow Budget vs. Time" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
11. Gage Package Value vs. Time plot.
  1. Select Display | Plot Wizard to start the Plot Wizard.
  2. Select the "Gage Package Value vs. Time" option on the left and click Next.
  3. Specify plot options in step 2 of the Plot Wizard then click Finish.
  4. Review plot window.
4. Create an animation.
  1. Select a solution dataset and use the Display | Animate menu command.
  2. Use the Animation Wizard to specify the animation parameters.
  3. Save and view the animation file.
5. Review the zone and flow budgets.
  1. Select MODFLOW | Flow Budget....
  2. Review the flow data on the Cells and Zones tabs in the Flow Budget dialog.
  3. Generate water budget data on the USGS ZONEBUDGET tab.