# GMS:Solid Properties

From XMS Wiki

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The *Solid Properties* dialog allows the user to edit/view attributes of the selected solid. This dialog can be accessed by selecting a solid from the Project Explorer, right-clicking to access the pop up menu, and selecting the **Properties** command. It can also be accessed by double-clicking on a solid in the graphics window, or by selecting a solid and then selecting the **Properties** command from the *Edit* menu.

The following items can be edited in the *Properties* dialog:

*Solid Name*– Name of the solid.*Solid Material*– Material associated with the solid. The list will only show materials contained in the*Materials*dialog.*Begin Layer*– Beginning grid layer assigned to solid used with the**Solids→MODFLOW**procedure.*End Layer*– Ending grid layer assigned to solid used with the**Solids→MODFLOW**procedure.*Use top cell bias*– Option for using the top cell bias used with the**Solids→MODFLOW**procedure.*Top cell bias*– The percent to bias the thickness of the top cell with the**Solids→MODFLOW**procedure.*Target min. cell thickness*– Minimum cell thickness used with the**Solids→MODFLOW**procedure.

The following items are displayed as information about the solid and cannot be edited in the dialog:

*Number vertices*– Total number of vertices used in the solid.*Number triangles*– Total number of traingle elements used in the solid.*Max x*– The maximum distance away from the origin on the x-axis.*Min x*– The minimum distance away from the origin on the x-axis.*Max y*– The maximum distance away from the origin on the y-axis.*Min y*– The minimum distance away from the origin on the y-axis.*Max z*– The maximum distance away from the origin on the z-axis.*Min z*– The minimum distance away from the origin on the z-axis.*Centroid,x*– The point on the x-axis that is at the center of the solid.*Centroid,y*– The point on the y-axis that is at the center of the solid.*Centroid,z*– The point on the z-axis that is at the center of the solid.*Volume*– The calculated volume of the solid.*Projection*– The projection coordinates the solid is using.

GMS – Groundwater Modeling System | ||
---|---|---|

Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids | |

Models: | FEFLOW • FEMWATER • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |

Aquaveo |