GMS:UGrid Viewing Modes: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
The UGrid module contains two viewing modes unique to the module.
The UGrid module contains two viewing modes unique to the module.
==Single Layer View==
==Single Layer View==
UGrid cells can be assigned to a layer. The layer for the cell is displayed in the Cell Properties. The Single layer toolbar can be used to view one layer at a time. This is somewhat analogous to the 3D Grid ortho mode but works for all viewing angles.
UGrid cells can be assigned to a layer. The layer for the cell is displayed in the [[GMS:UGrid Cell Properties|''Cell Properties'']] dialog. The ''Single layer'' toolbar can be used to view one layer at a time. This is somewhat analogous to the 3D grid ortho mode but works for all viewing angles.


This toolbar can be turned on or off by using the ''Display'' | ''Toolbars'' | '''UGrid Siingle Layer''' menu command.
This toolbar can be turned on or off by using the ''Display'' | ''Toolbars'' | '''UGrid Single Layer''' menu command.


[[Image:SingleLayerToolbar.png]]
[[Image:SingleLayerToolbar.png]]


==Symbols On Top==
==Symbols on Top==


When cell faces are turned on, or color filled contours which result in a filled face, the symbols which are normally displayed at the cell centroid are displayed at the center of the top face of the cell. This allows them to be seen, although the symbol may still be partially obscured by the filled cell face.
When cell faces are turned on, or color filled contours which result in a filled face, the symbols which are normally displayed at the cell centroid are displayed at the center of the top face of the cell. This allows them to be seen, although the symbol may still be partially obscured by the filled cell face.
Line 14: Line 14:


{{Navbox GMS}}
{{Navbox GMS}}
[[Category:UGrid]]
[[Category:UGrid|View]]


{{stub}}
{{stub}}

Latest revision as of 15:39, 28 November 2017

UGrid Module
VoronoiUGrid.png
UGrid
Creating and Editing
Viewing Modes
Converting to Other Data Types
Exporting UGrids
UGrid Interpolation
More
Display Options
Tool Palette
Cell Properties
UGrid Commands

The UGrid module contains two viewing modes unique to the module.

Single Layer View

UGrid cells can be assigned to a layer. The layer for the cell is displayed in the Cell Properties dialog. The Single layer toolbar can be used to view one layer at a time. This is somewhat analogous to the 3D grid ortho mode but works for all viewing angles.

This toolbar can be turned on or off by using the Display | Toolbars | UGrid Single Layer menu command.

SingleLayerToolbar.png

Symbols on Top

When cell faces are turned on, or color filled contours which result in a filled face, the symbols which are normally displayed at the cell centroid are displayed at the center of the top face of the cell. This allows them to be seen, although the symbol may still be partially obscured by the filled cell face.