HY8:Culvert Crossing Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
 
(22 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Input Crossing and Culvert data==
==Input Crossing and Culvert data==
The user may choose up to 99 barrels for each culvert that is defined by the same site conditions, shape configuration, inlet type, and "n", and/or up to 6 independent culverts.  In both cases the culverts share the same headwater pool, tailwater pool or channel, and roadway characteristics.  The input properties define the crossing and culvert.  The data defining each culvert are entered in the input parameters widow.  This window is accessed from the File menu, or from Project Explorer window by right clicking on the culvert or crossing and selecting "Culvert Crossing Data" from the list. The user may also select the culvert properties icon from the tool bar .  From the Culvert Crossing Data window, the site, culvert, tailwater, discharge, and roadway data are all entered.
The user may choose up to 99 barrels for each culvert that is defined by the same site conditions, shape configuration, culvert type, and "n", and/or up to 6 independent culverts.  In both cases the culverts share the same headwater pool, tailwater pool or channel, and roadway characteristics.  The input properties define the crossing and culvert.  The data defining each culvert are entered in the input parameters widow.  This window is accessed from the ''File'' menu, or by selecting '''Culvert Crossing Data''' from the Project Explorer culvert or crossing [[File:HY-8 CircularCrossingFolderIcon.png]] right-click menu, or selecting the '''Culvert Crossing Data''' [[File:CulverCrossingDataIcon.png]] icon from the toolbar.  From the ''Culvert Crossing Data'' window, the site, culvert, tailwater, discharge, and roadway data are all entered.




[[Image:HY8image30.jpg]]
[[Image:HY8image RightClickMenu.jpg|thumb|none|425 px|Right-click culvert or crossing menu in the HY-8 Project Explorer.]]
 


==Culvert Crossing Data Window==
==Culvert Crossing Data Window==
All of the parameters necessary to define crossing and culvert information can be defined from the Culvert Crossing Data Window as shown below.
All of the parameters necessary to define crossing and culvert information can be defined from the ''Culvert/Crossing Data'' window as shown below.
 
 
[[Image:HY8image48.gif]]
 


{{hide in print|
[[Image:HY8image CrossingData.jpg|thumb|none|600 px|Example of the ''Culvert/Crossing Data'' window.]]
==''Related Topics''==


'''[[WMS:HY-8|HY-8 Main Page]]'''


===Introduction===
{{HY8Main}}
* [[WMS:HY-8|Introduction]]
[[Category:HY-8 General Information|C]]
* [[WMS:HY-8 Getting Started|HY-8 Getting Started]]
[[Category:Crossing Data|C]]
* [[WMS:HY-8 Differences from DOS HY-8|Differences from DOS HY-8]]
[[Category:Culvert Data|C]]
* [[WMS:HY-8 Limitations|Limitations]]
[[Category:HY-8 Dialogs|Culvert]]
====Building a Project====
:* [[WMS:HY-8 Building a Project|Building a Project]]
:* [[WMS:HY-8 Locate Project|Locate Project]]
:* [[WMS:HY-8 Culvert Crossing Data|Culvert Crossing Data]]
:* [[WMS:HY-8 Run Analysis|Run Analysis]]
:* [[WMS:HY-8 Report Generation|Report Generation]]
}}

Latest revision as of 14:23, 17 October 2016

Input Crossing and Culvert data

The user may choose up to 99 barrels for each culvert that is defined by the same site conditions, shape configuration, culvert type, and "n", and/or up to 6 independent culverts. In both cases the culverts share the same headwater pool, tailwater pool or channel, and roadway characteristics. The input properties define the crossing and culvert. The data defining each culvert are entered in the input parameters widow. This window is accessed from the File menu, or by selecting Culvert Crossing Data from the Project Explorer culvert or crossing HY-8 CircularCrossingFolderIcon.png right-click menu, or selecting the Culvert Crossing Data CulverCrossingDataIcon.png icon from the toolbar. From the Culvert Crossing Data window, the site, culvert, tailwater, discharge, and roadway data are all entered.


Right-click culvert or crossing menu in the HY-8 Project Explorer.

Culvert Crossing Data Window

All of the parameters necessary to define crossing and culvert information can be defined from the Culvert/Crossing Data window as shown below.

Example of the Culvert/Crossing Data window.