HY8:LOWFLOW Method: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 17: Line 17:
{{HY8Main}}
{{HY8Main}}


[[Category:AOP|A]]
[[Category:AOP|L]]
[[Category:LOWFLOW]]
[[Category:LOWFLOW|L]]
[[Category:External Links]]
[[Category:External Links]]

Revision as of 14:33, 28 April 2015

Low Flow Hydraulics Method

The HY-8 Low Flow Hydraulics method is based on the TFHRC report: Fish Passage in Large Culverts With Low Flow. The method divides half of the culvert span into slices. The velocity and depth of that slice are computed, then compared to a threshold. If the slice has a velocity lower than the threshold and a depth greater than the threshold, the slice is determined to pass the requirements. For more information on this method, please see the TFHRC report listed above.

CulvertCrossSectionSlices.jpg

The Low Flow Hydraulics calculator may be used any time that there is a requirement on depth or velocity through a culvert. This method is commonly used to determine fish passage where the threshold depth and velocity relate to the swimming ability of a targeted fish.