Lighting Options

From XMS Wiki
Revision as of 20:50, 29 March 2011 by Cdickson (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The lighting options are accessed by clicking on the Lighting Options item or tab in the Display Options dialog. The default options vary between applications, and the options may be changed, saved, and restored within the project.

Lighting dialog.

The following table describes the lighting display options.

Display Option Description
Enable lights This check box controls whether light sources are used in the lighting process for generating lighted images. These light sources control the intensity of the colors on the lighted image and highlight the relief or geometrical variation in the surface of the objects being lighted.
Lighting list box This list contains preset lighting schemes and highlights the scheme currently displayed.
Renaming a scheme Double click on a scheme to begin editing its name.
Deleting a scheme Right click on a scheme and select Delete. The final scheme cannot be deleted.
Creating a scheme Right click on a scheme and select duplicate.
Plan view preview This preview shows the current light scheme on a sphere in plan view, i.e. looking along the z-axis. Click or drag within the preview to direct both the diffuse and the specular components of the light currently selected in the light table. The selected light direction is shown by a dot on the sphere. A direction from in front of the sphere is shown by a green dot, and from in back by a red dot.
Smooth edges Check this box to smooth all diffuse and specular lights of this scheme so that the surface does not appear faceted.
Shiny Increase this value to sharpen all specular highlights of this scheme. At 100% this value turns off the specular highlight since it assumes that all specular lights are points whose reflection shrinks to a imperceptible point at maximum shinyness. At 0% this value assumes that the full intensity of the light is reflected in all directions (decrease the specular values proportionally to get a realistic effect of less and less light reflecting to the eye from each surface).
Ambient slider Shows the Ambient value of the light currently selected in the table, and can change the value. The ambient value is light from all directions which lights each and all surfaces uniformly leaving no surface unlighted. It is most useful on surfaces facing away from directional light such as diffuse and specular light.
Diffuse slider Shows the Diffuse value of the light currently selected in the table, and can change the value. The diffuse value is for a point light which brightens surfaces in all directions the more they face the that light, and which leaves surfaces in darkness that face away from the light.
Specular slider Shows the Specular value of the light currently selected in the table, and can change the value. The specular value is a point light which brightens surfaces if they reflect like a mirror from the direction of the light to the direction of the viewer, and which leaves surfaces in darkness that do not have this angle of reflection.
Light table Displays the enable, xyz position, Ambient, Diffuse, and Specular values for each of 8 lights in the current scheme, and highlights the currently selected light. Any of these values may be modified by clicking them and editing their value.
Enable column Check these boxes to turn on each light.
X, Y, and Z columns Edit these values or click/drag in the plan view preview sphere to change the direction of the light. These values are will be normalized to a unit direction vector.
Ambient, Diffuse, and Specular columns Edit these values or drag their corresponding slider.