SMS:ADCIRC Boundary Conditions: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
(38 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Much of ADCIRC's versatility as a model is due to the large number of different boundary types and boundary conditions available in the model.
#redirect [[SMS:ADCIRC_Coverages#Boundary_Condition]]
 
== ADCIRC Boundary Types ==
Boundary types are assigned to feature arcs in the conceptual mode or nodestrings on the ADCIRC mesh. Correct boundary type assignments are very important to run a successful ADCIRC project. The following boundary types are available in SMS for ADCIRC:
* '''Unassigned''' – default, no boundary condition assigned
* '''Mainland''' – land or coastline boundary
* '''Island''' – this can be selected for a closed feature arc
* '''Normal Flow''' – assigned across the nodes of the mesh, therefore the parameters of this boundary type can only be modified after a mesh has been created and the mesh module is currently selected
* '''Normal Wave Radiation'''
* '''Mainland Barrier'''
* '''Island Barrier''' – requires 2 nodestrings
* '''Weir''' – requires 2 nodestrings with the same number of nodes
* '''Zero Normal Velocity Gradient'''
* '''Ocean'''
 
== ADCIRC Boundary Conditions ==
Depending upon the specified boundary type, the following boundary conditions are available:
 
{|border="1"
|+
!width="150"| Boundary Condition
!width="150"| Boundary Type
|- align="center"
| Essential w/<br>Tangential Slip || Mainland<br>Island<br>Normal Flow<br>Mainland Barrier
|- align="center"
| Essential w/o<br>Tangential Slip || Mainland<br>Island<br>Normal Flow<br>Mainland Barrier
|- align="center"
| Natural (w/<br>Tangential Slip) || Mainland<br>Island<br>Normal Flow<br>Mainland Barrier
|- align="center"
| [[SMS:ADCIRC Model Control#Tidal/Harmonics Tab|Tidal Constituents]] || Ocean
|- align="center"
| Curve || Ocean
|- align="center"
| Extract from Dataset|| Ocean
|}
 
== Nodal Boundary Conditions (Recording Stations) ==
The following boundary conditions can be assigned to an ADCIRC mesh node:
===2D Station Types===
* Elevation
* Velocity
* Concentration
* Meteorological
===3D Staion Types===
* Density/Temperature/Salinity
* Velocity
* Turbulence
===Description of Station===
Stations can be assigned a name to make station identification easier.
 
 
==Related Links==
* [[SMS:ADCIRC|ADCIRC]]
* [[SMS:ADCIRC Coverage|Coverage]]
* [[SMS:LTEA|Linear Truncation Error Analysis (LTEA)]]
* [[SMS:ADCIRC Mesh|Meshes]]
* [[SMS:ADCIRC Model Control|Model Control]]
* [[SMS:ADCIRC Spatial Attributes|Spatial Attributes]]
* [[SMS:Steering|Steering]]
 
{{Template:SMSMain}}
 
[[Category:ADCIRC|B]]

Latest revision as of 19:36, 20 November 2018