SMS:BOUSS-2D Parameter File: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
Line 174: Line 174:
[[Category:SMS File Formats|B]]
[[Category:SMS File Formats|B]]
[[Category:BOUSS-2D|Parameter]]
[[Category:BOUSS-2D|Parameter]]
[[Category:Parameters|BOUSS-2D]]

Latest revision as of 17:06, 14 December 2016

The BOUSS-2D parameter file contains a series of comments and keywords that define the components and control the options of a simulation. Any line that begins withs "#" symbol is a comment and is ignored by the model. However, some utilities exist that may utilize comments.

Keywords begin with a ":" and are followed by values associated with the keyword.

The parameter file format is shown in Figure 1.


#
###############################################################
# BOUSS-2D Run Parameter File: cirp_ideal.par
# Written by: SMS
# Creation Date: Tuesday June 22 16:49 2004
###############################################################

File Header


#
# Bathymetric Grid Parameters
#
:BATHY_FILE filename.grd
:TIDAL_OFFSET offset value

Definition of grid and tidal offset


#
# Damping Parameters
:DAMPING_FILE filename.grd

Keywords for damping or porosity spatial input data */


#
# Wavemaker #1 parameters
#
:START_WAVEMAKER
: WM_POS_I1 value (column number)
: WM_POS_J1 value (row number)
: WM_POS_I2 value (column number)
: WM_POS_J2 value (row number)
: WAVE_TYPE value (Regular/Irreg_Uni/Irreg_Multi)
: WAVE_HEIGHT value (meters)
: WAVE_PERIOD value (seconds)
: WAVE_DIRECTION value (degrees from North)
: WAVE_CYCLES value (integer)
:END_WAVEMAKER


The Wave maker definition.
The position values must correspond to a single row or column.
The values required depend on the wave type and method of defining that wave. The values shown illustrate a regular wave.


#
# Simulation parameters
#
:DURATION value (seconds)
:TIME_STEP value (seconds)
:CHEZY_COEFF value (unitless default = 50)
:SMAGORINSKY_CONST value (unitless default = 0.2)
:NONLINEAR_OPTION value (Strong/Weak)
:CHECK_WAVE_BREAKING value (Yes/No default - Yes)
:TURB_LENGTH_SCALE value (meters0
:CALC_WAVE_RUNUP value (Yes/No default - No)

General model parameters


#
# Output Parameters
#
:OUTPUT_FILE_PREFIX file prefix
#
# Output File for Significant Wave Height
#
:HS_FILE file prefix_hs.grd
#
# Output File for Mean Currents
#
:MEAN_UV_FILE file prefix_mean_uv.grd
#
# Output File for Mean Wave Direction
#
:THETA_FILE file prefix_theta.grd

Single Timestep (Steady State) spatially varied output options


#
# Surface Elevation Animation File Output Options
#
:SAVE_ETA_ANIMATION
: ETA_ANIM_FILE file prefix.eta
: START_TIME value (seconds)
: END_TIME value (seconds)
: SAVE_TIME_STEP value (seconds)
: SAVE_FULL_GRID value (Yes/No default = Yes)
:END_SAVE_ETA_ANIMATION
#
# Velocity Animation File Output Options
#
:SAVE_UV_ANIMATION
: UV_ANIM_FILE file prefix.uv
: START_TIME value (seconds)
: END_TIME value (seconds)
: SAVE_TIME_STEP value (seconds)
: SAVE_FULL_GRID value (Yes/No default = Yes)
:END_SAVE_UV_ANIMATION

Multiple Timestep (transient animations) spatially varied output options


#
# Time Series Output File Names
#
:TS_ETA_FILE file prefix_ts_eta.ts1
:TS_U_FILE file prefix_ts_u.ts1
:TS_V_FILE file prefix_ts_v.ts1
:TS_PRESSURE_FILE file prefix_ts_pressure.ts1
:TS_Q_FILE file prefix_ts_q.ts1
:TS_RUNUP_FILE file prefix_ts_runup.ts1

Header for time series output options - must be included to create TS1 files


#
# Time Series Output Options
#
:SAVE_TIMESERIES value (id)
: SAVE_TS_ETA value (Yes/No)
: SAVE_TS_UV value (Yes/No)
: SAVE_TS_PRESSURE value (Yes/No)
: SAVE_TS_Q value (Yes/No)
: TS_X value (meters)
: TS_Y value (meters)
: TS_Z_UV value (meters above bed)
:END_SAVE_TIMESERIES
#

Time Series specification block. Repeated as many times as needed.


#
# Time Series Runup Output Options
#
:SAVE_RUNUP value (id)
: TS_X value (meters)
:END_SAVE_RUNUP
#

Runup Series specification block. Repeated as many times as needed. Currently only supported for 1D mode


#
# Output File for XMDF Solution File
#
:SOLUTION_FILE_OPTION value (0 - BOUSS-2D Native, 1 - XMDF, 2 - Both)
:XMDF_SOLUTION_FILE file prefix_sol.h5

Output format selection

Figure 1. BOUSS2D Parameter File Format.


Related Topics