SMS:Release Notes SMS: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 6: Line 6:
'''Coverage'''
'''Coverage'''
*11771 Warning appears when attempting to merge coverages
*11771 Warning appears when attempting to merge coverages
*11786 Error duplicating material coverage
*11786 Error duplicating material coverage. A warning message comes up saying "invalid map<K, T> key. On clicking OK the geometry in the coverage is duplicated to a new SRH Material coverage, but the material list an polygon attributes are gone.
*11704 Dataset not acknowledged by Observation coverage. The Observation coverage is not recognizing all datasets in the scatter module and gives an error: "Error. No dataset specified for interpolation".
*11704 Dataset not acknowledged by Observation coverage. The Observation coverage is not recognizing all datasets in the scatter module and gives an error: "Error. No dataset specified for interpolation".
'''Delete'''
'''Delete'''

Revision as of 15:53, 9 May 2019


The SMS Intermediate Release Bugfixes page for released versions of SMS:

SMS 13.0 Release Bugfixes

SMS 13.0.8 - May 02, 2019

Coverage

  • 11771 Warning appears when attempting to merge coverages
  • 11786 Error duplicating material coverage. A warning message comes up saying "invalid map<K, T> key. On clicking OK the geometry in the coverage is duplicated to a new SRH Material coverage, but the material list an polygon attributes are gone.
  • 11704 Dataset not acknowledged by Observation coverage. The Observation coverage is not recognizing all datasets in the scatter module and gives an error: "Error. No dataset specified for interpolation".

Delete

  • 11781 Unlink coverage command is labeled as delete.

Display Options

  • 11775 Selecting a polygon doesn't work when using the Select Polygon tool.
  • 11776 Dragging to zoom doesn't work. Instead was acting like the Rotate tool.

DMI

  • 11517 DMI: double-field does not work. Causes issues when entering numeric values when using the German language setting.

Export

  • 11753 Symmetric storm (for.22) not written correctly (or at all) when exporting an ADCIRC simulation.

Online Maps

  • 11794 Add online maps doesn't load an image, nor does it download the requested data.

SMS 13.0.7 - April 16, 2019

ADCIRC

  • 11357 Copy protection broken for PADCIRC. States that a license is needed when increasing the number of computational processors being used above 1.

CMS Flow

  • 11607 CMS-Flow solution folder named incorrectly (not matching the simulation name) and doesn’t include the WSE solution.

Contours

  • 11614 Graphics Window doesn't update after deleting ADCIRC solution from project.

Coverage

  • 11705 Opening fort.14 file issue 1. The BC locations were getting lost when opening a fort.14 file.

Datasets

  • 11716 Gradient, Gradient Angle, and Directional Derivative dataset tool should operate on all time steps of the selected dataset.

Export

  • 11751 ADCIRC script fails (gives errors) if a source file is already in the right place. Happens when making a change to the simulation and then exporting.
  • 11687 HEC-RAS 2D export encounters issues when there is a void in the mesh. A warning has now been added if a void is detected in the mesh when exporting to HEC-RAS.

Legend

  • 09481 Incorrect Zonal Classification Output where the tool did not correctly identify all selected values. Unable to consistently reproduce the issue.

Project Explorer

  • 11747 Importing ADCIRC project from SMS 12.3 issues. When bringing in an ADCIRC project built in SMS 12.3 or earlier, SMS 13.0 would incorrect open the project with extra meshes and coverages.
  • 11710 Copying a DMI coverage is too slow. When using the Duplicate command, could take several minutes to copy a coverage.
  • 11692 Collapse All in Project Explorer hides all tree items except "Project". Should be able to see Map Data, GIS Data and other folders.
  • 11660 No "Link" Menu Option on SRH-2D Map coverages when trying to link to a simulation.

Projection

  • 11726 Errors getting NLCD data when EPSG code is not available.
  • 11714 “NAD 1983 HARN StatePlane Montana FIPS 2500 (US Feet)” Projection Missing from new projection dialog.

Scatter Data

  • 11695 Converting raster to scatter results in unexpected behavior where the points and triangles cannot be selected.
  • 11676 Feature stamp with interpolated cross sections results with bad center line elevations.

SRH-2D

  • 11721 Using the Properties right-click menu command on some DMI (SRH, ADCRIC, etc.) coverages causes SMS to crash.

SMS 13.0.6 - March 20, 2019

ADCIRC

  • 11622 SMS not reading ADCIRC max files correctly. Was giving unreasonable maximum elevation and velocity values that did not match the maxele.63 and maxvel.63 files.

CMS Flow

  • 11606 CMS-Flow model checker checks for sediment datasets when sediment transport is turned off.
  • 11603 CMS-Flow wind dataset disrupts load solution. When running the CMS-Flow model, it runs successfully but then gives the error "File not found: 'model4_wind.h5'" When attempting to load the solution. None of the solution files then load. In the model files folder, loading in the individual h5 files loads in the results. The wind magnitude and velocity datasets are loaded from 'model4_met.h5'.

Contours

  • 11616 Mesh Contour Intervals overlap in exported shapefile. When exporting mesh contours to a shapefile, the min/max do not always fall inside of the designated contour interval.

Legend

  • 11612 Coverage legend display shows both default and specific display outcomes instead of only the specific outcome as selected.

Opening File

  • 11650 Cannot open ADCIRC .grd file.

Popup Menu

  • 11675 Project Explorer right-click menu is cut off by the top of the screen when SMS is maximized.

Project Explorer

  • 11660 No "Link" Menu Option on Map Data Item. After unlinking coverages from an SRH-2D simulation, the right-click "Link" menu command for coverages was missing when attempting to link new coverages to the simulation.

SMS 13.0.5 - February 20, 2019

Polygons

  • 11577 The selected polygon does not get highlighted correctly when selecting a channel polygon. The interior polygons (bendway weirs) are highlighted rather than the channel polygon.

SMS 13.0.4 - February 5, 2019

Scatter Data

  • 11573 Converting map coverage to a scatter set causes SMS to crash.
  • 11475 FFP Scatter set loses data values after being saved. When re-opening the scatter set, all elevation values are 0.

SMS 13.0.3 - January 25, 2019

Display Options

  • 11451 Change All command for "Arc BC" display options not useful.

Opening File

  • 11445 Large LANDXML file either not opening or taking a long time to open.

Projection

  • 11480 Extra projections being added to the recent projections list in the Projections dialog.

SMS 13.0.2 - January 22, 2019

2D Grid

  • 11427 2D Mesh elevations from boundary of patch not using the Coon's Patch as designed

Contours

  • 11505 Need consensus on positive/negative depth convention

Display Options

  • 11474 Map flood fails if scatter contour options not linear

DMI

  • 11466 In the Run Queue, the simulation associated with a set of plots is not clear - add simulation name label to plot
  • 11486 DMI - Database error when combobox option has apostrophes in it
  • 11469 Crash when trying to select dataset with DMI dataset selector

Help

  • 11526 Hide Help-Button when help_button_url is unset

Import

  • 11497 Opening dat file attempts to open as an image (GM)
  • 11471 13.0 - Project import causes crash
  • 11472 13.0 - SRHHYDRO import crashes SMS

Interpolation

  • 11450 Interpolate command causes confusion and loss of functionality

Preferences

  • 11487 GUI Test: Popup does not appear when attempting an invalid Quadtree cell merge

Scatter Data

  • 11190 Convert Map -> Scatter does not work if node or vertex is selected but not used

SRH-2D

  • 11473 Nodes on the wet/dry edge not getting negative depth as expected
  • 11495 Launching SRH-2D simulation unloads datasets from another projection
  • 11314 SRH-2D unable to run Sediment Transport
  • 11502 SRH Wall BC requires extra roughness height even when turned off
  • 11495 Launching SRH-2D simulation unloads datasets from another projection
  • 11467 Double quote character {"} in SRH-2D case name causes SRH-Post script to fail
  • 11492 GUI Test: Error when running multiple SRH2D simulations

STWAVE

  • 11513 OBSE results in STWAVE not projected correctly
  • 11198 Import of STWAVE solution reads vector dataset incorrectly

TUFLOW

  • 11496 SMS crash when attempting to open TUFLOW node attributes

SMS 13.0.1 - November 20, 2018

ADCIRC

  • 11353 User cannot view the Command Line output in the Simulation Run Queue
  • 11313 Crash when mapping to 2D mesh using Raster bathymetry in coastal training exercise

CAD

  • 11401 CAD data does not get recognized as having a range

Datasets

  • 11293 Reference time changed when performing dataset calculator operation on Quadtree dataset

Display Options

  • 11408 Projection overlay issues
  • 11333 There is no polygon fill option in the display options for Constant Paving Density

DMI

  • 11406 Run Queue plot colors should be more contrasting

Feature Object

  • 11399 Polygons selection using a map polygon not quite right

General

  • 11367 SRH Interface Slow to Respond

Interpolation

  • 11291 Interpolate to 2D Cartesian Grid

Materials

  • 11368 Corrupt Materials Table when deleting rows

Mesh

  • 11417 Converting selected mesh nodes to a scatter set produces an empty scatter set
  • 11383 Progress report for mesh generation goes above 100%
  • 11386 Setting the contour range uses inactive values. It should not.

Opening File

  • 11371 Processing Conversion of SRH Project from 12.x to 13.x

Plots

  • 11405 Observation profile plot does not update timesteps when "active" selected and user changes time step selection

Polygons

  • 11363 Mesh Preview button causes SMS to hang

Project Explorer

  • 11374 Right-click in project explorer causes SMS crash
  • 11382 Right click menu when scalar and vector selected is missing

Save

  • 11398 Mesh that is not displayed when saving a project is displayed when read in

SRH-2D

  • 11395 Error Exporting SRH Simulation
  • 11381 User can edit text in the Model Checker
  • 11364 Flow trace option in Floodway tool not accessible

TUFLOW

  • 11318 text is unset

SMS 13.0.0 - October 15, 2018

SMS 12.3 Release Bugfixes

SMS 12.3.4 - August 8, 2018

CMS Flow

  • 11096 Crash Opening Project
  • 10886 CGWAVE Reset 1D spacing command causes crash

Coverage

  • 11056 SMS Crashes Deleting Monitor Points
  • 11064 GUI Test: TUFLOW 2D materials not being renamed
  • 10934 Clicking Help Button in Create Coverages Dialog Does Nothing
  • 10924 Create coverages Dialog for New CSHORE Simulation isn't Modal

Datasets

  • 11001 Using Scatter Transform Tool Applies Transform to All Datasets and Not Just the Active Dataset
  • 10843 Crash Deleting Datasets

Display Options

  • 10837 SMS Hangs with Specific Vector Display Options

Feature Object

  • 11143 SMS switched module from Map to Mesh after dragging a vertex

GIS

  • 10810 SMS Crashes Opening (*).sdf File

HY-8

  • 10549 Project stuck in Build Culvert Tables

Map

  • 10770 Source Arc Resdisribution Challenge
  • 10732 Two arcs get linked to same attributes

Materials

  • 11085 Dialogs pop in front of SMS when closing the material dialog

Mesh

  • 10896 Read script crashes SMS after a linked geometry is deleted from the project tree

Opening File

  • 10867 Crash Opening project
  • 10864 Crash opening project

Plots

  • 10817 Plot file added to list of recent files but can't be read in

Project Explorer

  • 11050 Computed Values Don't Update Until Datasets Moved to a Folder

Save

  • 11116 Generic Model Definition Not Saving Curve Data In SMS

Scatter Data

  • 10968 Importing LandXML Files Build Corrupt Scatter Sets
  • 10780 Crash deleting points in duplicated scatter set

SRH-2D

  • 11107 PostSRH-2D does not run, might be missing a dependency
  • 10982 HY8 File with No .hy8 Extension Causes Invalid Path to Table File
  • XMDFC output option no longer supported. So use projects that previously used the XMDFC output option:
    1. Go into the model control and change the output option to something that is not "XMDF".
    2. Click OK on the dialog to exit out.
    3. Re-open the model control and set the output option to "XMDF" and click OK.

SMS 12.3.3 - May 30, 2018

General

  • 010484 Multiple issues with FESWMS structures
  • 010732 Two arcs get linked to same attributes
  • 010816 Crash converting shape to map
  • 010473 ADH project saved from SMS does not run
  • 009794 Polygon material assignment not clear

GIS

  • 010810 SMS Crashes Opening (*).sdf File
  • 010614 Can't drag online images to change order of display in Project Explorer

SRH-2D

  • 010506 False SRH Model Checker message for International Feet
  • 010507 SRH Geometry Units not written for Intl Feet
  • 010557 SRH-Pre failure in 12.3 but works in 12.2
  • 010685 Spaces Preceding SRH-2D Dataset Names

SMS 12.3.2 - May 8, 2018

ADCIRC

  • 010644 SMS write the IHOT value incorrectly
  • 010646 SMS gives a warning on ADCIRC run that appears to be wrong (the file looks okay)
  • 010643 The ADCIRC "Run ID" is not saved correctly

General

  • 010551 Hydrotec Related Feedback - Create and Move Point Lag
  • 010572 Import of native SRH files does not read time series BC data
  • 010547 BC Arc Options shows all possible options
  • 010656 Crash After Deleting All Coverages
  • 010676 Geometric surface of mesh disappears for some view directions
  • 010484 Multiple issues with FESWMS structures
  • 010663 Crash assigning Island weir to arcs
  • 010689 When opening an image (GIS Object) the file is not added to the recent list. It should be
  • 010605 HY-8 Build Tables Executable Filepath not Specified for New Installs of 12.3
  • 010553 Scalar Paving Values not Saved with the Project

Dynamic Model

  • 010601 Sample Dynamic XML cause crash on start-up

Mesh

  • 010612 Add Arcs To Mesh Destroys Mesh
  • 010552 Crash after extrapolation value warning

Model Control

  • 010494 Widget Confusion in SRH Output Control

Online Maps

  • 010614 Can't drag online images to change order of display in Project Explorer

Scatter Data

  • 010576 Import of XML preserves triangulation but not boundary

SRH-2D

  • 010506 False SRH Model Checker message for International Feet
  • 010507 SRH Geometry Units not written for Intl Feet
  • 010557 SRH-Pre failure in 12.3 but works in 12.2
  • 010685 Spaces Preceding SRH-2D Dataset Names
  • 009944 SRH-2D pre-processor crashes.
  • 010703 SRH-2D Requires Initial Conditions WSE Value in SI Units
  • 010232 SRH-2D Sediment Discharge Type Rating Curve not Working

SMS 12.3.1 - March 21, 2018

ADCIRC

  • 10380 ADCIRC parameters lost when saving project with multiple meshes, relaunching SMS and opening project

Export

  • 10342 SMS Writes Scatter ASCII Dataset Files Incorrectly

Materials

  • 10490 Crash Assigning Materials

Mesh

  • 09413 Saving Mesh Contours as Shapefiles: Incorrect Polygon Attributes

Plots

  • 10461 Crash in Plot Wizard

Quadtree

  • 10460 Scalar dataset in quadtree not editable when selecting cells while Z dataset is active

Save

  • 10483 FESWMS Ceiling Dataset Duplicated

SRH-2D

  • 10476 Unable to run SRH with duplicate coverage names

TUFLOW

  • 10259 Tuflow Multiple 2D Domains Not Exporting Correctly

WAM

  • 10369 SMS Not Reading WAM Spectra Files
  • 10364 WAM Spectra_User format Incorrect

SMS 12.3.0 - February 24, 2018

SMS 12.2 Release Bugfixes

SMS 12.2.14 - May 8, 2018

ADCIRC

  • 010644 SMS write the IHOT value incorrectly
  • 010646 SMS gives a warning on ADCIRC run that appears to be wrong (the file looks okay)
  • 010643 The ADCIRC "Run ID" is not saved correctly
  • 010380 ADCIRC parameters lost when saving project with multiple meshes, relaunching SMS and opening project

General

  • 010551 Hydrotec Related Feedback - Create and Move Point Lag
  • 010572 Import of native SRH files does not read time series BC data
  • 010547 BC Arc Options shows all possible options
  • 010656 Crash After Deleting All Coverages
  • 010663 Crash assigning Island weir to arcs
  • 010490 Crash Assigning Materials
  • 010689 When opening an image (GIS Object) the file is not added to the recent list. It should be
  • 010461 Crash in Plot Wizard
  • 010553 Scalar Paving Values not Saved with the Project
  • 010483 FESWMS Ceiling Dataset Duplicated

Display Options

  • 010676 Geometric surface of mesh disappears for some view directions

DMI

  • 010601 Sample Dynamic XML cause crash on start-up

Mesh

  • 010612 Add Arcs To Mesh Destroys Mesh
  • 010552 Crash after extrapolation value warning

Model Control

  • 010494 Widget Confusion in SRH Output Control

Quadtree

  • 010460 Scalar dataset in quadtree not editable when selecting cells while Z dataset is active

Scatter Data

  • 010576 Import of XML preserves triangulation but not boundary

SRH-2D

  • 010488 Merging SRH-2D BC coverages causes arc numbering error
  • 009944 SRH-2D pre-processor crashes.
  • 010476 Unable to run SRH with duplicate coverage names

TUFLOW

  • 010259 Tuflow Multiple 2D Domains Not Exporting Correctly

WAM

  • 010369 SMS Not Reading WAM Spectra Files
  • 010364 WAM Spectra_User format Incorrect

SMS 12.2.13 - March 21, 2018

ADCIRC

  • 10380 ADCIRC parameters lost when saving project with multiple meshes, relaunching SMS and opening project

CMS Flow

  • 10075 Velocity checkbox in CMS-Flow BC coverage arc attributes dialog doesn’t allow user to specify velocity dataset

Contours

  • 10312 TUTORIAL REVIEW: CMS-Wave contour display legend issue
  • 10212 Select with Polygon delete dataset contour options

Display Options

  • 10106 Vector colors not correct

Export

  • 10342 SMS Writes Scatter ASCII Dataset Files Incorrectly
  • 09976 CMS-Flow Salinity Statistical output times incorrect

Feature Object

  • 10221 TUTORIAL REVIEW:Redistribute Arc using a truncated size function removes all vertices

Interpolation

  • 09991 Multiple issues with editing storm track

Materials

  • 10490 Crash Assigning Materials

Mesh

  • 09413 Saving Mesh Contours as Shapefiles: Incorrect Polygon Attributes

Opening File

  • 10309 Crash opening CMS File

Plots

  • 10461 Crash in Plot Wizard
  • 10288 TUTORIAL REVIEW: BOUSS-2D ETA probe plots are not popped out like other plots

Projection

  • 10393 Projections of TINs gets confused in 12.2, 12.3 and 13.0
  • 10239 Incorrect unit label exported to SRH-2D
  • 09693 Reproject is slower in SMS 12.2 than in previous versions of SMS.

Quadtree

  • 10460 Scalar dataset in quadtree not editable when selecting cells while Z dataset is active
  • 10258 Conversion from CMS-Flow domain to scatterset is no longer supported

Save

  • 10483 FESWMS Ceiling Dataset Duplicated
  • 10108 Opening old FESWMS project and resave results in invalid project

Scatter Data

  • 10333 Editing scalar value wipes out timesteps

Simulation

  • 10299 Incorrect Precision Exported for WAM Nested Grid and Spectral Site Location Coordinates

SRH-2D

  • 10476 Unable to run SRH with duplicate coverage names

TOPAZ

  • 09882 GUI Test: TOPAZ runs with an error when the folder path is too long

SMS 12.2.12 - December 20, 2017

Annotation

  • 10083 Annotations have gray shading with lighting turned on

CAD

  • 10058 CAD Data Not Being Displayed After Being Generated

CMS Flow

  • 10130 Can’t delete multiple rows in spatially constant wind CMS-Flow table

Contours

  • 10132 Contour Labels Partially Obscured

Datasets

  • 10078 Smoothing a dataset on a scatter set gives wrong answer

Display Options

  • 10082 Dragging of Feature Nodes Not Shown

Feature Object

  • 10124 Bad arc resulting from redistributing based on source arc
  • 10107 Clean coverage hangs or gives wrong results when attempting to "extend" an arc to intersect

General

  • 10158 Align Arc with Contour Tool Not Functional
  • 10102 Select connecting arc function not working
  • 09998 Selected nodestring during saving causes renumbering

HEC-HMS

  • 09922 WMS Crashes Exporting HMS with Diversions from Basin

Import

  • 10067 Can't import XML file

Mesh

  • 10186 Crash generating AdH Mesh
  • 10063 Duplicate Node Tolerance Incorrect

Plots

  • 10151 Incorrect Plot for BC Populate
  • 10105 Time series plot range is not saved

Preferences

  • 09858 Location of HY8 Executable in Preferences cannot be Changed

Scatter Data

  • 10136 Incorrect Pt Names saved to *.h5 file for scatter set

SRH-2D

  • 09946 SRH BC Populate Tool doesn't work properly unless vertices redistributed

Summary Table

  • 10093 Summary Table Flows Incorrect

SMS 12.2.11 - October 24, 2017

General

  • 09998 Selected nodestring during saving causes renumbering
  • 10067 Can't import XML file
  • 09979 Map Legend is using Global Lighting making it hard to read.
  • 09984 Numerical Precision not clear in GMI
  • 09825 Depth Varying Roughness XY series only displays metric units
  • 09695 Status Window Message Gives Wrong Impression of What Is Actually Happening

Plots

  • 09960 TUFLOW Cross Section Plot not functioning correctly
  • 10028 Plots in 12.2 are much slower than previous versions

Map

  • 09983 Crashing when editing BC value

Datasets

  • 09737 Compare datasets tool does not assign correct values in non-overlap region

Contours

  • 09921 Linear contours not exported to CAD when using dataset contour options
  • 09803 Mesh Contours to CAD Issue

Snapping

  • 10053 Bad Snapping

SRH-2D

  • 09824 Multi-Select and Add to SRH Simulation Issue

SMS 12.2.10 - September 26, 2017

General

  • 09927 SRH “Assign Material Properties” dialog opens when double-clicking outside of any polygon
  • 09999 Minor spelling issue with feature stamping
  • 09965 SMS Incorrectly loading fort.22 wind file
  • 09975 .dat file export does not contain data
  • 09945 The river module commands cause SMS to crash.
  • 09917 Typo in the Redistribute Vertices dialog
  • 09972 GUI Test: Error updating widget value
  • 09926 Project metadata remains after selecting “File | Delete All”
  • 09852 Can't open file with umlaut in name

Datasets

  • 09933 Dataset contour options not defaulting correctly for datasets in a folder
  • 09958 Can’t edit quadtree grid scalar dataset interpolated from scatter

Materials

  • 09959 SMS appears to hang when accessing material properties
  • 09898 Materials numbering error

Mesh

  • 09903 Summary Table give bad values with RMA2 mesh

SRH2D

  • 09906 Modifying Polygons in SRH-2D Materials Coverage causes Other Polygons to Lose Polygon Attributes
  • 09947 SRH Interface doesn't understand comma input

TUFLOW

  • 09993 TUFLOW Form Loss Coefficients

SMS 12.2.9 - August 16, 2017

BOUSS2D

  • 09811 Crash when loading project or when attempting to modify model control of Bouss-2D Simulation without grid
  • 09623 Update for the min recommended depth for BOUSS2D

Coverage

  • 09733 Summary table gives results for only one cross section coverage
  • 09732 Must select centerline coverage for each cross section when generating a summary table

General

  • 09503 Smoothing dataset in scatter has no effect
  • 09830 CMS-Flow Bed Layer Section of Card File Exported Incorrectly
  • 09718 CSDB not being saved with the project
  • 09676 Dataset Toolbox Grid Spacing Tool very slow
  • 09755 Selecting radio buttons in the Extract Cross Sections window turns off radio buttons in other sections
  • 09785 Incorrect Unit Label in "Populate" WSE Tool
  • 09771 Summary Table spreadsheet too big
  • 09729 Feature Stamping doesn't properly trim/intersect surface

Map

  • 09724 CAD to Map Snapping Options Ignored
  • 09780 Crash opening map file

Plots

  • 09719 Plot settings get reset when they shouldn't
  • 09774 Incorrect Errors Reported in Error Plots

Quadtree

  • 09766 Converting Quadtree to Ugrid changes the cell centered datasets to pt centered 06-19-2017
  • 09763 SMS 12.2 missing ability to compute volume on a Quadtree 06-14-2017

Scatter Data

  • 09629 Map->Scatter Not using arc elevations as specified

Summary Table

  • 09819 Generating Summary Table with Mesh Toggled Off Generates Unreliable Results
  • 09818 Summary Table Flows
  • 09734 Specified Datasets not used in Summary Table
  • 09720 Summary Table not working as it should
  • 09734 Specified Datasets not used in Summary Table

SMS 12.2.8 - June 20, 2017

Display Options

  • 09655 Display appears to be missing some curved arrows

Feature Objects

  • 09634 SRH-2D Boundary condition gets corrupted
  • 09632 Can't merge CGrid Rows or Columns

General

  • 09742 GUI Test: Crash when redistributing vertices after doing a Delete All
  • 09730 Changing Temp Directory can create multiple file browser dialogs
  • 09678 Can't change temp directory
  • 09567 SMS hangs creating water level arcs for TUFLOW coverage
  • 09633 Dimming of widgets in Feature Stamping Dialog
  • 09363 Minor PTM error message when saving project
  • 09717 Line properties from HEC-RAS not read into SMS

Mesh

  • 09663 Crash Merging Meshes

Plots

  • 09653 ARR Plot takes too long to come up and is too sensitive

Projection

  • 09654 Converting mesh boundary to "unprojected" coverage gives wrong result

Scatter Data

  • 09625 The Scatter Contour to Feature arc dialog can become too small
  • 09566 SMS hangs merging scatter sets

SRH-2D

  • 09681 Incorrect formatting for Supercritical BC for SRH
  • 09616 SRH-Pre Cannot read Sediment Gradation XYS files that Have a Space in the Name

SMS 12.2.7 - April 11, 2017

ADCIRC

  • 09425 SMS Freezes in Spacial Attributes Dialog

CMCARDS

  • 09571 Crash opening cmcards file

DMI

  • 09461 DMI control_set not functioning as expected
  • 09551 The DMI puts a lock on the executable and doesn't release it
  • 09330 Polygon attributes in DMI coverages not being saved/read correctly
  • 09461 DMI control_set not functioning as expected
  • 09555 DMI Model Wrapper progress bar does not turn red when process fails
  • 09549 DMI Model Wrapper progress bar does not turn green when process completes
  • 09556 DMI Model Wrapper should uncheck "Load Solution" when the user aborts.
  • 09550 CMS-Flow model does not write wind curve if no BC file is in the simulation
  • 09552 DMI Model Wrapper should change focus to a new process when it launches that process

GIS

  • 09561 Mapping .shp to Obstructions Coverage

Mesh

  • 09481 Incorrect Zonal Classification Output

General

  • 09557 Slow Display Response - Create Node Example

SMS 12.2.6 - March 21, 2017

Map

  • 09540 Offset Arcs Defaults and Saved Values

DMI

  • 09449 Assigning two arcs boundary conditions at the same time give DMI error and doesn't work
  • 09450 Changing model version number in XML makes project crash

Projection

  • 09430 Node Transformation Not Saved

Datasets

  • 09500 Dataset Toolbox Filter Issue

SRH-2D

  • 09535 Crash After SRH Run
  • 09537 Repeating Error Message about Boundary Node

SMS 12.2.5 - March 14, 2017

General

  • 09472 Help links for SRH-2D sediment transport dialogs don't work
  • 09436 Crash when using remote desktop

DMI

  • 09421 Inserting a row into a DMI table results in wrong row being active

ADH

  • 09424 Extra nodestring created when reading AdH model
  • 09423 SMS corrupts AdH nodestring

CMS-Flow

  • 09158 CMS-Flow Sediment Errors

Datasets

  • 09428 Dialog appears behind the working window

Quadtree

  • 09434 Generating a large quadtree causes SMS to crash

SRH-2D

  • 09422 Cursor spins and spins in DMI
  • 09432 SRH Materials Coverage and Sediment Materials Coverage Bad After Building New Polygons

SMS 12.2.4 - February 15, 2017

ADCIRC

  • 09219 ADCIRC Model Control Incorrect Tidal Amplitude

ADH

  • 09424 Extra nodestring created when reading AdH model
  • 09423 SMS corrupts AdH nodestring

CMS-FLOW

  • 09158 CMS-Flow Sediment Errors

Datasets

  • 09428 Dialog appears behind the working window

Display Options

  • 09351 Snap Preview when arc display option is off

Quadtree

  • 09434 Generating a large quadtree causes SMS to crash

SRH-2D

  • 09422 Cursor spins and spins in DMI
  • 09401 False model checker warning and SRH crash

SMS 12.2.3 - January 17, 2017

General

  • 09306 Can't use a German "umlaut" in an annotation string
  • 09309 Plot window appears when opening project with plots in community edition
  • 09307 Crash opening project in Community Edition
  • 09323 Recently opened file list is cleared when opening a project with a plot
  • 09321 Plot window is not restored when project with plot is opened
  • 09286 Displaying Cartesian grids in version 12 (and 13) is up to 2 orders of magnitude slower than version
  • 09208 SMS Disk I/O Performance
  • 09160 Incorrect Interpolation Menu for Rasters
  • 09346 Error message for overlapping arcs and error messages in general
  • 09310 The error message box has a redundant line that shows the type of error.
  • 09301 Organizing Linked Coverages Causes SMS to Become Unresponsive
  • 09382 Combined XYZ Length is incorrect for multiple arcs
  • 09384 Element material type reported for generic mesh

Datasets

  • 09314 Smoothing Dataset Taking a Very Long Time
  • 09187 Comparing Datasets Subtraction in SMS vs. Documentation

Display Options

  • 09290 Observation points not visible when display atts are turned on.

DMI

  • 09264 DMI export of coverage arcs and points of a polygon not working

Feature Objects

  • 09347 Lag in error message
  • 09342 Nodestring ID visibility
  • 09343 Renumber Nodestrings Changes Nodestring Direction
  • 09335 Renumbering nodestrings messes up weir directions
  • 09304 Select all for triangles does not show information
  • 09283 Mesh visibility affects extracted data in observation coverage
  • 09256 DMI polygon attributes lost

Grids

  • 09276 The weirs in an ADCIRC mesh don't save correctly

Mesh

  • 09333 Two types of unassigned ADCIRC nodestrings
  • 09205 Exported shapefile does not contain elevation data
  • 09280 Unexpected Warning Stating Bandwidth Unusually High
  • 09316 CGWAVE .cgi precision

Model Control

  • 08983 Curves and table values read from DMI H5 file not read in

Plots

  • 09322 Plot windows don't close on Delete All
  • 09289 Plot Wizard Display Options
  • 09239 Saving causes a crash when the data in the plot is not correct
  • 09328 Unable to save image file
  • 09390 SMS does not write SRH Input file for Internal Sink SRH Simulation
  • 09357 SRH QuickWin doesn't show Water Elevation Plot when run through SMS

UGrids

  • 09199 UGrid Interpolator doesn't allow Map to Z option

SMS 12.2.2 - November 14, 2016

ADCIRC

  • 09234 Crash performing Model Check

Map

  • 09185 1D Summary Table Crash
  • 09186 Can't close summary table dialog with X

Datasets

  • 09179 Unable to Perform Operation when Comparing Datasets in Data Set

Grids

  • 09255 CMS-Wave save creates invalid file if no spectra assigned

Mesh

  • 09210 Transform Command Invalidates Dataset
  • 09220 Mesh disappears from project
  • 09237 SMS crashes when merging nodestrings
  • 09231 Writing ADCIRC weirs nodestrings corrupted when a mesh is duplicated
  • 09139 ADCIRC BC types not correctly maintained when merging meshes

Online Maps

  • 09226 Map to Curvilinear function fails

General

  • 09228 Summary Table is only exported if the user types the file extension
  • 09227 Save File dialog has an Open button instead of Save
  • 09075 Check for Updates Not Working
  • 09200 SRH normal depth boundary condition issue

TUFLOW

  • 09221 TUFLOW results opening switches to scatter module
  • 09222 TUFLOW project loses Geometry Component

UGrid

  • 09215 Converting Quadtree to UGrid sometimes creates an extra folder

SMS 12.2.1 - October 10, 2016

Coverage

  • 09185 1D Summary Table Crash
  • 09186 Can't close summary table dialog with X`

Export

  • 09145 SMS Exporting HY8 Culvert Arc Nodestrings Incorrectly

Feature Objects

  • 09142 Revert subset hangs or crashes
  • 09138 Working in subset mode confuses ADCIRC boundary conditions
  • 09144 ADCIRC nodestring with multiple instances of same node not detected and fixed

Mesh

  • 09139 ADCIRC BC types not correctly maintained when merging meshes
  • 09057 Interpolating nodes puts mesh into disarray

Project Explorer

  • 09121 SMS DMI allows multiple coverages of same type to be added to a simulation if added by a single drag
  • 09122 Inconsistency of terminology when unlinking elements from a SRH-2D simulation

Projection

  • 09146 Opening ADCIRC mesh in geographic coords does not set the projection if the data spans the international date line

General

  • 09075 Check for Updates Not Working
  • 09172 Crash opening project with SRH model

SMS 12.2.0 - September 10, 2016

SMS 12.1 Release Bugfixes

SMS 12.1.10 - January 25, 2017

Annotation

  • 09306 Can't use a German "umlaut" in an annotation string

Dynamic Model

  • 09264 DMI export of coverage arcs and points of a polygon not working

Feature Objects

  • 09343 Renumber Nodestrings Changes Nodestring Direction
  • 09335 Renumbering nodestrings messes up weir directions
  • 09304 Select all for triangles does not show information
  • 09283 Mesh visibility affects extracted data in observation coverage
  • 09256 DMI polygon attributes lost

Grids

  • 09276 The weirs in an ADCIRC mesh don't save correctly

Mesh

  • 09333 Two types of unassigned ADCIRC nodestrings
  • 09205 Exported shapefile does not contain elevation data

Plots

  • 09289 Plot Wizard Display Options

UGrid

  • 09298 Dataset imported after exporting in H5 format from UGrid can't be read

General

  • 09301 Organizing Linked Coverages Causes SMS to Become Unresponsive
  • 09328 Unable to save image file
  • 09286 Displaying Cartesian grids in version 12 (and 13) is up to 2 orders of magnitude slower than version 11
  • 09208 SMS Disk I/O Performance

SMS 12.1.9 - November 16, 2016

ADCIRC

  • 09234 Crash performing Model Check

Grids

  • 09255 CMS-Wave save creates invalid file if no spectra assigned

Mesh

  • 09220 Mesh disappears from project
  • 09231 Writing ADCIRC weirs nodestrings corrupted when a mesh is duplicated
  • 09139 ADCIRC BC types not correctly maintained when merging meshes

General

  • 09075 Check for Updates Not Working
  • 09200 SRH normal depth boundary condition issue

TUFLOW

  • 09221 TUFLOW results opening switches to scatter module

SMS 12.1.8 - October 19, 2016

General

  • 09075 Check for Updates Not Working
  • 09145 SMS Exporting HY8 Culvert Arc Nodestrings Incorrectly
  • 09172 Crash opening project with SRH model
  • 09053 Default Help Option is said to be Online but Actually takes you to Local Help

Spectral Data

  • 09124 Crash When Using Display Tools in Spectral Energy Dialog

Projection

  • 09146 Opening ADCIRC mesh in geographic coords does not set the projection if the data spans the international date line

Plots

  • 09114 Isues with observation plots
  • 09020 Observation Plot Doesn't Look As Expected

Mesh

  • 09139 ADCIRC BC types not correctly maintained when merging meshes
  • 09057 Interpolating nodes puts mesh into disarray
  • 08824 Deleting points of a mesh in non-display projection forgets what it is doing

Map

  • 09127 Can't make observation arcs visible

Grids

  • 09113 Bad grid created from Generic Grid generator coverage when set to "Mesh Centered" type

Feature Objects

  • 09142 Revert subset hangs or crashes
  • 09138 Working in subset mode confuses ADCIRC boundary conditions
  • 09144 ADCIRC nodestring with multiple instances of same node not detected and fixed

Dynamic Model

  • 09042 No default display of snapped arcs

SMS 12.1.7 - August 13, 2016

ADCIRC

  • 08955 Edit fields for Harmonic parameters in files tab of ADCIRC model control
  • 08937 Spatial Attribute changes not saved

BOUSS2D

  • 09008 Crash When Attempting to Save, Export, and Launch BOUSS-2D Simulation

Contours

  • 08957 Can't populate contours with proper range of values

Datasets

  • 08974 Dataset conversion from vector to scalar not working for Quadtree from Toolbox

DISPLAY OPTIONS

  • 09046 Raster Display Doesn't Update Properly when Changing Point Size and Maximum Points
  • 08962 Incorrect update of CMS-Wave cell attribute display
  • 08939 Display doesn't refresh after pan

Dynamic Model

  • 09029 Can't run or specify location of aswip
  • 09027 DMI crash when referencing nonexistent dialog

Feature Objects

  • 08956 Select by Dataset Value does not work on UGrid Z dataset
  • 08952 ADCIRC Mesh elevations revert back to old values when reopening SMS and project
  • 08954 Nodestrings with Unassigned Boundary Conditions aren't Being Saved

General

  • 08979 Text of the Coverage to Smooth Button is Overflowing
  • 09024 SMS Steering Menu Item
  • 09070 User gets error message when canceling out of ImportWizard
  • 09041 SMS is Trying to Read in Files that it Shouldn't
  • 08960 Open File Format appears instead of an error message
  • 09069 SMS Coverage Duplicate Issues
  • 08942 Can't access right-click menu for datasets
  • 08963 PTM particles remain in display after deletion
  • 09040 Arc BC data not saved
  • 09087 The Time Step time is not being displayed when the time is 12:00:00 AM

Quadtree

  • 08949 Can’t edit quadtree scalar datasets
  • 08975 Quadtree transform fails to transform refined cell points
  • 08882 Quadtree Grid menu items

Raster

  • 08921 Raster Frame and Display
  • 08914 Crash trying to open .las file as "Raster"

Simulation

  • 08988 Crash When Creating New WAM Simulation

Spectral Data

  • 08972 The direction of the wave components converting from spectra to CGWAVE is not spectra dependent and is wrong
  • 08971 Converting spectra to CGWAVE wave components does not clear spectral list
  • 08940 Can't work with high number of spectral indices

SMS 12.1.6 - June 2, 2016

ADCIRC

  • 08899 ADCIRC solution with small timestep won't read in
  • 08813 Incorrect NWS value written to control file

BOUSS2D

  • 08768 B2D Wave maker minimum period (tmin) is not filled in anymore
  • 08767 B2D Warning of time range is wrong

Datasets

  • 08795 Map Elevation command doesn't use specified dataset
  • 08745 Floodway tool Crash
  • 08794 Scatter Visibility affects dataset used for interpolation
  • 08782 Data Calculator behavior type vs. paste
  • 08757 UGrid datasets generate their own dset contour options

Display

  • 08880 CGWAVE nodestrings are numbered with bogus IDs
  • 08865 Color of snap preview does not change after hitting OK

Export

  • 08797 DMI - If a curve is associated with a "set", it is not exported
  • 08765 BOUSS-2D damping dataset not computed completely

Feature Objects

  • 08766 Wave maker no longer shows direction
  • 08885 Weir from bug 8798 leaves elements in the interior
  • 08881 ADCIRC node strings not numbered correctly
  • 08798 Crash Creating ADCIRC Weir
  • 08777 Canceling In Select Dataset Dialog Changes Functional Surface Options

General

  • 08866 The Line Attributes dialog is not modal
  • 08868 XMDF File Not Loaded In Correctly
  • 08800 Functional Surface Won't Use User Defined Dataset

Interpolation

  • 08755 Interpoate from Quadtree to Scatter vector crashes

Map

  • 08829 Incorrect polygon fill display

Mesh

  • 08830 Preview Mesh leaves a gap in the mesh.
  • 08840 Issues with Functional Surface on Mesh
  • 08787 Map-2D Mesh with multiple rasters

Particles

  • 08856 Crash When Writing Particles Subset If the File Name Has not Been Set

Plots

  • 08763 Observation plots not consistent
  • 08764 Observation plot from Mesh is too long
  • 08762 DEM Observation plot of data doesn't show up

Project Explorer

  • 08769 SMS gets confused about the mesh module
  • 08746 Missing features for TUFLOW 1D

Projection

  • 08799 Missing Cross Section data in Summary Table
  • 08854 Crash After Reproject All

Raster

  • 08838 Incorrect Raster Elevations

Scatter Data

  • 08907 Saving an empty scatter set corrupts project.
  • 08908 Dialog indicates spacing is in meters when it is really in degrees
  • 08848 Crash Saving Project After Failed Interpolation
  • 08837 ADH Model Checker SI Units
  • 08847 Error When Using an Existing Dataset for Extrapolation

SRH-2D

  • 08748 Can't Open SRH solution after model run

TUFLOW

  • 08846 Crash Saving TUFLOW Project

SMS 12.1.5 - April 20, 2016

CMCARDS

  • 08739 Loading CMS-Flow project from SMS 11.2 does not associate the projection correctly

CMS Flow

  • 08668 CMS Project Crash
  • 08695 CMS-Flow Registration Item Disrupts SRH Coverages

Map

  • 08682 Selecting Polygons Takes a Long Time
  • 08690 SMS Does not Preserve "Bank" attribute type in the 1D Hydraulic Centerline Coverage

General

  • 08697 Splash Screen Causes SMS to Hang
  • 08702 SMS Main Menu, and Hot Key for Help Goes to Internet Only

GSSHA

  • 08642 GSSHA Upstream Culvert

Import

  • 08711 Opening multiple surveys at a single time gives error message

Mesh

  • 08730 Map->2D Mesh is too slow "Setting nodal z values..."

Models

  • 08575 Observation Data Cannot be Defined for stream arcs with an arc type of "General Stream"

Plots

  • 08581 Drogue plot shifts when zooming out

Quadtree

  • 08673 Problems Rotating on Quadtree/CGrid with Grid Frame
  • 08672 Able to Create Quadtree When Quadtree Not Enabled

Scatter Data

  • 08720 Converting coverage to spacing scatter gives wrong values
  • 08719 Converting coverage to scatter hangs

SRH-2D

  • 08747 Data sets don't appear under Mesh Data after running SRH-2D.
  • 08689 SMS Not Saving Populated WSE Value

SMS 12.1.3 - March 03, 2016

Contours

  • 08653 Contour options are not initialized on UGrid dsets after duplicate operation

General

  • 08593 Empty spreadsheet double cells crash xms
  • 08649 Crash opening .dep file
  • 08596 Polygon Fill Display Incorrect

Boundary Conditions

  • 08635 Snap Preview won't stay off

Dynamic Model Interface

  • 08622 DMI range type edit boxes change values on blur
  • 08623 DMI double clicking anywhere with polygon select tool enabled opens polygon attributes menu
  • 08637 DMI Building New Polygons Messes Up Dependencies on Old Polygons

Mesh

  • 08597 Mesh Paving Crash
  • 08604 Renumbering a mesh with gaps while color fill contours is on causes a crash

UGrid

  • 08595 UGrid Functional Surface doesn't display correctly when new active dataset selected

ADCIRC

  • 08607 ADCIRC files not copied to run directory when executing ADCIRC
  • 08606 SMS does not read in ADCIRC data correctly

Vectors

  • 08615 Vector to Scalars Command Generates Dataset with Incorrect Velocities

SRH-2D

  • 08608 SRH-2D material coverage created from FESWMS coverage has bad attributes for polygons

SMS 12.1.2 - January 24, 2016

Datasets

  • 08544 - Dataset compare feature is not working

DMI

  • 08527 - #file_name keyword is not accessible when process_on_condition is used in input_file

PBL

  • 08571 - PBL output grids not displayed correctly

FESWMS

  • 08536 - Crash After saving FESWMS Project and Reopening Saved Files

CMS-Wave

  • 08567 - Opening CMS-Wave simulation with the Display Projection set to Geographic creates incompatible display case

CMS-Flow

  • 08555 - Crash opening CMS-Flow project

Contours

  • 08478 - Contours change when they shouldn't
  • 08549 - Contour update issue on quadtrees after interpolating datasets from one to the Z of the other

Mesh

  • 08542 - Summary table from 2dMesh uses elevation value for all datasets
  • 08550 - Cannot edit multiple nodes simultaneously on a vtk mesh

Quadtree

  • 08547 - Min and max not set when interpolating one quadtree dataset to Z of another
  • 08493 - Quadtree Created in the Wrong Direction after Changing Coverage Types

General

  • 08566 - Date/Time stamps for the year 2000 - 2009 are read incorrectly when written with 8 digit format
  • 08563 - Cells in a table become blank
  • 08560 - SMS crashes when clicking the top left cell of the Linear BC table.
  • 08561 - Wording correcting in film loop error
  • 08557 - Merging coverages causes duplicate node ids
  • 08526 - Order, i_order, and j_order attributes have no effect on process_each_polygon operations on cgrids
  • 08481 - Redistribute Verices without cubic spline causes points in bad places
  • 08545 - Confirmation setting not used when deleting coverages with the "Del" key
  • 08404 - Saving and Reopening Coverages Removes Certain Characters
  • 08492 - Wrong Popup When Generating a CGrid with No Grid Frame

SMS 12.1.1 - December 07, 2015

CMS Flow

  • 08476 - Error Popup when Opening Old CMS-Flow Project File in 12.1

Coverage

  • 08519 - Merged coverage has inappropriate atts that cause a crash when cleaning
  • 08501 - Crash Deleting All Coverages

Feature Object

  • 08513 - Double-Clicking on point in DMI Coverage does not bring up dialog

Grids

  • 08508 - DMI unable to conditionally retrieve cell i and j based on bound coverage attribute
  • 08511 - Points Snap to Incorrect CGRID Cells During CMS-WAVE2 DMI Export

Map

  • 08496 - Strange Behavior and Crash When Merging Polygons
  • 08495 - Crash When Merging Polygons
  • 08452 - Redistribution of arc that is not in display projection causes problems

Mesh

  • 08483 - Incorrect mesh preview in polygon attributes
  • 08499 - Incorrect Mapping of BC arc to mesh
  • 08491 - Crash committing mesh subset
  • 08502 - SMS deletes duplicate elements without reporting what elements are being deleted

Opening File

  • 08494 - Crash or Hang when opening project
  • 08507 - Cross sectional database with "." in the name gets trimmed

Project

  • 08522 - Crash Opening SRH Tutorial

Project Explorer

  • 08330 - Project Explorer Items not updating their display properly

Quadtree

  • 08493 - Quadtree Created in the Wrong Direction after Changing Coverage Types

Raster

  • 08488 - Observation plot options allow user to select images if raster is loaded, but then says it is invalid

Saving

  • 08473 - Crash during save of generic model

Scatter Data

  • 08482 - Crash loading project file merging dynamic database (MergeAfterAllFilesReadIn)

SMS 12.1.0 - Release November 17, 2015

Older Bugfixes

For older versions of SMS that are no longer actively supported, see the individual bugfix articles:

Bugfix Article Release Notes
Bugfixes SMS 10.0 SMS 10.0 Intermediate Release
Bugfixes SMS 10.1 SMS 10.1 Intermediate Release
Bugfixes SMS 11.0 SMS 11.0 Intermediate Release
Bugfixes SMS 11.1 SMS 11.1 Intermediate Release
Bugfixes SMS 11.2 SMS 11.2 Intermediate Release
Bugfixes SMS 12.0 SMS 12.0 Intermediate Release

Related Topics