SMS:Release Notes SMS

From XMS Wiki
Jump to navigationJump to search


The SMS Intermediate Release Bugfixes page for released versions of SMS:

SMS 12.2 Release Bugfixes

SMS 12.2.9 - August 16, 2017

BOUSS2D

  • 09811 Crash when loading project or when attempting to modify model control of Bouss-2D Simulation without grid
  • 09623 Update for the min recommended depth for BOUSS2D

Coverage

  • 09733 Summary table gives results for only one cross section coverage
  • 09732 Must select centerline coverage for each cross section when generating a summary table

General

  • 09503 Smoothing dataset in scatter has no effect
  • 09830 CMS-Flow Bed Layer Section of Card File Exported Incorrectly
  • 09718 CSDB not being saved with the project
  • 09676 Dataset Toolbox Grid Spacing Tool very slow
  • 09755 Selecting radio buttons in the Extract Cross Sections window turns off radio buttons in other sections
  • 09785 Incorrect Unit Label in "Populate" WSE Tool
  • 09771 Summary Table spreadsheet too big
  • 09729 Feature Stamping doesn't properly trim/intersect surface

Map

  • 09724 CAD to Map Snapping Options Ignored
  • 09780 Crash opening map file

Plots

  • 09719 Plot settings get reset when they shouldn't
  • 09774 Incorrect Errors Reported in Error Plots

Quadtree

  • 09766 Converting Quadtree to Ugrid changes the cell centered datasets to pt centered 06-19-2017
  • 09763 SMS 12.2 missing ability to compute volume on a Quadtree 06-14-2017

Scatter Data

  • 09629 Map->Scatter Not using arc elevations as specified

Summary Table

  • 09819 Generating Summary Table with Mesh Toggled Off Generates Unreliable Results
  • 09818 Summary Table Flows
  • 09734 Specified Datasets not used in Summary Table
  • 09720 Summary Table not working as it should
  • 09734 Specified Datasets not used in Summary Table

SMS 12.2.8 - June 20, 2017

Display Options

  • 09655 Display appears to be missing some curved arrows

Feature Objects

  • 09634 SRH-2D Boundary condition gets corrupted
  • 09632 Can't merge CGrid Rows or Columns

General

  • 09742 GUI Test: Crash when redistributing vertices after doing a Delete All
  • 09730 Changing Temp Directory can create multiple file browser dialogs
  • 09678 Can't change temp directory
  • 09567 SMS hangs creating water level arcs for TUFLOW coverage
  • 09633 Dimming of widgets in Feature Stamping Dialog
  • 09363 Minor PTM error message when saving project
  • 09717 Line properties from HEC-RAS not read into SMS

Mesh

  • 09663 Crash Merging Meshes

Plots

  • 09653 ARR Plot takes too long to come up and is too sensitive

Projection

  • 09654 Converting mesh boundary to "unprojected" coverage gives wrong result

Scatter Data

  • 09625 The Scatter Contour to Feature arc dialog can become too small
  • 09566 SMS hangs merging scatter sets

SRH-2D

  • 09681 Incorrect formatting for Supercritical BC for SRH
  • 09616 SRH-Pre Cannot read Sediment Gradation XYS files that Have a Space in the Name

SMS 12.2.7 - April 11, 2017

ADCIRC

  • 09425 SMS Freezes in Spacial Attributes Dialog

CMCARDS

  • 09571 Crash opening cmcards file

DMI

  • 09461 DMI control_set not functioning as expected
  • 09551 The DMI puts a lock on the executable and doesn't release it
  • 09330 Polygon attributes in DMI coverages not being saved/read correctly
  • 09461 DMI control_set not functioning as expected
  • 09555 DMI Model Wrapper progress bar does not turn red when process fails
  • 09549 DMI Model Wrapper progress bar does not turn green when process completes
  • 09556 DMI Model Wrapper should uncheck "Load Solution" when the user aborts.
  • 09550 CMS-Flow model does not write wind curve if no BC file is in the simulation
  • 09552 DMI Model Wrapper should change focus to a new process when it launches that process

GIS

  • 09561 Mapping .shp to Obstructions Coverage

Mesh

  • 09481 Incorrect Zonal Classification Output

General

  • 09557 Slow Display Response - Create Node Example

SMS 12.2.6 - March 21, 2017

Map

  • 09540 Offset Arcs Defaults and Saved Values

DMI

  • 09449 Assigning two arcs boundary conditions at the same time give DMI error and doesn't work
  • 09450 Changing model version number in XML makes project crash

Projection

  • 09430 Node Transformation Not Saved

Datasets

  • 09500 Dataset Toolbox Filter Issue

SRH-2D

  • 09535 Crash After SRH Run
  • 09537 Repeating Error Message about Boundary Node

SMS 12.2.5 - March 14, 2017

General

  • 09472 Help links for SRH-2D sediment transport dialogs don't work
  • 09436 Crash when using remote desktop

DMI

  • 09421 Inserting a row into a DMI table results in wrong row being active

ADH

  • 09424 Extra nodestring created when reading AdH model
  • 09423 SMS corrupts AdH nodestring

CMS-Flow

  • 09158 CMS-Flow Sediment Errors

Datasets

  • 09428 Dialog appears behind the working window

Quadtree

  • 09434 Generating a large quadtree causes SMS to crash

SRH-2D

  • 09422 Cursor spins and spins in DMI
  • 09432 SRH Materials Coverage and Sediment Materials Coverage Bad After Building New Polygons

SMS 12.2.4 - February 15, 2017

ADCIRC

  • 09219 ADCIRC Model Control Incorrect Tidal Amplitude

ADH

  • 09424 Extra nodestring created when reading AdH model
  • 09423 SMS corrupts AdH nodestring

CMS-FLOW

  • 09158 CMS-Flow Sediment Errors

Datasets

  • 09428 Dialog appears behind the working window

Display Options

  • 09351 Snap Preview when arc display option is off

Quadtree

  • 09434 Generating a large quadtree causes SMS to crash

SRH-2D

  • 09422 Cursor spins and spins in DMI
  • 09401 False model checker warning and SRH crash

SMS 12.2.3 - January 17, 2017

General

  • 09306 Can't use a German "umlaut" in an annotation string
  • 09309 Plot window appears when opening project with plots in community edition
  • 09307 Crash opening project in Community Edition
  • 09323 Recently opened file list is cleared when opening a project with a plot
  • 09321 Plot window is not restored when project with plot is opened
  • 09286 Displaying Cartesian grids in version 12 (and 13) is up to 2 orders of magnitude slower than version
  • 09208 SMS Disk I/O Performance
  • 09160 Incorrect Interpolation Menu for Rasters
  • 09346 Error message for overlapping arcs and error messages in general
  • 09310 The error message box has a redundant line that shows the type of error.
  • 09301 Organizing Linked Coverages Causes SMS to Become Unresponsive
  • 09382 Combined XYZ Length is incorrect for multiple arcs
  • 09384 Element material type reported for generic mesh

Datasets

  • 09314 Smoothing Dataset Taking a Very Long Time
  • 09187 Comparing Datasets Subtraction in SMS vs. Documentation

Display Options

  • 09290 Observation points not visible when display atts are turned on.

DMI

  • 09264 DMI export of coverage arcs and points of a polygon not working

Feature Objects

  • 09347 Lag in error message
  • 09342 Nodestring ID visibility
  • 09343 Renumber Nodestrings Changes Nodestring Direction
  • 09335 Renumbering nodestrings messes up weir directions
  • 09304 Select all for triangles does not show information
  • 09283 Mesh visibility affects extracted data in observation coverage
  • 09256 DMI polygon attributes lost

Grids

  • 09276 The weirs in an ADCIRC mesh don't save correctly

Mesh

  • 09333 Two types of unassigned ADCIRC nodestrings
  • 09205 Exported shapefile does not contain elevation data
  • 09280 Unexpected Warning Stating Bandwidth Unusually High
  • 09316 CGWAVE .cgi precision

Model Control

  • 08983 Curves and table values read from DMI H5 file not read in

Plots

  • 09322 Plot windows don't close on Delete All
  • 09289 Plot Wizard Display Options
  • 09239 Saving causes a crash when the data in the plot is not correct
  • 09328 Unable to save image file
  • 09390 SMS does not write SRH Input file for Internal Sink SRH Simulation
  • 09357 SRH QuickWin doesn't show Water Elevation Plot when run through SMS

UGrids

  • 09199 UGrid Interpolator doesn't allow Map to Z option

SMS 12.2.2 - November 14, 2016

ADCIRC

  • 09234 Crash performing Model Check

Map

  • 09185 1D Summary Table Crash
  • 09186 Can't close summary table dialog with X

Datasets

  • 09179 Unable to Perform Operation when Comparing Datasets in Data Set

Grids

  • 09255 CMS-Wave save creates invalid file if no spectra assigned

Mesh

  • 09210 Transform Command Invalidates Dataset
  • 09220 Mesh disappears from project
  • 09237 SMS crashes when merging nodestrings
  • 09231 Writing ADCIRC weirs nodestrings corrupted when a mesh is duplicated
  • 09139 ADCIRC BC types not correctly maintained when merging meshes

Online Maps

  • 09226 Map to Curvilinear function fails

General

  • 09228 Summary Table is only exported if the user types the file extension
  • 09227 Save File dialog has an Open button instead of Save
  • 09075 Check for Updates Not Working
  • 09200 SRH normal depth boundary condition issue

TUFLOW

  • 09221 TUFLOW results opening switches to scatter module
  • 09222 TUFLOW project loses Geometry Component

UGrid

  • 09215 Converting Quadtree to UGrid sometimes creates an extra folder

SMS 12.2.1 - October 10, 2016

Coverage

  • 09185 1D Summary Table Crash
  • 09186 Can't close summary table dialog with X`

Export

  • 09145 SMS Exporting HY8 Culvert Arc Nodestrings Incorrectly

Feature Objects

  • 09142 Revert subset hangs or crashes
  • 09138 Working in subset mode confuses ADCIRC boundary conditions
  • 09144 ADCIRC nodestring with multiple instances of same node not detected and fixed

Mesh

  • 09139 ADCIRC BC types not correctly maintained when merging meshes
  • 09057 Interpolating nodes puts mesh into disarray

Project Explorer

  • 09121 SMS DMI allows multiple coverages of same type to be added to a simulation if added by a single drag
  • 09122 Inconsistency of terminology when unlinking elements from a SRH-2D simulation

Projection

  • 09146 Opening ADCIRC mesh in geographic coords does not set the projection if the data spans the international date line

General

  • 09075 Check for Updates Not Working
  • 09172 Crash opening project with SRH model

SMS 12.2.0 - September 10, 2016

SMS 12.1 Release Bugfixes

SMS 12.1.10 - January 25, 2017

Annotation

  • 09306 Can't use a German "umlaut" in an annotation string

Dynamic Model

  • 09264 DMI export of coverage arcs and points of a polygon not working

Feature Objects

  • 09343 Renumber Nodestrings Changes Nodestring Direction
  • 09335 Renumbering nodestrings messes up weir directions
  • 09304 Select all for triangles does not show information
  • 09283 Mesh visibility affects extracted data in observation coverage
  • 09256 DMI polygon attributes lost

Grids

  • 09276 The weirs in an ADCIRC mesh don't save correctly

Mesh

  • 09333 Two types of unassigned ADCIRC nodestrings
  • 09205 Exported shapefile does not contain elevation data

Plots

  • 09289 Plot Wizard Display Options

UGrid

  • 09298 Dataset imported after exporting in H5 format from UGrid can't be read

General

  • 09301 Organizing Linked Coverages Causes SMS to Become Unresponsive
  • 09328 Unable to save image file
  • 09286 Displaying Cartesian grids in version 12 (and 13) is up to 2 orders of magnitude slower than version 11
  • 09208 SMS Disk I/O Performance

SMS 12.1.9 - November 16, 2016

ADCIRC

  • 09234 Crash performing Model Check

Grids

  • 09255 CMS-Wave save creates invalid file if no spectra assigned

Mesh

  • 09220 Mesh disappears from project
  • 09231 Writing ADCIRC weirs nodestrings corrupted when a mesh is duplicated
  • 09139 ADCIRC BC types not correctly maintained when merging meshes

General

  • 09075 Check for Updates Not Working
  • 09200 SRH normal depth boundary condition issue

TUFLOW

  • 09221 TUFLOW results opening switches to scatter module

SMS 12.1.8 - October 19, 2016

General

  • 09075 Check for Updates Not Working
  • 09145 SMS Exporting HY8 Culvert Arc Nodestrings Incorrectly
  • 09172 Crash opening project with SRH model
  • 09053 Default Help Option is said to be Online but Actually takes you to Local Help

Spectral Data

  • 09124 Crash When Using Display Tools in Spectral Energy Dialog

Projection

  • 09146 Opening ADCIRC mesh in geographic coords does not set the projection if the data spans the international date line

Plots

  • 09114 Isues with observation plots
  • 09020 Observation Plot Doesn't Look As Expected

Mesh

  • 09139 ADCIRC BC types not correctly maintained when merging meshes
  • 09057 Interpolating nodes puts mesh into disarray
  • 08824 Deleting points of a mesh in non-display projection forgets what it is doing

Map

  • 09127 Can't make observation arcs visible

Grids

  • 09113 Bad grid created from Generic Grid generator coverage when set to "Mesh Centered" type

Feature Objects

  • 09142 Revert subset hangs or crashes
  • 09138 Working in subset mode confuses ADCIRC boundary conditions
  • 09144 ADCIRC nodestring with multiple instances of same node not detected and fixed

Dynamic Model

  • 09042 No default display of snapped arcs

SMS 12.1.7 - August 13, 2016

ADCIRC

  • 08955 Edit fields for Harmonic parameters in files tab of ADCIRC model control
  • 08937 Spatial Attribute changes not saved

BOUSS2D

  • 09008 Crash When Attempting to Save, Export, and Launch BOUSS-2D Simulation

Contours

  • 08957 Can't populate contours with proper range of values

Datasets

  • 08974 Dataset conversion from vector to scalar not working for Quadtree from Toolbox

DISPLAY OPTIONS

  • 09046 Raster Display Doesn't Update Properly when Changing Point Size and Maximum Points
  • 08962 Incorrect update of CMS-Wave cell attribute display
  • 08939 Display doesn't refresh after pan

Dynamic Model

  • 09029 Can't run or specify location of aswip
  • 09027 DMI crash when referencing nonexistent dialog

Feature Objects

  • 08956 Select by Dataset Value does not work on UGrid Z dataset
  • 08952 ADCIRC Mesh elevations revert back to old values when reopening SMS and project
  • 08954 Nodestrings with Unassigned Boundary Conditions aren't Being Saved

General

  • 08979 Text of the Coverage to Smooth Button is Overflowing
  • 09024 SMS Steering Menu Item
  • 09070 User gets error message when canceling out of ImportWizard
  • 09041 SMS is Trying to Read in Files that it Shouldn't
  • 08960 Open File Format appears instead of an error message
  • 09069 SMS Coverage Duplicate Issues
  • 08942 Can't access right-click menu for datasets
  • 08963 PTM particles remain in display after deletion
  • 09040 Arc BC data not saved
  • 09087 The Time Step time is not being displayed when the time is 12:00:00 AM

Quadtree

  • 08949 Can’t edit quadtree scalar datasets
  • 08975 Quadtree transform fails to transform refined cell points
  • 08882 Quadtree Grid menu items

Raster

  • 08921 Raster Frame and Display
  • 08914 Crash trying to open .las file as "Raster"

Simulation

  • 08988 Crash When Creating New WAM Simulation

Spectral Data

  • 08972 The direction of the wave components converting from spectra to CGWAVE is not spectra dependent and is wrong
  • 08971 Converting spectra to CGWAVE wave components does not clear spectral list
  • 08940 Can't work with high number of spectral indices

SMS 12.1.6 - June 2, 2016

ADCIRC

  • 08899 ADCIRC solution with small timestep won't read in
  • 08813 Incorrect NWS value written to control file

BOUSS2D

  • 08768 B2D Wave maker minimum period (tmin) is not filled in anymore
  • 08767 B2D Warning of time range is wrong

Datasets

  • 08795 Map Elevation command doesn't use specified dataset
  • 08745 Floodway tool Crash
  • 08794 Scatter Visibility affects dataset used for interpolation
  • 08782 Data Calculator behavior type vs. paste
  • 08757 UGrid datasets generate their own dset contour options

Display

  • 08880 CGWAVE nodestrings are numbered with bogus IDs
  • 08865 Color of snap preview does not change after hitting OK

Export

  • 08797 DMI - If a curve is associated with a "set", it is not exported
  • 08765 BOUSS-2D damping dataset not computed completely

Feature Objects

  • 08766 Wave maker no longer shows direction
  • 08885 Weir from bug 8798 leaves elements in the interior
  • 08881 ADCIRC node strings not numbered correctly
  • 08798 Crash Creating ADCIRC Weir
  • 08777 Canceling In Select Dataset Dialog Changes Functional Surface Options

General

  • 08866 The Line Attributes dialog is not modal
  • 08868 XMDF File Not Loaded In Correctly
  • 08800 Functional Surface Won't Use User Defined Dataset

Interpolation

  • 08755 Interpoate from Quadtree to Scatter vector crashes

Map

  • 08829 Incorrect polygon fill display

Mesh

  • 08830 Preview Mesh leaves a gap in the mesh.
  • 08840 Issues with Functional Surface on Mesh
  • 08787 Map-2D Mesh with multiple rasters

Particles

  • 08856 Crash When Writing Particles Subset If the File Name Has not Been Set

Plots

  • 08763 Observation plots not consistent
  • 08764 Observation plot from Mesh is too long
  • 08762 DEM Observation plot of data doesn't show up

Project Explorer

  • 08769 SMS gets confused about the mesh module
  • 08746 Missing features for TUFLOW 1D

Projection

  • 08799 Missing Cross Section data in Summary Table
  • 08854 Crash After Reproject All

Raster

  • 08838 Incorrect Raster Elevations

Scatter Data

  • 08907 Saving an empty scatter set corrupts project.
  • 08908 Dialog indicates spacing is in meters when it is really in degrees
  • 08848 Crash Saving Project After Failed Interpolation
  • 08837 ADH Model Checker SI Units
  • 08847 Error When Using an Existing Dataset for Extrapolation

SRH-2D

  • 08748 Can't Open SRH solution after model run

TUFLOW

  • 08846 Crash Saving TUFLOW Project

SMS 12.1.5 - April 20, 2016

CMCARDS

  • 08739 Loading CMS-Flow project from SMS 11.2 does not associate the projection correctly

CMS Flow

  • 08668 CMS Project Crash
  • 08695 CMS-Flow Registration Item Disrupts SRH Coverages

Map

  • 08682 Selecting Polygons Takes a Long Time
  • 08690 SMS Does not Preserve "Bank" attribute type in the 1D Hydraulic Centerline Coverage

General

  • 08697 Splash Screen Causes SMS to Hang
  • 08702 SMS Main Menu, and Hot Key for Help Goes to Internet Only

GSSHA

  • 08642 GSSHA Upstream Culvert

Import

  • 08711 Opening multiple surveys at a single time gives error message

Mesh

  • 08730 Map->2D Mesh is too slow "Setting nodal z values..."

Models

  • 08575 Observation Data Cannot be Defined for stream arcs with an arc type of "General Stream"

Plots

  • 08581 Drogue plot shifts when zooming out

Quadtree

  • 08673 Problems Rotating on Quadtree/CGrid with Grid Frame
  • 08672 Able to Create Quadtree When Quadtree Not Enabled

Scatter Data

  • 08720 Converting coverage to spacing scatter gives wrong values
  • 08719 Converting coverage to scatter hangs

SRH-2D

  • 08747 Data sets don't appear under Mesh Data after running SRH-2D.
  • 08689 SMS Not Saving Populated WSE Value

SMS 12.1.3 - March 03, 2016

Contours

  • 08653 Contour options are not initialized on UGrid dsets after duplicate operation

General

  • 08593 Empty spreadsheet double cells crash xms
  • 08649 Crash opening .dep file
  • 08596 Polygon Fill Display Incorrect

Boundary Conditions

  • 08635 Snap Preview won't stay off

Dynamic Model Interface

  • 08622 DMI range type edit boxes change values on blur
  • 08623 DMI double clicking anywhere with polygon select tool enabled opens polygon attributes menu
  • 08637 DMI Building New Polygons Messes Up Dependencies on Old Polygons

Mesh

  • 08597 Mesh Paving Crash
  • 08604 Renumbering a mesh with gaps while color fill contours is on causes a crash

UGrid

  • 08595 UGrid Functional Surface doesn't display correctly when new active dataset selected

ADCIRC

  • 08607 ADCIRC files not copied to run directory when executing ADCIRC
  • 08606 SMS does not read in ADCIRC data correctly

Vectors

  • 08615 Vector to Scalars Command Generates Dataset with Incorrect Velocities

SRH-2D

  • 08608 SRH-2D material coverage created from FESWMS coverage has bad attributes for polygons

SMS 12.1.2 - January 24, 2016

Datasets

  • 08544 - Dataset compare feature is not working

DMI

  • 08527 - #file_name keyword is not accessible when process_on_condition is used in input_file

PBL

  • 08571 - PBL output grids not displayed correctly

FESWMS

  • 08536 - Crash After saving FESWMS Project and Reopening Saved Files

CMS-Wave

  • 08567 - Opening CMS-Wave simulation with the Display Projection set to Geographic creates incompatible display case

CMS-Flow

  • 08555 - Crash opening CMS-Flow project

Contours

  • 08478 - Contours change when they shouldn't
  • 08549 - Contour update issue on quadtrees after interpolating datasets from one to the Z of the other

Mesh

  • 08542 - Summary table from 2dMesh uses elevation value for all datasets
  • 08550 - Cannot edit multiple nodes simultaneously on a vtk mesh

Quadtree

  • 08547 - Min and max not set when interpolating one quadtree dataset to Z of another
  • 08493 - Quadtree Created in the Wrong Direction after Changing Coverage Types

General

  • 08566 - Date/Time stamps for the year 2000 - 2009 are read incorrectly when written with 8 digit format
  • 08563 - Cells in a table become blank
  • 08560 - SMS crashes when clicking the top left cell of the Linear BC table.
  • 08561 - Wording correcting in film loop error
  • 08557 - Merging coverages causes duplicate node ids
  • 08526 - Order, i_order, and j_order attributes have no effect on process_each_polygon operations on cgrids
  • 08481 - Redistribute Verices without cubic spline causes points in bad places
  • 08545 - Confirmation setting not used when deleting coverages with the "Del" key
  • 08404 - Saving and Reopening Coverages Removes Certain Characters
  • 08492 - Wrong Popup When Generating a CGrid with No Grid Frame

SMS 12.1.1 - December 07, 2015

CMS Flow

  • 08476 - Error Popup when Opening Old CMS-Flow Project File in 12.1

Coverage

  • 08519 - Merged coverage has inappropriate atts that cause a crash when cleaning
  • 08501 - Crash Deleting All Coverages

Feature Object

  • 08513 - Double-Clicking on point in DMI Coverage does not bring up dialog

Grids

  • 08508 - DMI unable to conditionally retrieve cell i and j based on bound coverage attribute
  • 08511 - Points Snap to Incorrect CGRID Cells During CMS-WAVE2 DMI Export

Map

  • 08496 - Strange Behavior and Crash When Merging Polygons
  • 08495 - Crash When Merging Polygons
  • 08452 - Redistribution of arc that is not in display projection causes problems

Mesh

  • 08483 - Incorrect mesh preview in polygon attributes
  • 08499 - Incorrect Mapping of BC arc to mesh
  • 08491 - Crash committing mesh subset
  • 08502 - SMS deletes duplicate elements without reporting what elements are being deleted

Opening File

  • 08494 - Crash or Hang when opening project
  • 08507 - Cross sectional database with "." in the name gets trimmed

Project

  • 08522 - Crash Opening SRH Tutorial

Project Explorer

  • 08330 - Project Explorer Items not updating their display properly

Quadtree

  • 08493 - Quadtree Created in the Wrong Direction after Changing Coverage Types

Raster

  • 08488 - Observation plot options allow user to select images if raster is loaded, but then says it is invalid

Saving

  • 08473 - Crash during save of generic model

Scatter Data

  • 08482 - Crash loading project file merging dynamic database (MergeAfterAllFilesReadIn)

SMS 12.1.0 - Release November 17, 2015

SMS 12.0 Release Bugfixes

SMS 12.0.7 - Release October 22, 2015

  • Contours
    • 8278 - Functional surface contour dialog name incomplete
  • Generic Model
    • 8223 - ADH Hotstart folder created when switching models
  • GIS
    • 8092 - Crash on Exit when working with GIS data
  • HY-8
    • 8250 - SMS not specifying the location of the HY-8 executable in the preferences
  • Import
    • 8261 - Update for Import Options in Tutorials
  • Mesh
    • 7912 - Scalar Paving Meshing Results not Accurate
    • 8254 - GIS right click menus not finished
    • 8248 - Can't Create mesh nodes when only SRH Interface enabled
    • 8296 - Global parameters problems in .2dm file
    • 8280 - SMS doesn't detect the mesh nodes (or the mesh at all)
    • 8268 - Projection not matching when trying to enter mesh subset edit
    • 8224 - Incorrect Z Values assigned to nodes when performing Map->2D Mesh
  • NOAA
    • 8270 - Tidal Data commands for the Web menu do nothing
  • Quadtree
    • 8360 - Quadtree hides the contour legend and arrow become transparent
  • SRH-2D
    • 8307 - SRH2D Obstruction Arc Direction Causes Termination of SRH2D
    • 8263 - SRH-2D Time Series Option Displaying when it should not be displayed
    • 8216 - Observation Profile Plot not Updating to Show the Active Timestep
    • 8210 - Simple Z lines not writing to the .tgc file

SMS 12.0.6 - Release August 21, 2015

ADCIRC

  • 8207 SMS crashes when loading fort.45.

BOUSS2D

  • 8214 STWAVE mentioned in model checker description instead of BOUSS2D
  • 8191 SMS automatically cycles through time steps of BOUSS2D WSE Animation output dataset

Cartesian Grid

  • 8095 Generic CGrids are not saved with a project

GenCade

  • 8209 Inlets (Reservoir Model and Jetties) dialog typo
  • 8194 GenCade coverages lose attributes when merged

Generic Model

  • 8223 ADH Hotstart folder created when switching from ADH to Generic model

Import Options

  • 8244 Name of 'Z' dataset not correct

Mesh

  • 8229 Crash computing mesh spacing
  • 8153 Long Processing Time for Map->2D Mesh

Plots

  • 8216 Observation Profile Plot not Updating to Show the Active Timestep
  • 8196 Crash Toggling through Timesteps with Observation Profile 2D Plot

SRH-2D

  • 8171 SRH-2D Obstruction Coverage Issues
  • 8173 SRH-2D and HY8 Runaway Processes

STWAVE

  • 8201 STWAVE sim file import does not read projection

TUFLOW

  • 8210 Simple Z lines not writing to the .tgc file

WAM

  • 8114 WAM spectral site menu command Spectral Energy... doesn't work

General

  • 8208 SMS crashes when reopening the current open project.
  • 8083 PTM Waves and Breaking Input File Option cannot be removed from the model


SMS 12.0.5 - Release August 4, 2015

ADCIRC

  • 8188 SMS crashes when opening multiple files including fort.64 fort.64 and other ADCIRC files.
  • 8177 Fixed errors in ADCIRC LTEA tutorial to work with recent changes to the LTEA meshing toolbox.
  • 8104 SMS was not creating the unit 23 file even when it was set to be created.

ADH

  • 7984 Fixed issues with the sidewall boundary conditions.

BOUSS-2D

  • 8117 BOUSS-2D Generating arcs along land boundaries not using elevation scalar set.

CGWAVE

  • 8184 Unable to read in the solutions .cgo file.

General

  • 8108 Can't delete items from project.
  • 8180 Save tabular data mixing of meshes and datasets.
  • 8107 Project corrupted after saving in certain cases.
  • 8157 Delete key unresponsive when deleting arcs and other map objects.
  • 8130 Deleting datasets that are changed outside of SMS caused datasets in the project tree to be deleted
  • 8123 Removed unnecessary messages from Delete All operation.
  • 8125 Reading in a Materials file with foreign characters does not read in properly.
  • 8026 Removed unnecessary message about remote desktop from startup.

Images/GIS

  • 8164 Can't save project with DGN data.
  • 8138 MIF/MID importing errors.

Map

  • 8159 Creating arcs caused node numbering to change, and added gaps.
  • 8158 Can't find feature point by ID.
  • 8100 Incorrect Extracted Values at Observation Arcs.
  • 8033 Right-Click Menu not defined for dynamic maps.

2D-Mesh

  • 8168 Mesh generation toolbox was missing in the menu for ADCIRC.
  • 8162 Unable to deselect feature objects while multi-selecting in 2D mesh polygon properties dialogue.
  • 8152 Incorrect snap preview.
  • 8097 Mesh created with overlapping elements.
  • 8116 SMS Not exporting BC node strings correctly.
  • 8098 Crash optimizing triangulation of SMS generated mesh.
  • 8099 SMS saves bad mesh after refining elements.
  • 8091 Crash Interpolating scatter to mesh.

Scatter Data

  • 8151 Can't merge scatter sets after using to much memory.
  • 8154 Incorrect extracted plot from scatter in certain cases.

Simulations

  • 8110 Model checker sometimes doesn't recognize the mesh and materials that are in the project.

SRH-2D

  • 8186 user defined weir coefficient input boxes displayed for wrong options.
  • 8161 has no upstream/downstream arc assignment when using paired boundary.
  • 8167 Model control label is "Total Simulation Time" when it should be "Simulation End Time".
  • 8160 material display options not working as expected on SRH-2D boundary condition meshes.

TINs

  • 8137 Selecting triangles of a TIN causes SMS to crash in certain cases.

WAM

  • 8061 Model check not functioning properly.
  • 8062 Tutorial model does not run successfully.

SMS 12.0.4 - Release June 16, 2015

ADCIRC

  • 8031 Loading ADCIRC Meshes Causes Multiple Meshes with the Same Name

CMS

  • 8068 CMS Model Check and Sediment Datasets

Dynamic Model Interface

  • 7978 dataset not saved in DMI

Generic Model

  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect

General

  • 8060 Scale/Printing Issue
  • 8080 Displayed snapping location is wrong when first opening the project
  • 8029 Zoom to Selection Not working when display features are turned off
  • 8067 Printing crash
  • 8025 SMS does not remember the path to the HY8 executable if the registry is already set
  • 8050 Slow vector display
  • 8048 Plot From Observation Profile Not Appearing In Graph
  • 8015 projection changes on load
  • 8041 Non-admin user with partial SMS license can't set file paths
  • 8008 Incorrect Profile Plot
  • 7834 Various issues found while working on East End Bay project
  • 7998 Reading project file hangs SMS

Images/GIS

  • 8030 Shapes→Map and can create duplicate coverage names

Map

  • 7591 Redistribute arc using source/target fails with bias distribution on source
  • 8024 Spectral coverage "Projection.." right-click menu item does nothing

2D-Mesh

  • 8079 Rectangular patch not clearing previous mesh
  • 8052 Datasets not included in Mesh→Scatter Operation
  • 8028 Saving Mesh Subsets
  • 8023 snapping elements not correct
  • 7940 BC lost when editing mesh subset
  • 7918 Z direction of multiple meshes flips

SRH-2D

  • 8032 SRH Not Outputting at Specified Interval
  • 8071 Incorrect display of SRH boundary condition labels
  • 8073 Changing one SRH-2D BC coverage changes other SRH-2D BC coverage
  • 8064 SRH-2D Model Checker Crashes
  • 8034 Time series curves linked on duplicate SRH BC coverages
  • 7461 SRH Variable WSE tutorial files don't work
  • 8016 SRH-2D Duplicate Coverage Errors
  • 7999 The SRH-2D DMI writes multiple pressure cards in srhhydro file incorrectly

STWAVE

  • 7345 Can't run STWAVE through SMS

SMS 12.0.3 - Release May 20, 2015

ADCIRC

  • 7917 Single node value not editable for ADCIRC nodal attribute

ADH

  • 7961 SMS hangs when opening ADH solution file
  • 7878 ADH materials can't be deleted

BOUSS Runup/Overtopping

  • 7942 Checkboxes in Runup/Overtopping Model Control Dialog Aren't Being Initialized

Dynamic Model Interface

  • 7978 dataset not saved in DMI

General

  • 8008 Incorrect Profile Plot
  • 7834 Various issues found while working on East End Bay project
  • 7998 Reading project file hangs SMS
  • 7963 The case of the mysterious red rectangle
  • 7951 Vertical Units Undefined
  • 7949 Crash performing Model Check
  • 7934 Unidentified Label in Node Options
  • 7938 File Import Wizard Hangs SMS

Generic Model

  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect
  • 7979 Cell sizes change with reprojection

Map

  • 8024 Spectral coverage "Projection.." right-click menu item does nothing
  • 7975 Incorrect BC arc labeling
  • 7964 Crashing Stamping Feature
  • 7915 Double-Click arc group crash
  • 7933 Coverage created from scatter boundary has issues

2D Mesh

  • 8023 snapping elements not correct
  • 7918 Z direction of multiple meshes flips
  • 7940 BC lost when editing mesh subset
  • 7985 Certain BC not available when exactly two nodestrings selected
  • 7941 Crash refining elements
  • 7944 Nodal BC symbols not showing up unless the nodes are also displayed

Scatter

  • 7955 Deleting scatter point converts dataset to Z
  • 7937 Trimming a scatter set destroys the data values (only 1 dataset)

Simulation

  • 7952 Renaming Mesh doesn't update name in simulation link

SRH-2D

  • 8016 SRH-2D Duplicate Coverage Errors
  • 7999 The SRH-2D DMI writes multiple pressure cards in srhhydro file incorrectly
  • 7973 SRH BC not displayed
  • 7974 SRH Geometry Nodestrings not written correctly for SRH Model
  • 7966 SRH Project in 11.2 doesn't read correctly into 12.0
  • 7957 Opening saved SRH-2D project creates duplicate datasets.
  • 7950 Model Check for SRH says there is no mesh
  • 7889 Attempting to Open a SRH-2D Causes a Crash

STWAVE

  • 7784 STWAVE Numeric Model Crashes Midway Through Running
  • 7378 STWAVE Tutorial Crash
  • 7199 STWAVE Crash when Use time steps is specified

TUFLOW-FV

  • 7925 Can't run TUFLOW-FV from SMS
  • 7924 Can't read TUFLOW FV Vector Solution

Older Bugfixes

For older versions of SMS that are no longer actively supported, see the individual bugfix articles:

Bugfix Article Release Notes
Bugfixes SMS 10.0 SMS 10.0 Intermediate Release
Bugfixes SMS 10.1 SMS 10.1 Intermediate Release
Bugfixes SMS 11.0 SMS 11.0 Intermediate Release
Bugfixes SMS 11.1 SMS 11.1 Intermediate Release
Bugfixes SMS 11.2 SMS 11.2 Intermediate Release

Related Topics