SMS:Release Notes SMS 10.0: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(No difference)

Revision as of 16:56, 27 July 2009

See Downloads or visit the Aquaveo download page to obtain the latest version of SMS.

Intermediate release SMS 10.0.11 - February 10, 2009

  • Fixed a merge meshes crash
  • Fixed a problem with RMA2 Marsh Porosity where all of the data was not being saved
  • Fixed a problem with ADCIRC weirs
  • Fixed a problem with zonal classification
  • Fixed a crash in converting GIS shapefiles to feature objects
  • Fixed a problem where RMA2 steering it always reports 0.0% of target

Intermediate release SMS 10.0.10 - December 10, 2008

  • Fixed a crash with converting Shapefiles (GIS) to Feature objects (Map module)
  • Fixed a problem where Shapefile->Map created additional arcs
  • Material Assignments to elements mixed up
  • Fixed a problem with initial values not initializing correctly in the vector to scalar dialog
  • Fixed a crash when opening sms or fpr file
  • Fixed a problem where renaming an arc incorrectly closed a profile plot
  • Fixed a problem where image pyramids were sometimes not setup correctly for large images
  • Fixed a problem where SMS sometimes hung when doing a delete all command
  • Fixed a problem where ADCIRC spatial attributes were not being seeded correctly from the specified dataset
  • Fixed a problem where ADCIRC spatial attributes were not using the default values which caused larger files to be written then were necessary
  • Fixed a problem where reading a partially complete ADCIRC solution was completely aborted rather than reading valid timesteps

Intermediate release SMS 10.0.9 - November 4, 2008

  • Fixed a crash with the material properties for generic model interface
  • Fixed a problem with contour labels showing incorrect values
  • Fixed a problem with the controls to adjust the size of the contour legend
  • Fixed a crash with cleaning really complicated map coverages
  • Fixed a crash with opening project files with plots that have incomplete data
  • Fixed a crash with zonal classification feature
  • Fixed a crash that occurred when moving SMS between monitors when using multiple displays
  • Fixed a crash with the FESWMS global bed control
  • Fixed a problem with demo mode that prevented the user from panning or zooming correctly
  • Fixed a problem with using the virtual earth locator to download teraserver images

Intermediate release SMS 10.0.8 - October 6, 2008

  • Fixed a problem with merging cartesian grid rows and columns
  • Fixed a problem where generating cellstrings along boundary produced overlapping strings

Intermediate release SMS 10.0.7 - August 29, 2008

  • SMS now correctly writes the viscosity data to the appropriate input files
  • Fixed a problem with RMA4 nodestrings with midside nodes
  • Changed find by node ID so that the red circle stays around longer
  • Fixed a crash relating to flux plots
  • Fixed a crash that occured when reading certain project files
  • Fixed a crash relating to boundary conditions with the Generic 2D Mesh Model
  • Fixed a crash that occured when running FESWMS
  • Fixed a problem with an improper wave angle written out when steering with CMS-Wave
  • Fixed a problem with specify input paths for PTM hydrodynamics
  • Fixed a crash when selecting a cell in a grid with no elevation dataset
  • Fixed a problem where the BOUSS2D Wave generator arrow was displayed in the wrong direction
  • Fixed a crash that occured when reading an ADCIRC fort.61 file
  • Fixed a crash that occured when observation coverages were deleted before their associated plots
  • Fixed a problem with converting Cartesian Grid coordinates
  • Fixed so the selection highlighting is done correctly when using the Cartesian Grid Find Cell command.
  • Fixed a crash after deleting materials from the CGWave materials dialog
  • Updated the PTM executable so it will work with hardware locks
  • Fixed a crash when using nested STWAVE grids
  • Fixed a crash that occured when you tried to read in scattered data when the scatter module is not enabled
  • Fixed a crash when reading incomplete FESWMS .sed files
  • Changed SMS to not report PTM warnings for "Mapping Output Interval" if mapping output is turned off
  • You will no longer be prompted to save twice when working with STWAVE
  • SMS now treats ADCIRC fort.73 and fort.74 files correctly in the model control tab
  • Fixed a crash with some RMA4 project files
  • Fixed problems with exporting multiple timesteps into a tabular data file
  • Fixed a problem with functional surfaces not displaying correctly after changing the display options.
  • Fixed an endless loop when trying to create "multiple view" filmloops

Intermediate release SMS 10.0.6 - July 15, 2008

  • A problem with the display getting fouled up after changing the z-mag until the next frame command has been fixed
  • Fixed crash when trying to assign ADCIRC weirs to nodestrings with different numbers of nodes
  • SMS now correctly uses external files specified in the TUFLOW grid options dialog
  • Fixed a problem where invalid material references could be created when using the generic model interface
  • Fixed a crash that happened on certain computers when saving scatter sets as TINs
  • Fixed a problem with the tutorial files for the generic model interface
  • Fixed a crash with multiple view filmloops
  • Inverting cell selection with Cartesian Grids now works correctly
  • Select Cartesian Grid cells by data value has been fixed
  • The node ordering for boundaries and forcing files has been made consistent
  • STWAVE now runs multiple events from SMS
  • The display will now update correctly after changing a nodes x, y coordinates
  • Fixed a crash with observation fluxes
  • Fixed a problem with observation attribute names for arcs when using both nodes and arcs
  • Scatter edges now display correctly when panning after swapping edges
  • The display now updates correctly after reversing the direction of a feature arc
  • Fixed a crash with zonal classification if you enter the dialog with zones defined that don’t have any criteria
  • Fixed Ctrl+ key shortcuts to match the descriptions in the menu
  • When mapping an elevation dataset the correct name is now used
  • Fixed a problem saving TUFLOW event data
  • Select by material type now refreshes appropriately
  • Fixed select by dataset value for nodes
  • Fixed a crash with certain FESWMS sed files
  • Fixed a crash that occurred sometimes when loading a DEM from an asc file
  • Fixed a crash that occurred with Cartesian Grid functional surfaces and ATI graphics cards
  • Modified the Scatter Contour -> Feature dialog to work more cleanly
  • Fixed a crash that occurred with reading some ADCIRC datasets
  • Fixed creating cell strings for PTM from CMS-Flow

Intermediate release SMS 10.0.5 - June 20, 2008

  • Fixed a problem with SMS accessing deleted temporary files.
  • Fixed a crash with trying to access plot data after deleting feature arcs.
  • Bouss-2D wave maker images now appear right side up.
  • Fixed a crash with deleting nodes with nodal boundary conditions being displayed.
  • Fixed a problem with creating PTM input data from an RMA2 solution.
  • Fixed a crash that sometimes occured when smoothing size datasets in the mesh module.
  • Fixed a problem with reading RMA2 mesh and solution files that have gaps in the node ids.
  • Fixed a crash that occured when deleting improperly created Cartesian grid cell strings.
  • Fixed a crash with exporting tabular data.
  • We now give an explanation message if we cannot create a nautical grid.
  • Fixed a problem where sometimes multiple scalar and vector datasets could appear active.
  • SMS now updates the time window when datasets are referenced to a specific timeframe.
  • Fixed a problem where SMS doesn't terminate on exit if a solution dataset has no valid values.
  • Coordinate transforms are now applied to all the grids and not just the active grid.
  • Fixed a meshing crash that sometimes happened with scalar density paving.
  • SMS now writes the TUFLOW initial water level value in the tgc file so it can be overriden by water level polygons.
  • SMS now writes the STWAVE nesting cells correctly.
  • Fixed a problem where it was necessary to launch STWAVE twice before it would run successfully.
  • Fixed a problem with Bouss2D probe dialog.
  • SMS now saves the Cartesian Grid arc options.
  • Changed the output format of the CMS Wave energy file to ensure proper spacing between numbers.
  • The Refine point dialog now uses I and J rather than U and V to be consistent with other parts of the interface.
  • SMS now handles the TUFLOW external grid file correctly.
  • Trying to assign weirs to nodestrings of different numbers of nodes no longer crashes.
  • Fixed a problem with changing the z-magnification that broke the display until the next frame occured.

Intermediate release SMS 10.0.4 - June 11, 2008

  • Mesh contours will now display correctly when there are timesteps that are completely dry
  • Fixed a CMS-Flow, CMS-Wave steering crash
  • Fixed a crash that occured when creating arrowheads using the map draw tools
  • Fixed GIS to Coverage when using a TUFLOW network coverage
  • The profile plot now updates when adding and removing arcs from arc groups
  • Map nodes were drawn in their old location after being dragged to a new location
  • Arcs would sometimes disappear behind transparent contours
  • The origin of observation arcs now save with map files
  • Default stamp elevation for feature stamping is now used correctly
  • Newly created coverages are now active in the project explorer
  • Transparency for Cartesian Grid functional surfaces has been fixed
  • Color filled and linear contours now appear at the same z elevation for Cartesian Grids
  • Naming observation arcs no longer cause a crash
  • Fixed a nodestring display update issue
  • Fixed a crash reading shape files
  • PTM post processing datasets are now saved with the project
  • Triple clicking the same point when creating an arc no longer causes a crash
  • Having multiple CMS Flow grids with cellstrings no longer causes bad cellstrings
  • Trying to save a scatter set to a read only file no longer crashes SMS
  • SMS again allows users to drag files onto the icon to open them
  • An issue with the timestep window not showing up when using PTM has been fixed
  • Fixed a crash when deleting points used by an observation plot
  • There were times when newly created scatter points were not added to the triangulation. This has been fixed.
  • At times SMS would hang when optimizing the triangulation
  • Contour labels are no longer cut off by color filled contours
  • Fixed a selection problem with scatter vertices by when using a polygon
  • Some DEM files were not reading in correctly but they do now
  • TUFLOW 1D Flow vs WSE boundary conditions were not be written to the TUFLOW files correctly
  • The get info dialog for meshes no longer reports information from unused models
  • Fixed the DEM import dialog so that the feedback is correct and makes sense
  • Fixed a problem with display updates when assigning flowrate boundary conditions
  • Functional surfaces now frame correctly
  • The screen refreshes correctly when interpolating between nodes
  • It is now always possible to exit selecting with a box by using the escape key
  • Fixed a crash that occurred when copy a coverage with selected entities
  • Removed excess information from the zonal classification logs
  • Fixed a crash when reading an invalid RMA2 solution
  • SMS now stores Bouss2D grids the right size and with the correct indices
  • Fixed some problems with Bouss2D probes
  • SMS now displays coverages in the correct order
  • Fixed a problem where multiple CGrids sometimes displayed
  • Fixed 1D element contours
  • Fixed problems with grid frames (dragging, deleting, and copying)
  • Fixed a problem with 1D element node updates
  • Coastline files can be created even if you don't have CGWave enabled
  • Fixed a crash with deleting cell strings

Intermediate release SMS 10.0.3 - May 1, 2008

  • PTM executable updated to version 2.025
  • Saving out coastline file available if CGWAVE or ADCIRC is enabled
  • ADCIRC 63/64 file crash
  • Slow deletion of feature points
  • STWAVE coverage issue specifying land polygons
  • GIS to Feature data crash
  • Generic model interface - global parameter definition bug
  • Import wizard problem where z elevations not properly mapped to feature points
  • Fixed multiple views film-loop
  • GIS to Map for TUFLOW network coverage fixed
  • Relocated map node displayed at old location until refresh
  • Origin of observation arc is now saved in the map file
  • Cartesian grid Color fill and linear contours are now displayed at consistent elevations to improve visualizing them in 3D
  • Name observation arc crash
  • Nodestring display issue
  • Fixed create arc tool crash
  • Editing scatter points and overwriting HDF5 file problem
  • Crash when deleting feature points in specific situations

Intermediate release SMS 10.0.2 - March 14, 2008

  • Crash when performing change/delete when triangles selected
  • Print preview not functioning
  • Scale legend does print correctly
  • Text and drawing objects not printing correctly
  • Transform feature objects was not working for PTM coverages
  • STWAVE Boundary conditions types not saved correctly

Intermediate release SMS 10.0.1 - February 19, 2008

  • Fixed the inability to select Southern hemisphere UTM zones
  • Fixed several graphical glitches including texture mapping on a surface and several update problems
  • Fixed various problems with the spectral energy dialog
  • Removed misleading messages that originate from the generic model interface
  • Fixed a crash that sometimes occurred when using zonal classification
  • Fixed a problem with PTM traps that was reporting the open/closed state incorrectly
  • Fixed some issues with models that only support metric units
  • Fixed a crash that sometimes occurred when trying to use LTEA
  • Changed STWAVE to write out all datasets by default
  • Fixed coordinate conversions for PTM sources
  • Fixed a bug that sometimes caused poor meshes to be generated

Related Topics