SMS:Release Notes SMS 11.2: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Redirected page to SMS:Bugfixes SMS)
 
m (Protected "SMS:Bugfixes SMS 11.2" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
#REDIRECT [[SMS:Bugfixes SMS]]
{{TOCright}}
The SMS Intermediate Release Bugfixes page for SMS 11.2.
=[[SMS:What's New in SMS 11.2|SMS 11.2 Release]] Bugfixes=
==SMS 11.2.16 - Release March 04, 2016==
*Update for Security in Installer
 
==SMS 11.2.15 - Release November 25, 2015==
*'''ADCIRC'''
**08436 Fixed an Issue where you couldn't run ADCIRC in Parallel
*'''ADH'''
**08439 Crash when setting ADH Initial Conditions
*'''General'''
**08330 Project Explorer Items not updating their display properly
**08329 Image visibility not saved with project
**08331 OK Button Under Other Dialog Items in the Map -> 1D Grid Dialog
 
==SMS 11.2.14 - Release October 22, 2015==
*'''CMS Wave'''
**8389 - CMS-Wave export does not save the "txt" file
**8392 - Save as "CMS-Wave sim" asks for name that it doesn't use
**8391 - CMS-Wave simulation reftime is defaulted incorrectly
*'''General'''
**8331 - OK Button Under Other Dialog Items in the Map -> 1D Grid Dialog
**8398 - Synthetic storm dialog does not have the correct icon in the dialog title bar
*'''GIS'''
**8316 - When opening a *_message.mif file into the GIS module, the font color cannot be changed
*'''Grids'''
**8378 - CMS-Wave Spec file has wrong value for Hs
*'''Materials'''
**8257 - Materials Data Loss
*'''Mesh'''
**8399 - Deleted curves keep adding to 2dm file
**8347 - Map->Mesh invalid for area property coverage
**8335 - Reloading a project after deleting a mesh in subset mode in the same SMS session causes problems
**8317 - Crash in Nodestring right-click menu
*'''Project Explorer'''
**8329 - Image visibility not saved with project
*'''Spectral Data'''
**8414 - Click and Drag Box not Showing up for Zoom, and Select in Spectral Energy Dialog
**8387 - SMS prompts for spectral coverage destination not precise
**8380 - Spectral datasets not deleted correctly when editing
 
==SMS 11.2.13 - Release September 22, 2015==
'''BOUSS2D'''
*08214 - STWAVE mentioned in model checker description instead of BOUSS2D
'''CGrid'''
*08228 - Crash Loading Project File
'''Contours'''
*08278 - Functional surface contour dialog name incomplete
'''Datasets'''
*08244 - Name of 'Z' dataset not correct
'''Generic Model'''
*08223 - ADH Hotstart folder created when switching models
'''Mesh'''
*08296 - Global parameters problems in .2dm file
*08280 - SMS doesn't detect the mesh nodes (or the mesh at all)
*08268 - Projection not matching when trying to enter mesh subset edit
*08224 - Incorrect Z Values assigned to nodes when performing Map->2D Mesh
'''NOAA'''
*08270 - Tidal Data commands for the Web menu do nothing
'''Plots'''
*08258 - Profile Plot crash with transient data
'''SRH-2D'''
*08210 - Simple Z lines not writing to the .tgc file
'''Other'''
*08083 - PTM Waves and Breaking Input File Option cannot be removed from the model
*08191 - SMS automatically cycles through time steps of BOUSS2D WSE Animation output dataset
*08201 - STWAVE sim file import does not read projection
*08194 - GenCade coverages lose attributes when merged
*08207 - SMS crashes when loading fort.45.
*08208 - SMS crashes when reopening the current open project.
*08209 - Inlets (Reservoir Model and Jetties) dialog typo (GenCade)
*08188 - SMS crashes when opening multiple files.
 
==SMS 11.2.12 - Release August 4, 2015==
'''ADCIRC'''
*8177 Can't run model in LTEA tutorial
*8104 SMS not creating unit 23 file for ADCIRC
 
'''General'''
*8188 SMS crashes when opening multiple files.
*8108 Can't delete items from project
*8107 Project corrupted after saving
*8130 Deleting Datasets that are changed outside of SMS
*8138 MIF/MID importing errors
*8158 Can't find feature point by ID
*8123 Unnecessary messages during Delete All operation
*8125 Reading in a Materials file with German characters does not read in the German characters.
*8026 When first starting SMS an annoying message about remote desktop appears
 
'''Map'''
*8168 Mesh Generation Toolbox Menu Item
*8159 Creating Arcs changes feature point numbering
 
'''2D Mesh'''
*8099 SMS saves bad mesh after refining elements
 
'''Scatter'''
*8151 Can't merge scatter sets
*8154 Incorrect extracted plot from scatter
*8091 Crash Interpolating Scatter to Mesh
 
'''TIN'''
*8137 Selecting triangles of a TIN causes SMS to crash
 
'''WAM'''
*8061 WAM Model Check not functioning
*8062 WAM Tutorial Model Does Not Run Successfully
 
==SMS 11.2.11 - Release June 16, 2015==
'''ADCIRC'''
*8031 Loading ADCIRC Meshes Causes Multiple Meshes with the Same Name
 
'''CMS'''
*8055 CMS-Flow model check and model wrapper errors
*8068 CMS Model Check and Sediment Datasets
 
'''General'''
*8060 Scale/Printing Issue
*8029 Zoom to Selection Not working when display features are turned off
*8067 Printing crash
*8054 SMS not writing projection card to cmcards file
*8050 Slow vector display
*8048 Plot From Observation Profile Not Appearing In Graph
*8015 projection changes on load
*8008 Incorrect Profile Plot
*7834 Various issues found while working on East End Bay project
 
'''Generic Model'''
*8046 Error Message Appears Stating "No Defined Boundary Condition Options Found For This Entity.
*7991 Generic Mesh Model, can't uncheck Activate parameter group
*7989 Generic Mesh Model does not save parameter group correlation for BC
 
'''2D Grid'''
*7994 Display of Cartesian Grid Data is Incorrect
 
'''Map'''
*7591 Redistribute arc using source/target fails with bias distribution on source
 
'''2D Mesh'''
*8079 Rectangular patch not clearing previous mesh
*8052 Datasets not included in Mesh→Scatter Operation
*8028 Saving Mesh Subsets
*7918 Z direction of multiple meshes flips
 
'''SRH-2D'''
*7468 SRH Restart File Option Not Saving
*8032 SRH Not Outputting at Specified Interval
*7461 SRH Variable WSE tutorial files don't work
*7977 SRH restart file location not saved
 
'''STWAVE'''
*7345 Can't run STWAVE through SMS
 
'''TUFLOW'''
*8072 Changing visibility of CGrid causes errors in TUFLOW
 
==SMS 11.2.10 - Release May 12, 2015==
'''ADCIRC'''
*7917 Single node value not editable for ADCIRC nodal attribute
'''ADH'''
*7961 SMS hangs when opening ADH solution file
'''BOUSS-2D'''
*7885 BOUSS2D not saving the damping grid file (may exist in 11.2 as well)
'''BOUSS Runup'''
*7942 Checkboxes in Runup/Overtopping Model Control Dialog Aren't Being Initialized
'''DMI'''
*7872 DMI output time table crashes when deleting a row
'''General'''
*7981 Projection not set in Reproject dialog
*7979 Cell sizes change with reprojection
*7913 SMS not reading "merged" nodes from the *.map file
*7910 Zoom and Pan Performance Issues
*7901 When ok doesn't mean ok
*7857 Data not saved to h5 file
*7854 Saving Materials Coverage as a Shapefile does not include Material names or IDs
'''Generic Model'''
*7991 Generic Mesh Model, can't uncheck Activate parameter group
*7989 Generic Mesh Model does not save parameter group correlation for BC
'''GIS'''
*7982 SMS Tutorial: GIS
*7871 Shapes → Feature Objects Does not create new coverage
'''2D Grid'''
*7994 Display of Cartesian Grid Data is Incorrect
'''2D Mesh'''
*7985 Certain BC not available when exactly two nodestrings selected
*7918 Z direction of multiple meshes flips
*7863 Merging meshes causes BC to be lost
*7850 SMS Hangs Merging Meshes
*7852 Mesh projection blocks interpolation - late
'''PTM'''
*7851 PTM Model wrapper update
'''Scatter Data'''
*7955 Deleting scatter point converts dataset to Z
*7937 Trimming a scatter set destroys the data values (only 1 dataset)
*7888 Interpolate from scatter to scatter crash
'''SRH-2D'''
*7977 SRH restart file location not saved
*7962 Specified SRH model location doesn't save
*7957 Opening saved SRH-2D project creates duplicate datasets.
*7916 PreSRH2D not running
*7889 Attempting to Open a SRH-2D Causes a Crash
*7859 SRH-2D interface deletes the contents of the HY8 file (creates a blank file) when linking
'''TUFLOW'''
*7925 Can't run TUFLOW-FV from SMS
*7924 Can't read TUFLOW FV Vector Solution
 
==SMS 11.2.9 - Release March 13, 2015==
'''ADCIRC'''
*7813 Crash loading ADCIRC unit 62 file
'''ADH'''
*7757 Pre-ADH Error with ITL and NTL
*7750 Can't delete initial depth folder after converting from ADH  to SRH or other model
'''BOUSS-2D'''
*7804 Incorrect units in BOUSS2D Wavemaker
*7835 SMS Tutorial Error: Listboxes Lack Checkboxes in BOUSS2D Solution View Dialog
*7726 SMS crashes when saving, exporting, and running BOUSS2D
'''CAD'''
*7816 DXF→Map Crash
'''CMS'''
*7693 CMS Project Error and Crash
'''General'''
*7837 Review of help text for menu items
*7827 Plot Wizard with VTK Mesh Crash
*7805 SMS reverts to quadratic elements after using linear elements
*7815 Convert Observation Points to Scatter Not Available
*7814 Dummy Observation Points Set Incorrectly for Fort.62
*7795 Contour range values not initialized correctly
*7780 Duplicate Initial Depth Dataset
*7786 Project File Crashes SMS
*7766 Warning Window Constantly Popping Up About Contours Legend Box
*7752 Contour options checked and changed when they are not on - causes annoyance and slow down
*7723 Display of Project Explorer tree toggles not correct
*7729 File | Save crashes SMS
*7705 Gap in vector display
*7716 Attempting to Open .sol File Without Opening a Project First Causes SMS to Crash
*7623 Plot window film loop broken
'''Generic Model'''
*7787 11.2 - Opening 2dm File Sets the Incorrect Value for Parameter
*7769 Opening Project Has Issue With Generic Mesh Template
*7754 Default "Generic Model Definition" gets created and is in the way
*7753 Generic Model Coverages can become corrupted on read of "map" file.
*7722 Generic template not saved to new folder
*7687 Material Properties not saved in generic model
'''GIS'''
*7808 GIS to Feature Objects Wizard Closes Without Ever Going to Step 2
*7809 Not Selecting a Coverage type In the GIS to Feature Objects Wizard Causes a Crash
'''Map'''
*7781 SMS Hangs when cleaning feature objects
*7745 Offset arc elevation is set to 0.0
*7741 Merging coverages does not maintain elevation of arcs
*7704 Build Polygon command alters material type for some existing polygons
'''2D Mesh'''
*7817 Merge Mesh Crash
*7800 Nodestrings Not Updating Projection
*7751 Message about mesh being out of date is not accurate
*7696 Unable to delete VTK mesh dataset
*7548 Merging Overlapping Meshes Causes Geometry Problems
'''PTM'''
*7770 SMS Not Saving Particle Data Simulation
'''Scatter Data'''
*7740 Conversion from selected vertices to scatter points not working
'''Spectral Energy'''
*7768 Spectral Energy Angle Bin Size
*7785 SMS Doesn't Save Reference Time When Importing Spectral Data
'''SRH-2D'''
*7715 Model Check Not Running Before Exporting and/or Launching SRH-2D
*7695 Can't use Intl Feet for SRH
 
==SMS 11.2.8 - Release January 19, 2015==
'''CMS'''
*7656 CMS-Wave model control issues
*7646 Can't set number of digits for CMS-Wave date/times
*7644 cms flow save points cell id not correct when exporting
'''General'''
*7665 Units/Projection Mixed-Up
*7496 Dataset standard deviation is wrong
*7621 View is modified and the z direction flips
*7633 Displaying wrong mannings N value
*7632 Monitor points not shown
*7326 Freeze assigning BC
*7617 Display projection set funny
*7558 Crash Reading in BC File
'''Generic Model'''
*7687 Material Properties not saved in Generic Model
*7620 Extra "mesh" folder and 2dm file created
*7592 Map files with generic model data not handled correctly
'''2D Grid'''
*7622 Grid frames displayed double
*7619 Z-mag for cgrid appears wrong
'''Map'''
*7704 Build Polygon Command Alters Material Type for Some Existing Polygons
'''2D Mesh'''
*7548 Merging Overlapping Meshes Causes Geometry Problems
*7660 Nodestring Interal Error
*7645 quadratic mesh nodes aren't flagged as midside when re-loaded in Sms
'''Raster'''
*7618 Interpolate from Raster to Mesh Subset
'''RiverFlo-2D'''
*7682 SMS assigns all mesh nodes same XYZ coordinate when running RiverFlo-2D with v11.2 template
*7657 Can't run Generic Models RiverFlo-2D after loading solution
'''Scatter Data'''
*7547 Create Mesh Quality Scatter Set Popup Item Causes SMS to Crash
*7636 Can't save scatter file
*7624 Merging Scatter Sets Crash
*7625 Contours not updating after triangulation is changed
*7641 scalar value not updated
*7627 Scatter Merge priority lost when selecting maintain triangulation
*7626 Crash when merging scatter sets
*7635 Holes in scatter triangulation
'''SRH-2D'''
*7695 Can't Use Intl Feet for SRH-2D
*7467 Right-clicking on an SRH-2D coverage can give access to other coverage attributes
'''STWAVE'''
*7668 STWAVE coordinate system not written out correctly
 
==SMS 11.2.7 - Release Novemeber 13, 2014==
'''DMI'''
* 7476 Crash when double-clicking in DMI coverage
* 7538 Crash when displaying materials on a duplicated mesh in DMI
'''General'''
* 7481 Projection not saved for a default coverage with no data
* 7485 Bad projection after prompt to reproject
* 7497 Projection error in log when the projection should just change
* 7509 Work in object projection function causes scatter set to disappear
* 7532 Flowtrace from single timestep of a transient dataset fails to generate animation
* 7533 Sample timesteps from a transient dataset in the Dataset Toolbox allows 0.0 time step resulting in infinite loop
* 7557 Opening project file (.sms) gives projection messages it shouldn't
'''Generic Model'''
* 7525 Generic Model BC Group Classifications not preserved
* 7526 Model specific data saved into the Generic Model Template
* 7527 Generic Model reuses the curves of a material type
* 7528 switching to generic model should also prompt for model (if more than 1)
* 7529 duplicating a generic model mesh should also duplicate its boundary conditions
* 7549 Generic Model Toggle writing out GP VAL wrong
* 7550 generic model multiple material groups not working
'''Map'''
* 7377 Offset arcs function not functioning correctly
* 7486 Rectangular Patch Crash
* 7487 Merging meshes creates overlapping elements
* 7563 SMS 11.2 Crash on showing polygon fill when coverage has no materials
'''2D Mesh'''
* 7442 Extract Weir Elevations for selected nodestring crashes and is unclear as to purpose
* 7517 Slow mesh merge
* 7519 loss of boundary conditions in mesh merge
* 7522 Crash Using Linear ↔ Quadratic on Merged Mesh
* 7530 should not allow for template deletion if it is in use by a mesh
* 7541 switch current model should always be enabled and new right-click command to create new mesh
* 7571 Rips occur when deleting nodes and retriangulating voids is on
'''SRH-2D'''
* 7477 SRH-2D *.srhmat file for a copied mesh(simulation) has no materials
* 7484 SRH material properties are scrambled when building polygons
* 7493 SRH-2D (Dynamic Model) display text not changing to specified settings
* 7554 SRH-2D material file is written wrong when material polygons with holes exist
'''TUFLOW'''
* 7218 TUFLOW AD BC values don't save
 
==SMS 11.2.6 - Release October 3, 2014==
'''ADCIRC'''
*7437 ADCIRC File Save Error
'''BOUSS-2D'''
*7414 Saving BOUSS2D Native Files Not WOrking for Second Simulation
*7472 Reading a BOUSS2D simulation results in a bad damping cellstring
'''General'''
*7334 Incorrect Checkbox Display in Project Explorer
*7406 Nodestrings from Model Native Files are Corrupted
*7415 Unable to Interpolate between Two Nodes
*7407 H5 Gets Saved with Bad Connectivity
*7445 Unable to Read in H5 File
*7427 SMS files with no projection have mismatch problem
*7433 Reproject all Does Not Change Display Projection
*7428 If a New Project is Read in, The Projection is set before the old data is check on or cleared out
*7439 Projection not set with "extra.h5" file when it should be
*7379 Simulation Icon Problem
'''GIS'''
*7479 Mapping GIS to Features takes hours
'''Map'''
*7458 Cannot Reproject Grid Frame In Coverage
'''2D Mesh'''
*7403 Merging Meshes Crash
*7444 Nodes in Mesh that lie on Boundary of a Feature Arc are Selected When Boundary is Out Flag is on
*7430 Mesh has odd projection
*7460 Hang/Crash merging meshes
'''Raster'''
*7474 Projection issues with raster
'''SRH-2D'''
*7465 The arcs of an SRH-2D Materials coverage are not displayed
*7470 Import SRHHyrdro File Doesn't Import Mannings N for Materials
*7471 Import SRHHydro File Has Issues with Exporting and Boundary Conditions
'''TUFLOW'''
*7332 SMS crashes when loading in TUFLOW .sup file and changing display options
 
==SMS 11.2.5 - Release September 8, 2014==
'''FESWMS'''
*7270 FESWMS projection units not read in correctly
'''General'''
*7366 SMS doesn't read the files associated with a B2D Project quite right
*7375 Zoom to selection does not function as expected
*7344 SMS saves out vector dataset in two locations
*7347 Project Tree Missing Items after Reading in Project
*7333 Crash opening Map file
*7322 Open Project Crash
'''Generic Model'''
*7339 Command to delete a generic model definition not in 11.2
'''Map'''
*7327 SMS Polygon Attributes Dimmed when they should be active
'''2D Mesh'''
*7329 Bad mesh boundary from Map → 2D Mesh
*7398 Merge meshes results in bad mesh
*7330 Can't merge meshes
'''Scatter Data'''
*7368 Can't Triangulate Scatter Sets
'''SRH-2D'''
*7338 Assigning materials from an SRH-2D materials coverage to an SRH-2D mesh allows bad option - crash
*7337 SRH-2D time series curve file has extra lines that cause SRH-Pre to fail
*7318 Dragging SRH coverage into a Map Module Folder hangs
 
==SMS 11.2.4 - Release August 13, 2014==
'''FESWMS'''
*7271 Fixed Loading FESWMS solution corrupts ceiling dataset
'''General'''
*7290 FixedDiscrepancies in the Wet Area displayed in the Echo Window and the Status Bar
*7288 Fixed Selection Echo Window not displaying history
*7286 Fixed duplicate datasets after running model
*7280 Fixed a Time Series Issue
'''Map'''
*7284 Fixed creating material property coverage activates additional coverage type
*7325 Fixed a Crash when Editing Arc Attributes
*7249 Fixed a Build Polygons Failure
*7241 Fixed Interpolation for Map→2D Grid
*7266 Fixed an Issue where Scatter Contour Display was not Updating when Deleting Triangles
'''2D Mesh'''
*7289 Fixed Error "No mesh exists" when there is a mesh
*7291 Fixed Nodestring Info not showing in the Selection Echo Window
*7256 Fixed a Problem with Delete with all nodes selected on a Mesh
*7265 Fixed the Distance between mesh nodes calculator
'''Scatter Data'''
*7235 Fixed a Problem with Scatter Triangle and Contour Display not updating
'''SRH-2D'''
*7202 Fixed a problem with an SRH Error finding .dat file
*7212 Fixed an SRH-2d Pre fail when reading a rating curve boundary
 
==SMS 11.2.3 - Release July 15, 2014==
'''ADCIRC'''
#Fixed a problem where ADCIRC elevation forcing time interval
 
'''CMS'''
#Fixed a problem where CMS-WAVE Telescoping Grid were Unable to Read Vector Data
 
'''General'''
#Fixed a problem where Contour label options are always labeled as meters
#Fixed Unexpected End of File When Reading in Project
#Fixed a Resample timestep error
#Fixed a problem where Saving display projection in "save settings" doesn't always work
#Fixed a problem where Opening the same *.atcf file two times does not create distinct coverages
 
'''2D Grid'''
#Fixed Interpolating CGrid vector data to scatter
 
'''Images/GIS'''
#Fixed a problem where Static Image not linked to the project file
 
'''PTM'''
#Fixed a problem where Can't open large PTM *.h5 file
 
'''Scatter'''
#Fixed a problem where Scatter→Mesh Activity not mapped
 
'''SRH-2D'''
#Fixed SRH-2D Error in finding HDF5 file
#Fixed a problem where Global renumber of SRH-2D ugrid scrambles material assignments
 
'''TUFLOW'''
#Fixed a problem where TUFLOW AD BCs disappear
 
==SMS 11.2.2 - Release June 02, 2014==
This is a version release for SMS 11.2
 
'''CMS'''
#Fixed a Problem where CMS-WAVE Telescoping Grid Unable to Read Vector Data
#Fixed a Problem where Saving CMS-Wave Project Incomplete
 
'''General'''
#Fixed a Problem where Contour label options are always labeled as meters
#Fixed a Problem where Deleted disjoint nodes don't go away
#Fixed a Crash when Extracting datasets in the Assign BC dialog
#Fixed a issue where Dragging a project into SMS during start up causes problems
 
'''Images/GIS'''
#Fixed a Problem where Static Image not linked to the project file
 
'''2D Mesh'''
#Fixed a Crash when clicking 'OK' in Rectangular Patch Options
#Fixed a Problem where No Materials Data dialog for generic mesh elements. (11.2 32 bit)
#Fixed Mesh → Scatter Crash
 
'''SRH-2D'''
#Fixed a Problem where SRH-2D Error in finding HDF5 file
 
'''TUFLOW'''
#Fixed TUFLOW Active/Inactive Cell Display Confusion
#Fixed a Problem with cell-by-cell activity in TUFLOW
 
 
{{Template:Navbox SMS}}
[[Category:SMS General Information]]
[[Category:What's New]]
[[Category:Bugfixes|SMS]]
[[Category:Archived]]

Revision as of 15:54, 11 January 2017


The SMS Intermediate Release Bugfixes page for SMS 11.2.

SMS 11.2 Release Bugfixes

SMS 11.2.16 - Release March 04, 2016

  • Update for Security in Installer

SMS 11.2.15 - Release November 25, 2015

  • ADCIRC
    • 08436 Fixed an Issue where you couldn't run ADCIRC in Parallel
  • ADH
    • 08439 Crash when setting ADH Initial Conditions
  • General
    • 08330 Project Explorer Items not updating their display properly
    • 08329 Image visibility not saved with project
    • 08331 OK Button Under Other Dialog Items in the Map -> 1D Grid Dialog

SMS 11.2.14 - Release October 22, 2015

  • CMS Wave
    • 8389 - CMS-Wave export does not save the "txt" file
    • 8392 - Save as "CMS-Wave sim" asks for name that it doesn't use
    • 8391 - CMS-Wave simulation reftime is defaulted incorrectly
  • General
    • 8331 - OK Button Under Other Dialog Items in the Map -> 1D Grid Dialog
    • 8398 - Synthetic storm dialog does not have the correct icon in the dialog title bar
  • GIS
    • 8316 - When opening a *_message.mif file into the GIS module, the font color cannot be changed
  • Grids
    • 8378 - CMS-Wave Spec file has wrong value for Hs
  • Materials
    • 8257 - Materials Data Loss
  • Mesh
    • 8399 - Deleted curves keep adding to 2dm file
    • 8347 - Map->Mesh invalid for area property coverage
    • 8335 - Reloading a project after deleting a mesh in subset mode in the same SMS session causes problems
    • 8317 - Crash in Nodestring right-click menu
  • Project Explorer
    • 8329 - Image visibility not saved with project
  • Spectral Data
    • 8414 - Click and Drag Box not Showing up for Zoom, and Select in Spectral Energy Dialog
    • 8387 - SMS prompts for spectral coverage destination not precise
    • 8380 - Spectral datasets not deleted correctly when editing

SMS 11.2.13 - Release September 22, 2015

BOUSS2D

  • 08214 - STWAVE mentioned in model checker description instead of BOUSS2D

CGrid

  • 08228 - Crash Loading Project File

Contours

  • 08278 - Functional surface contour dialog name incomplete

Datasets

  • 08244 - Name of 'Z' dataset not correct

Generic Model

  • 08223 - ADH Hotstart folder created when switching models

Mesh

  • 08296 - Global parameters problems in .2dm file
  • 08280 - SMS doesn't detect the mesh nodes (or the mesh at all)
  • 08268 - Projection not matching when trying to enter mesh subset edit
  • 08224 - Incorrect Z Values assigned to nodes when performing Map->2D Mesh

NOAA

  • 08270 - Tidal Data commands for the Web menu do nothing

Plots

  • 08258 - Profile Plot crash with transient data

SRH-2D

  • 08210 - Simple Z lines not writing to the .tgc file

Other

  • 08083 - PTM Waves and Breaking Input File Option cannot be removed from the model
  • 08191 - SMS automatically cycles through time steps of BOUSS2D WSE Animation output dataset
  • 08201 - STWAVE sim file import does not read projection
  • 08194 - GenCade coverages lose attributes when merged
  • 08207 - SMS crashes when loading fort.45.
  • 08208 - SMS crashes when reopening the current open project.
  • 08209 - Inlets (Reservoir Model and Jetties) dialog typo (GenCade)
  • 08188 - SMS crashes when opening multiple files.

SMS 11.2.12 - Release August 4, 2015

ADCIRC

  • 8177 Can't run model in LTEA tutorial
  • 8104 SMS not creating unit 23 file for ADCIRC

General

  • 8188 SMS crashes when opening multiple files.
  • 8108 Can't delete items from project
  • 8107 Project corrupted after saving
  • 8130 Deleting Datasets that are changed outside of SMS
  • 8138 MIF/MID importing errors
  • 8158 Can't find feature point by ID
  • 8123 Unnecessary messages during Delete All operation
  • 8125 Reading in a Materials file with German characters does not read in the German characters.
  • 8026 When first starting SMS an annoying message about remote desktop appears

Map

  • 8168 Mesh Generation Toolbox Menu Item
  • 8159 Creating Arcs changes feature point numbering

2D Mesh

  • 8099 SMS saves bad mesh after refining elements

Scatter

  • 8151 Can't merge scatter sets
  • 8154 Incorrect extracted plot from scatter
  • 8091 Crash Interpolating Scatter to Mesh

TIN

  • 8137 Selecting triangles of a TIN causes SMS to crash

WAM

  • 8061 WAM Model Check not functioning
  • 8062 WAM Tutorial Model Does Not Run Successfully

SMS 11.2.11 - Release June 16, 2015

ADCIRC

  • 8031 Loading ADCIRC Meshes Causes Multiple Meshes with the Same Name

CMS

  • 8055 CMS-Flow model check and model wrapper errors
  • 8068 CMS Model Check and Sediment Datasets

General

  • 8060 Scale/Printing Issue
  • 8029 Zoom to Selection Not working when display features are turned off
  • 8067 Printing crash
  • 8054 SMS not writing projection card to cmcards file
  • 8050 Slow vector display
  • 8048 Plot From Observation Profile Not Appearing In Graph
  • 8015 projection changes on load
  • 8008 Incorrect Profile Plot
  • 7834 Various issues found while working on East End Bay project

Generic Model

  • 8046 Error Message Appears Stating "No Defined Boundary Condition Options Found For This Entity.
  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect

Map

  • 7591 Redistribute arc using source/target fails with bias distribution on source

2D Mesh

  • 8079 Rectangular patch not clearing previous mesh
  • 8052 Datasets not included in Mesh→Scatter Operation
  • 8028 Saving Mesh Subsets
  • 7918 Z direction of multiple meshes flips

SRH-2D

  • 7468 SRH Restart File Option Not Saving
  • 8032 SRH Not Outputting at Specified Interval
  • 7461 SRH Variable WSE tutorial files don't work
  • 7977 SRH restart file location not saved

STWAVE

  • 7345 Can't run STWAVE through SMS

TUFLOW

  • 8072 Changing visibility of CGrid causes errors in TUFLOW

SMS 11.2.10 - Release May 12, 2015

ADCIRC

  • 7917 Single node value not editable for ADCIRC nodal attribute

ADH

  • 7961 SMS hangs when opening ADH solution file

BOUSS-2D

  • 7885 BOUSS2D not saving the damping grid file (may exist in 11.2 as well)

BOUSS Runup

  • 7942 Checkboxes in Runup/Overtopping Model Control Dialog Aren't Being Initialized

DMI

  • 7872 DMI output time table crashes when deleting a row

General

  • 7981 Projection not set in Reproject dialog
  • 7979 Cell sizes change with reprojection
  • 7913 SMS not reading "merged" nodes from the *.map file
  • 7910 Zoom and Pan Performance Issues
  • 7901 When ok doesn't mean ok
  • 7857 Data not saved to h5 file
  • 7854 Saving Materials Coverage as a Shapefile does not include Material names or IDs

Generic Model

  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

GIS

  • 7982 SMS Tutorial: GIS
  • 7871 Shapes → Feature Objects Does not create new coverage

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect

2D Mesh

  • 7985 Certain BC not available when exactly two nodestrings selected
  • 7918 Z direction of multiple meshes flips
  • 7863 Merging meshes causes BC to be lost
  • 7850 SMS Hangs Merging Meshes
  • 7852 Mesh projection blocks interpolation - late

PTM

  • 7851 PTM Model wrapper update

Scatter Data

  • 7955 Deleting scatter point converts dataset to Z
  • 7937 Trimming a scatter set destroys the data values (only 1 dataset)
  • 7888 Interpolate from scatter to scatter crash

SRH-2D

  • 7977 SRH restart file location not saved
  • 7962 Specified SRH model location doesn't save
  • 7957 Opening saved SRH-2D project creates duplicate datasets.
  • 7916 PreSRH2D not running
  • 7889 Attempting to Open a SRH-2D Causes a Crash
  • 7859 SRH-2D interface deletes the contents of the HY8 file (creates a blank file) when linking

TUFLOW

  • 7925 Can't run TUFLOW-FV from SMS
  • 7924 Can't read TUFLOW FV Vector Solution

SMS 11.2.9 - Release March 13, 2015

ADCIRC

  • 7813 Crash loading ADCIRC unit 62 file

ADH

  • 7757 Pre-ADH Error with ITL and NTL
  • 7750 Can't delete initial depth folder after converting from ADH to SRH or other model

BOUSS-2D

  • 7804 Incorrect units in BOUSS2D Wavemaker
  • 7835 SMS Tutorial Error: Listboxes Lack Checkboxes in BOUSS2D Solution View Dialog
  • 7726 SMS crashes when saving, exporting, and running BOUSS2D

CAD

  • 7816 DXF→Map Crash

CMS

  • 7693 CMS Project Error and Crash

General

  • 7837 Review of help text for menu items
  • 7827 Plot Wizard with VTK Mesh Crash
  • 7805 SMS reverts to quadratic elements after using linear elements
  • 7815 Convert Observation Points to Scatter Not Available
  • 7814 Dummy Observation Points Set Incorrectly for Fort.62
  • 7795 Contour range values not initialized correctly
  • 7780 Duplicate Initial Depth Dataset
  • 7786 Project File Crashes SMS
  • 7766 Warning Window Constantly Popping Up About Contours Legend Box
  • 7752 Contour options checked and changed when they are not on - causes annoyance and slow down
  • 7723 Display of Project Explorer tree toggles not correct
  • 7729 File | Save crashes SMS
  • 7705 Gap in vector display
  • 7716 Attempting to Open .sol File Without Opening a Project First Causes SMS to Crash
  • 7623 Plot window film loop broken

Generic Model

  • 7787 11.2 - Opening 2dm File Sets the Incorrect Value for Parameter
  • 7769 Opening Project Has Issue With Generic Mesh Template
  • 7754 Default "Generic Model Definition" gets created and is in the way
  • 7753 Generic Model Coverages can become corrupted on read of "map" file.
  • 7722 Generic template not saved to new folder
  • 7687 Material Properties not saved in generic model

GIS

  • 7808 GIS to Feature Objects Wizard Closes Without Ever Going to Step 2
  • 7809 Not Selecting a Coverage type In the GIS to Feature Objects Wizard Causes a Crash

Map

  • 7781 SMS Hangs when cleaning feature objects
  • 7745 Offset arc elevation is set to 0.0
  • 7741 Merging coverages does not maintain elevation of arcs
  • 7704 Build Polygon command alters material type for some existing polygons

2D Mesh

  • 7817 Merge Mesh Crash
  • 7800 Nodestrings Not Updating Projection
  • 7751 Message about mesh being out of date is not accurate
  • 7696 Unable to delete VTK mesh dataset
  • 7548 Merging Overlapping Meshes Causes Geometry Problems

PTM

  • 7770 SMS Not Saving Particle Data Simulation

Scatter Data

  • 7740 Conversion from selected vertices to scatter points not working

Spectral Energy

  • 7768 Spectral Energy Angle Bin Size
  • 7785 SMS Doesn't Save Reference Time When Importing Spectral Data

SRH-2D

  • 7715 Model Check Not Running Before Exporting and/or Launching SRH-2D
  • 7695 Can't use Intl Feet for SRH

SMS 11.2.8 - Release January 19, 2015

CMS

  • 7656 CMS-Wave model control issues
  • 7646 Can't set number of digits for CMS-Wave date/times
  • 7644 cms flow save points cell id not correct when exporting

General

  • 7665 Units/Projection Mixed-Up
  • 7496 Dataset standard deviation is wrong
  • 7621 View is modified and the z direction flips
  • 7633 Displaying wrong mannings N value
  • 7632 Monitor points not shown
  • 7326 Freeze assigning BC
  • 7617 Display projection set funny
  • 7558 Crash Reading in BC File

Generic Model

  • 7687 Material Properties not saved in Generic Model
  • 7620 Extra "mesh" folder and 2dm file created
  • 7592 Map files with generic model data not handled correctly

2D Grid

  • 7622 Grid frames displayed double
  • 7619 Z-mag for cgrid appears wrong

Map

  • 7704 Build Polygon Command Alters Material Type for Some Existing Polygons

2D Mesh

  • 7548 Merging Overlapping Meshes Causes Geometry Problems
  • 7660 Nodestring Interal Error
  • 7645 quadratic mesh nodes aren't flagged as midside when re-loaded in Sms

Raster

  • 7618 Interpolate from Raster to Mesh Subset

RiverFlo-2D

  • 7682 SMS assigns all mesh nodes same XYZ coordinate when running RiverFlo-2D with v11.2 template
  • 7657 Can't run Generic Models RiverFlo-2D after loading solution

Scatter Data

  • 7547 Create Mesh Quality Scatter Set Popup Item Causes SMS to Crash
  • 7636 Can't save scatter file
  • 7624 Merging Scatter Sets Crash
  • 7625 Contours not updating after triangulation is changed
  • 7641 scalar value not updated
  • 7627 Scatter Merge priority lost when selecting maintain triangulation
  • 7626 Crash when merging scatter sets
  • 7635 Holes in scatter triangulation

SRH-2D

  • 7695 Can't Use Intl Feet for SRH-2D
  • 7467 Right-clicking on an SRH-2D coverage can give access to other coverage attributes

STWAVE

  • 7668 STWAVE coordinate system not written out correctly

SMS 11.2.7 - Release Novemeber 13, 2014

DMI

  • 7476 Crash when double-clicking in DMI coverage
  • 7538 Crash when displaying materials on a duplicated mesh in DMI

General

  • 7481 Projection not saved for a default coverage with no data
  • 7485 Bad projection after prompt to reproject
  • 7497 Projection error in log when the projection should just change
  • 7509 Work in object projection function causes scatter set to disappear
  • 7532 Flowtrace from single timestep of a transient dataset fails to generate animation
  • 7533 Sample timesteps from a transient dataset in the Dataset Toolbox allows 0.0 time step resulting in infinite loop
  • 7557 Opening project file (.sms) gives projection messages it shouldn't

Generic Model

  • 7525 Generic Model BC Group Classifications not preserved
  • 7526 Model specific data saved into the Generic Model Template
  • 7527 Generic Model reuses the curves of a material type
  • 7528 switching to generic model should also prompt for model (if more than 1)
  • 7529 duplicating a generic model mesh should also duplicate its boundary conditions
  • 7549 Generic Model Toggle writing out GP VAL wrong
  • 7550 generic model multiple material groups not working

Map

  • 7377 Offset arcs function not functioning correctly
  • 7486 Rectangular Patch Crash
  • 7487 Merging meshes creates overlapping elements
  • 7563 SMS 11.2 Crash on showing polygon fill when coverage has no materials

2D Mesh

  • 7442 Extract Weir Elevations for selected nodestring crashes and is unclear as to purpose
  • 7517 Slow mesh merge
  • 7519 loss of boundary conditions in mesh merge
  • 7522 Crash Using Linear ↔ Quadratic on Merged Mesh
  • 7530 should not allow for template deletion if it is in use by a mesh
  • 7541 switch current model should always be enabled and new right-click command to create new mesh
  • 7571 Rips occur when deleting nodes and retriangulating voids is on

SRH-2D

  • 7477 SRH-2D *.srhmat file for a copied mesh(simulation) has no materials
  • 7484 SRH material properties are scrambled when building polygons
  • 7493 SRH-2D (Dynamic Model) display text not changing to specified settings
  • 7554 SRH-2D material file is written wrong when material polygons with holes exist

TUFLOW

  • 7218 TUFLOW AD BC values don't save

SMS 11.2.6 - Release October 3, 2014

ADCIRC

  • 7437 ADCIRC File Save Error

BOUSS-2D

  • 7414 Saving BOUSS2D Native Files Not WOrking for Second Simulation
  • 7472 Reading a BOUSS2D simulation results in a bad damping cellstring

General

  • 7334 Incorrect Checkbox Display in Project Explorer
  • 7406 Nodestrings from Model Native Files are Corrupted
  • 7415 Unable to Interpolate between Two Nodes
  • 7407 H5 Gets Saved with Bad Connectivity
  • 7445 Unable to Read in H5 File
  • 7427 SMS files with no projection have mismatch problem
  • 7433 Reproject all Does Not Change Display Projection
  • 7428 If a New Project is Read in, The Projection is set before the old data is check on or cleared out
  • 7439 Projection not set with "extra.h5" file when it should be
  • 7379 Simulation Icon Problem

GIS

  • 7479 Mapping GIS to Features takes hours

Map

  • 7458 Cannot Reproject Grid Frame In Coverage

2D Mesh

  • 7403 Merging Meshes Crash
  • 7444 Nodes in Mesh that lie on Boundary of a Feature Arc are Selected When Boundary is Out Flag is on
  • 7430 Mesh has odd projection
  • 7460 Hang/Crash merging meshes

Raster

  • 7474 Projection issues with raster

SRH-2D

  • 7465 The arcs of an SRH-2D Materials coverage are not displayed
  • 7470 Import SRHHyrdro File Doesn't Import Mannings N for Materials
  • 7471 Import SRHHydro File Has Issues with Exporting and Boundary Conditions

TUFLOW

  • 7332 SMS crashes when loading in TUFLOW .sup file and changing display options

SMS 11.2.5 - Release September 8, 2014

FESWMS

  • 7270 FESWMS projection units not read in correctly

General

  • 7366 SMS doesn't read the files associated with a B2D Project quite right
  • 7375 Zoom to selection does not function as expected
  • 7344 SMS saves out vector dataset in two locations
  • 7347 Project Tree Missing Items after Reading in Project
  • 7333 Crash opening Map file
  • 7322 Open Project Crash

Generic Model

  • 7339 Command to delete a generic model definition not in 11.2

Map

  • 7327 SMS Polygon Attributes Dimmed when they should be active

2D Mesh

  • 7329 Bad mesh boundary from Map → 2D Mesh
  • 7398 Merge meshes results in bad mesh
  • 7330 Can't merge meshes

Scatter Data

  • 7368 Can't Triangulate Scatter Sets

SRH-2D

  • 7338 Assigning materials from an SRH-2D materials coverage to an SRH-2D mesh allows bad option - crash
  • 7337 SRH-2D time series curve file has extra lines that cause SRH-Pre to fail
  • 7318 Dragging SRH coverage into a Map Module Folder hangs

SMS 11.2.4 - Release August 13, 2014

FESWMS

  • 7271 Fixed Loading FESWMS solution corrupts ceiling dataset

General

  • 7290 FixedDiscrepancies in the Wet Area displayed in the Echo Window and the Status Bar
  • 7288 Fixed Selection Echo Window not displaying history
  • 7286 Fixed duplicate datasets after running model
  • 7280 Fixed a Time Series Issue

Map

  • 7284 Fixed creating material property coverage activates additional coverage type
  • 7325 Fixed a Crash when Editing Arc Attributes
  • 7249 Fixed a Build Polygons Failure
  • 7241 Fixed Interpolation for Map→2D Grid
  • 7266 Fixed an Issue where Scatter Contour Display was not Updating when Deleting Triangles

2D Mesh

  • 7289 Fixed Error "No mesh exists" when there is a mesh
  • 7291 Fixed Nodestring Info not showing in the Selection Echo Window
  • 7256 Fixed a Problem with Delete with all nodes selected on a Mesh
  • 7265 Fixed the Distance between mesh nodes calculator

Scatter Data

  • 7235 Fixed a Problem with Scatter Triangle and Contour Display not updating

SRH-2D

  • 7202 Fixed a problem with an SRH Error finding .dat file
  • 7212 Fixed an SRH-2d Pre fail when reading a rating curve boundary

SMS 11.2.3 - Release July 15, 2014

ADCIRC

  1. Fixed a problem where ADCIRC elevation forcing time interval

CMS

  1. Fixed a problem where CMS-WAVE Telescoping Grid were Unable to Read Vector Data

General

  1. Fixed a problem where Contour label options are always labeled as meters
  2. Fixed Unexpected End of File When Reading in Project
  3. Fixed a Resample timestep error
  4. Fixed a problem where Saving display projection in "save settings" doesn't always work
  5. Fixed a problem where Opening the same *.atcf file two times does not create distinct coverages

2D Grid

  1. Fixed Interpolating CGrid vector data to scatter

Images/GIS

  1. Fixed a problem where Static Image not linked to the project file

PTM

  1. Fixed a problem where Can't open large PTM *.h5 file

Scatter

  1. Fixed a problem where Scatter→Mesh Activity not mapped

SRH-2D

  1. Fixed SRH-2D Error in finding HDF5 file
  2. Fixed a problem where Global renumber of SRH-2D ugrid scrambles material assignments

TUFLOW

  1. Fixed a problem where TUFLOW AD BCs disappear

SMS 11.2.2 - Release June 02, 2014

This is a version release for SMS 11.2

CMS

  1. Fixed a Problem where CMS-WAVE Telescoping Grid Unable to Read Vector Data
  2. Fixed a Problem where Saving CMS-Wave Project Incomplete

General

  1. Fixed a Problem where Contour label options are always labeled as meters
  2. Fixed a Problem where Deleted disjoint nodes don't go away
  3. Fixed a Crash when Extracting datasets in the Assign BC dialog
  4. Fixed a issue where Dragging a project into SMS during start up causes problems

Images/GIS

  1. Fixed a Problem where Static Image not linked to the project file

2D Mesh

  1. Fixed a Crash when clicking 'OK' in Rectangular Patch Options
  2. Fixed a Problem where No Materials Data dialog for generic mesh elements. (11.2 32 bit)
  3. Fixed Mesh → Scatter Crash

SRH-2D

  1. Fixed a Problem where SRH-2D Error in finding HDF5 file

TUFLOW

  1. Fixed TUFLOW Active/Inactive Cell Display Confusion
  2. Fixed a Problem with cell-by-cell activity in TUFLOW