SMS:HEC-RAS: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 59: Line 59:
  ...
  ...
-->
-->
<!--
==HEC-RAS 1D==
==HEC-RAS 1D==
[[Image:SMS Hec Ras MP.png|thumb|175 px|''HEC-RAS Material Properties'' dialog]]
[[Image:SMS Hec Ras MP.png|thumb|175 px|''HEC-RAS Material Properties'' dialog]]
Line 73: Line 74:
* '''Material Properties''' &ndash; Opens the ''HEC-RAS Material Properties'' dialog. In this dialog, a list of all materials defined in the ''Materials'' dialog will appear. Roughness can be assigned to each material. Also, the property type that is being used for the material values must be specified in the ''HEC-RAS Model Control'' dialog.  
* '''Material Properties''' &ndash; Opens the ''HEC-RAS Material Properties'' dialog. In this dialog, a list of all materials defined in the ''Materials'' dialog will appear. Roughness can be assigned to each material. Also, the property type that is being used for the material values must be specified in the ''HEC-RAS Model Control'' dialog.  
* '''Model Control''' &ndash; Opens the ''HEC-RAS Model Control'' dialog. This dialog allows applying roughness to a cross section databases. A list of available cross section databases will be on the left. On the right, select if roughness will or will not be applied to a database.
* '''Model Control''' &ndash; Opens the ''HEC-RAS Model Control'' dialog. This dialog allows applying roughness to a cross section databases. A list of available cross section databases will be on the left. On the right, select if roughness will or will not be applied to a database.
-->


==HEC-RAS Troubleshooting==
==HEC-RAS Troubleshooting==

Revision as of 19:36, 22 March 2019

The Hydrologic Engineering Center's River Analysis System (HEC-RAS) is a one- and two-dimensional model for computing water surface profiles for steady state or gradually varied flow. HEC-RAS supports networks of channels and is capable of modeling subcritical, supercritical, and mixed flow regime profiles. HEC-RAS is able to model obstructions in the flow path. Two dimensional capabilities were added to HEC-RAS 5.0 in 2016.

Historically, SMS and WMS have supported tools for creating and editing cross sections and attributes for these cross sections for one dimensional HEC-RAS 1D. These cross sections can be imported from the HEC-RAS system in the form of an SDF file (exported by HEC-Ras) and saved as a HEC-GeoRAS file for inclusion into a HEC-RAS project. The WMS package has also developed floodplain mapping tools to generate floodplains from HEC-RAS results.

With the 2D version of HEC-RAS, a new SMS interface to HEC-RAS has been added (starting with SMS 12.2). This new interface is a simulation-based interface that allows defining multiple simulations with individual settings in a single SMS project. All of the mesh generating options supported in the SMS may be used to generate/edit a grid for use in HEC-RAS 2D.

SMS continues to include tools for defining river networks and cross-sections.

The HEC-RAS model can be added to a paid edition of SMS.

HEC-RAS Simulation

Example of a HEC-RAS simulation in the Project Explorer

Starting in SMS 12.2, HEC-RAS uses a simulation process. SMS can run multiple HEC-RAS simulations using the same components. To create a new simulation, right-click in the Project Explorer and select New Simulation | HEC-RAS. Components can then be linked to simulations by dragging the components under the simulation or by right-clicking on the component item and using the Link To submenu.

Components for the HEC-RAS simulation include the following:

  • 2D Mesh

HEC-RAS Simulation Menu

Right-clicking on a HEC-RAS simulation provides a menu with the standard simulation menu commands and the following commands specific to HEC-RAS:

  • Model Check – Launches the model checker to look for problems with the simulation setup.
  • Export HEC-RAS – Exports the mesh geometry so it can be imported into HEC-RAS.

HEC-RAS Files

A HEC-RAS simulation in SMS will generate a number of files for use in the HEC-RAS program. The following files are generated:

  • *.g01 – HEC-RAS geometry file.
  • *.g01.hdf
  • *.prj – The HEC-RAS projection file. For post-processsing, open this file in the HEC-RAS software.
  • *_projection.prj – The projection/coordinate system used by the project in SMS.

HEC-RAS Troubleshooting

Starting in SMS 12.2, HEC-RAS uses the dynamic model interface. If HEC-RAS was purchased through Aquaveo, the DMI file and HEC-RAS library was included in the installation and should be available for use when starting SMS.

Currently, HEC-RAS will encounter a memory error when exporting a mesh that contains more than 500,000 elements.

HEC-RAS does not support voids in a mesh. Be certain to review the mesh for voids, holes, flat elements, and other irregularities before exporting.

Related Topics

External Links