SMS:PTM Files: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Standardized formatting of lists of files for readability)
(→‎Optional files: added file extension)
Line 14: Line 14:


* '''[[SMS:PTM Source File|Sediment source file]]''' – The sediment sources in the simulation.
* '''[[SMS:PTM Source File|Sediment source file]]''' – The sediment sources in the simulation.
* '''[[SMS:PTM Trap File|Trap file]]''' – Locations where information about the simulation should be extracted.
* '''[[SMS:PTM Trap File|Trap file]]''' (*.trap) – Locations where information about the simulation should be extracted.
* '''[[SMS:PTM Wave File|Wave file(s)]]''' – Time varying information about the wave field.
* '''[[SMS:PTM Wave File|Wave file(s)]]''' – Time varying information about the wave field.
* '''Wave breaking file(s)''' – Time varying information about wave breaking.
* '''Wave breaking file(s)''' – Time varying information about wave breaking.

Revision as of 21:10, 29 March 2017

Input and Output files for PTM.

Input Files

Required files

  • Program Control File (*.pcf) – Run time instruction for the model.
  • Mesh file – Bathymetry and boundary information for the model.

PTM Version 1.0 supports ADCIRC compatible three-noded triangular finite element mesh files (fort.14 or .grd). SMS contains tools to convert mesh files to this format.

  • Hydrodynamic input file – Time varying water surface elevation and depth-averaged velocities.

The SMS 9.2 interface to PTM Version 1.0 supports XMDF (*.h5) format hydrodynamic files. SMS contains tools to convert mesh output files to this format.

Optional files

  • Sediment source file – The sediment sources in the simulation.
  • Trap file (*.trap) – Locations where information about the simulation should be extracted.
  • Wave file(s) – Time varying information about the wave field.
  • Wave breaking file(s) – Time varying information about wave breaking.
  • PTM Boundary Condition file – Describes the wet/dry interface.

Output Files

The output files use the name given after the keyword :OUTPUT_PREFIX in the program control file and are appended with the following endings:

  • Mapping Output File (*_maps.h5) – Behavior of the flow and native sediments over the whole domain incremented by time.
  • Parcel Data File (*_particles.h5) – Parcel information incremented by time.
  • Echo file (*_input.out) – ASCII file echoing the input parameters of the simulation.
  • Neighbor file (*.neighbors) – Contains mesh connectivity information. Once generated, can be specified as an input file to avoid regenerating for subsequent simulations with a given mesh. If the mesh changes, the neighbor file should be regenerated.
  • Trap Count File (*_count.out) – Contains the time and ID of particles entering a trap
  • Trap Residency File (*_residency.out) – Contains the time particles enter and exit a trap and the total time spent in the trap.

Related Topics