SMS:Rainfall Values Dialog: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
[[File:RMA2 Rainfall Values.jpg|thumb|200 px|RMA2 ''Rainfall Values'' dialog]]
[[File:RMA2 Rainfall Values.jpg|thumb|200 px|RMA2 ''Rainfall Values'' dialog]]
The ''RMA2 Rainfall Values'' dialog is used to assign rainfall or evaporation across the simulation. The dialog is reached through the ''Weather'' tab of the [[SMS:RMA2_Model_Control_Dialog|''RMA2 Model Control'']] dialog.  
The ''RMA2 Rainfall Values'' dialog is used to assign rainfall or evaporation across the entire simulation. The dialog is reached through the ''Weather'' tab of the [[SMS:RMA2_Model_Control_Dialog|''RMA2 Model Control'']] dialog.  


Rainfall and evaporation can be applied to a single element, or to many elements in the network. Rainfall or evaporation is applied in inches/hour or centimeters/hour if using metric units. These values are internally converted to feet/second or meters/second depending on the designation on the SI card.  Positive values represent rainfall, while negative values represent evaporation. Rainfall and evaporation can occur at any time during the simulation.  
Rainfall and evaporation can be applied to a single element, or to many elements in the network. Rainfall or evaporation is applied in inches/hour or centimeters/hour if using metric units. These values are internally converted to feet/second or meters/second depending on the designation on the SI card.  Positive values represent rainfall, while negative values represent evaporation. Rainfall and evaporation can occur at any time during the simulation.  

Revision as of 14:55, 3 May 2017

File:RMA2 Rainfall Values.jpg
RMA2 Rainfall Values dialog

The RMA2 Rainfall Values dialog is used to assign rainfall or evaporation across the entire simulation. The dialog is reached through the Weather tab of the RMA2 Model Control dialog.

Rainfall and evaporation can be applied to a single element, or to many elements in the network. Rainfall or evaporation is applied in inches/hour or centimeters/hour if using metric units. These values are internally converted to feet/second or meters/second depending on the designation on the SI card. Positive values represent rainfall, while negative values represent evaporation. Rainfall and evaporation can occur at any time during the simulation.

Note: Rainfall or evaporation cannot be applied to junction elements or control structure elements, or elements which have a material type (IMAT) greater than 900. When globally assigning rainfall and evaporation, these elements are automatically skipped by the program.

See the "Adding Rainfall And Evaporation" section and RA Card description in the RMA2 model documentation for more information.

Related Topics