SMS:TUFLOW AD: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 23: Line 23:


==Boundary Conditions==
==Boundary Conditions==
For each boundary condition and constituent the user can provide a curve representing concentration at the boundary. This can be done by selecting the '''Advection Dispersion BC...''' button in the ''Properties'' dialog for the arc or polygon.
For each boundary condition and constituent the user can provide a curve representing concentration at the boundary. This can be done by selecting the '''Advection Dispersion BC...''' button in the ''Properties'' dialog for the arc or polygon. This brings up the ''Advection Dispersion'' dialog. In the dialog, the user can select a constituent from the list provide. The list is generated from constituents in the ''Constituents'' tab of the ''TUFLOW 2D Model Control'' dialog.
 
Clicking the curve button to the right will bring up an [[XY Editor]] dialog where the curve information can be entered.


[[File:TUFLOW AdvectionDispersion.png|thumb|none|255 px|The TUFLOW ''Advection Dispersion ''dialog.]]
[[File:TUFLOW AdvectionDispersion.png|thumb|none|255 px|The TUFLOW ''Advection Dispersion ''dialog.]]

Revision as of 16:33, 6 July 2015

File:TUFLOW AD.jpg
TUFLOW Model Control dialog showing the Constituents tab.

SMS supports the TUFLOW Advection Dispersion (AD) module. This allows users to model constituents using TUFLOW.

Creating the Constituents

The constituent data is entered in the Model Control of the TUFLOW simulation. The Constituents tab allows the user to enter in the following parameters for each constituent:

  • Name
  • Decay rate (units of day^-1)
  • Settling rate (units of m/day)
  • Initial Condition Type
  • Initial Condition – Specified Value or Polygon by Polygon value
  • Minimum Dispersion Type
  • Minimum Dispersion – Specified Value or Polygon by Polygon value
  • Dispersion Coefficient
  • Longitudinal
  • Transverse

Boundary Conditions

For each boundary condition and constituent the user can provide a curve representing concentration at the boundary. This can be done by selecting the Advection Dispersion BC... button in the Properties dialog for the arc or polygon. This brings up the Advection Dispersion dialog. In the dialog, the user can select a constituent from the list provide. The list is generated from constituents in the Constituents tab of the TUFLOW 2D Model Control dialog.

Clicking the curve button to the right will bring up an XY Editor dialog where the curve information can be entered.

The TUFLOW Advection Dispersion dialog.

External Link

Related Topics