WMS:DEM Delineation Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "To delineate a DEM in WMS, use the following steps: {{DEM Delination Workflow}} {{WMSMain}} Category:WMS Workflows Category:General Workflows Category:DEM")
 
No edit summary
Line 1: Line 1:
To delineate a DEM in WMS, use the following steps:
To delineate a DEM in WMS, use the following steps:


{{DEM Delination Workflow}}
{{DEM Delineation Workflow}}





Revision as of 15:33, 10 December 2019

To delineate a DEM in WMS, use the following steps:

1. Start the Hydrologic Modeling Wizard and setup the project.
  1. Click the Hydrologic Modeling Wizard HydrologicModelingWizardIcon.svg macro icon to start the wizard.
  2. If needed, complete the project setup by:
2. Compute flow directions and accumulations.
  1. Go to the Compute Flow Directions and Flow Accumulations step of the wizard.
  2. Select options and run TOPAZ.
3. Choose outlet location.
  1. Go to the Choose Outlet Locations tool in the wizard.
  2. Select the Create outlet point WMS CreateOutletPointTool.svg tool in the wizard and create a point the Graphics Window.
4. Delineate watershed.
  1. Go to the Delineate Watershed tool in the wizard.
  2. Set options and click the Delineate Watershed button.
5. Create sub-basins. (optional)
  1. Go to the Choose Outlet Locations tool in the wizard.
  2. Select the Create outlet point WMS CreateOutletPointTool.svg tool in the wizard and create a point the Graphics Window.
  3. Go to the Delineate Watershed tool in the wizard.
  4. Set options and click the Delineate Watershed button.