WMS:GSSHA Menu: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 11: Line 11:
==GSSHA Grid Menu==
==GSSHA Grid Menu==
This menu is active when the 2D Grid module is active.
This menu is active when the 2D Grid module is active.
; [[WMS:GSSHA#Open_Project_File|Open Project File]] :  Brings up a browser to open a GSSHA project file.
; [[WMS:GSSHA#Open_Project_File|Open Project File]] :  Brings up a browser to open a GSSHA project file. This browser will look for a GSSHA project file. A GSSHA project file begins with the first line either being GSSHAPROJECT or CASC2DPROJECT. Once a valid project file has been identified, WMS will read in all of the files needed for input to GSSHA. The channel input file is not read in but instead the channel input information is re-created from the WMS map file that stores the GSSHA coverage. GSSHA output files are not read in by the '''Open Project File''' command but instead are read by the '''Read Solution''' command.
; [[WMS:GSSHA Multiple Scenarios#GSSHA Groups|Open Group]] : Brings up a browser to open a GSSHA group file.
; [[WMS:GSSHA Multiple Scenarios#GSSHA Groups|Open Group]] : Brings up a browser to open a GSSHA group file.
; [[WMS:GSSHA#Save_Project_File|Save Project File]] : Opens the ''Save GSSHA Project File'' dialog for saving a GSSHA project file.
; [[WMS:GSSHA#Save_Project_File|Save Project File]] : Opens the ''Save GSSHA Project File'' dialog for saving a GSSHA project file.

Revision as of 15:12, 18 March 2019

The GSSHA model has two menus: one that can be accessed through the GSSHA map coverage and the other through the 2D Grid module.

GSSHA Coverage Menu

This menu is available when a GSSHA coverage is the active coverage in the Map module.

Smooth Stream/Pipe Arcs
Opens the Smooth GSSHA Streams dialog.
Read Stream Elevation
Update Lake Cells
Renumber Links
Automatically reorders and numbers links and nodes in a stream channel.
Renumber Storm Drains
Automatically reorders and numbers links and nodes in a storm drain arc.

GSSHA Grid Menu

This menu is active when the 2D Grid module is active.

Open Project File
Brings up a browser to open a GSSHA project file. This browser will look for a GSSHA project file. A GSSHA project file begins with the first line either being GSSHAPROJECT or CASC2DPROJECT. Once a valid project file has been identified, WMS will read in all of the files needed for input to GSSHA. The channel input file is not read in but instead the channel input information is re-created from the WMS map file that stores the GSSHA coverage. GSSHA output files are not read in by the Open Project File command but instead are read by the Read Solution command.
Open Group
Brings up a browser to open a GSSHA group file.
Save Project File
Opens the Save GSSHA Project File dialog for saving a GSSHA project file.
Save Group
Opens the Save GSSHA Group File dialog for saving a GSSHA group file.
Job Control
Opens the GSSHA Job Control Parameters dialog.
Clean Digital Dams
Runs the CleanDam algorithm.
Precipitation
Opens the GSSHA Precipitation dialog.
Maps
Opens the GSSHA Maps dialog.
Map Tables
Brings up the GSSHA Map Table Editor.
Renumber Links
Automatically reorders and numbers links and nodes in a stream channel.
Renumber Storm Drains
Automatically reorders and numbers links and nodes in a storm drain arc.
Model Check
Runs through the input data for a GSSHA simulation and looks for obvious inconsistencies and problems with the model.
Run GSSHA
Launches the GSSHA model run.
Run GSSHA Group
Opens the Save and Run GSSHA Group dialog to select which projects to run.
Read Calibration Output
Read Solution
Brings up a browser to open a GSSHA solution file.

Related Topics