WMS:GSSHA Model Linkage

From XMS Wiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
GSSHA Model Linkage dialog

The GSSHA Model Linkage dialog is accessible by clicking the Model Linkage... button at the bottom of the GSSHA Job Control dialog. It allows linking the current GSSHA model to other GSSHA models: a child project, a parent project, or both.

The following options are available:

  • Link to another model – Turn this on to enable linking to child and/or parent projects.
    • Model linkage section
      • Link this model to the following child project – Turn on to enable linking to a child project.
        • Open Macro.svg – Click to open an Open dialog to allow browsing to select the desired child project. The path to the selected file is displayed to the right of the button. The child project must be defined or an error will occur when trying to save the project.
        • Output computed watershed mask data from parent model – Select to output the computed watershed mask data from the parent model.
          • Read computed watershed mask data into child model – Turn on to have WMS update the child model with computed watershed mask data from the current project.
        • Output XY point-specific data from parent model – Select to output the XY point-specific data from the parent model. An error will occur when saving if there are no defined model linkage output points in the GSSHA coverage. To use this option, check the box in the Model linkage output column in the GSSHA feature nodes/points Properties dialog for each desired node/point.
          • Read XY point-specific data into child model – Turn on to have WMS update the child model with XY point-specific data from the current project.
      • Link this model to the following parent project – Turn on to enable linking to a parent project.
        • Open Macro.svg – Click to open an Open dialog to allow browsing to select the desired parent project. The path to the selected file is displayed to the right of the button. The parent project must be defined or an error will occur when trying to save the project.
        • Output computed watershed mask data from parent model – Select to output the computed watershed mask data from the parent model.
          • Read computed watershed mask data into child model – Turn on to have WMS update the child model with computed watershed mask data from the current project.
        • Output XY point-specific data from parent model – Select to output the XY point-specific data from the parent model. An error will occur when saving if there are no defined model linkage output points in the GSSHA coverage. To use this option, check the box in the Model linkage output column in the GSSHA feature nodes/points Properties dialog for each desired node/point.
          • Read XY point-specific data into child model – Turn on to have WMS update the child model with XY point-specific data from the current project.

The following buttons are found at the bottom of the dialog:

  • Help – Opens this article in a web browser.
  • OK – Saves all changes and closes the GSSHA Model Linkage dialog.
  • Cancel – Discards all changes and closes the GSSHA Model Linkage dialog.