2D Grid Files

From XMS Wiki
(Redirected from 2D Grid Files Card Types)

This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search

Two-dimensional grids are stored in 2D grid files. The grids can be either cell-centered or mesh-centered. If the grid is mesh-centered, a set of material IDs may be included in the file. The 2D grid file format is shown in Figure 1, and a sample file in Figure 2.

GRID2D /* File type */
TYPE i /* Type of grid. Mesh or Cell centered. */
IJ ±idir ±jdir /* Card for defining rows, columns. */
DIM nx ny /* # of cell boundaries in each direction. */
x1 /* X coord. of cell boundaries. */
x2
.
.
xnx
y1 /* Y coord. of cell boundaries. */
y2
.
.
yny
DELEV el /* Default elevation for grid. */

Figure 1. 2D Grid File Format.

GRID2D
ID 5758
TYPE 1
DELEV 0.000000000000000e+00
IJ -y +x
DIM 4 4
0.000000000000000e+00
3.333333333333334e+01
6.666666666666667e+01
1.000000000000000e+02
0.000000000000000e+00
3.333333333333334e+01
6.666666666666667e+01
1.000000000000000e+02

Figure 2. Sample 2D Grid File.

2D Grid Files Card Types

The card types used in the 2D grid file format are as follows:

Card Type GRID2D
Description File type identifier. Must be on first line of file. No fields.
Required YES


Card Type TYPE
Description Defines the type of grid as either cell- or mesh-centered.
Required YES
Format TYPE i
Sample TYPE 0
Field Variable Value Description
1 i 0,1 The type code:
  • i = 0 for mesh-centered
  • i = 1 for cell-centered


Card Type IJ
Description Defines the orientation of the i,j indices.
Required YES
Format IJ ±idir ±jdir
Sample IJ +x -y
Field Variable Value Description
1 ±idir ±x,±y The direction corresponding to an increasing i index.
2 ±jdir ±x,±y The direction corresponding to an increasing j index.


Card Type DIM
Description Defines the dimensions of the grid.
Required YES
Format
DIM nx ny
x1
x2
.
.
xnx
y1
y2
.
.
yny
Sample
DIM 4 6
0.0
1.0
2.0
4.0
10.0
12.0
14.0
16.0
18.0
20.0
Field Variable Value Description
1 nx + The number of cell boundaries in the x direction.
2 ny + The number of cell boundaries in the y direction.
3 to (nx+2) x1-xnx ± The coordinates of the x boundaries.
(nx+3) to (nx+ny+2) y1-yny ± The coordinates of the y boundaries.


Card Type DELEV
Description Defines a default elevation for the grid.
Required NO
Format DELEV el
Sample DELEV 100.0
Field Variable Value Description
1 el ± The default elevation.


Back to XMS