3D Interpolation Workflow

From XMS Wiki
(Redirected from 3D Geostatistics Workflow)

This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search

To interpolate to 3D grids, Ugrids, or meshes; use the following steps:

1. Import scatter point set.
  1. Use File | Open... to open files with scatter data.
    • Alternatively, drag and drop the file into the Graphics Window in GMS.
  2. Use the File Import Wizard to specify how to import the data.
2. Set interpolation options
  1. Select the Interpolation | Interpolation Options menu command.
  2. In the 3D Interpolation Options dialog select the interpolation method and options.
    3D interpolation methods include the following:
3. Interpolate scatter point set to a 3D object.
1. Interpolate to a 3D grid.
  1. Select the Interplation | Interpolate→3D Grid menu command.
  2. Set the dataset name and review interpolation options in the Interpolate→Object dialog.
2. Interpolate to a 3D UGrid.
  1. Select the target 3D UGrid in the Project Explorer to make it active.
  2. Select the Interplation | Interpolate→UGrid menu command.
  3. Set the dataset name and review interpolation options in the Interpolate→Object dialog.
3. Interpolate to a 3D mesh.
  1. Select the Interplation | Interpolate→3D Mesh menu command.
  2. Set the dataset name and review interpolation options in the Interpolate→Object dialog.
4. Interpolate to a TIN.
  1. Select the target TIN in the Project Explorer to make it active.
  2. Select the Interplation | Interpolate→Active TIN menu command.
  3. Set the dataset name and review interpolation options in the Interpolate→Object dialog.