Template:SMS Convert-Interpolate Images Workflow

From XMS Wiki
This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search
1. Convert image data.
1. Convert raster data to feature contours.
  1. Right-click on the raster image and select the Convert To | Feature Contours command to create a new map coverage with elevation contours.
2. Convert raster data to feature contours at a specified elevation.
  1. Right-click on the raster image and select the Convert To | Feature Contours at Given Elevation command.
  2. In the Create Contour Arc dialog, specify an elevation and click OK to generate a map coverage with contours created along the specified elevation.
3. Convert raster data to scatter set.
  1. Right-click on the raster image and select the Convert To | 2D Scatter command.
  2. In the Raster → Scatter dialog, give the scatter set a name and click OK to generate the scatter set.
4. Convert image data to 2D grid.
  1. Right-click on the raster image and select the Convert To | 2D Grid command.
5. Convert raster data to flood depth raster.
A water surface elevation dataset must be available in the project for this process to function.
  1. Right-click on the raster image and select the Convert To | Flood Depths command.
  2. In the Select Geometry and Dataset dialog, select the geometry containing the water surface elevation dataset and then select the water surface elevation dataset.
  3. Save the new raster with the inundated depth data.
2. Interpolate image data.
1. Interpolate raster data to active coverage.
  1. Select and make active the map coverage where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | Active Coverage command.
2. Interpolate raster data to 2D Mesh.
  1. Select and make active the mesh where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Mesh command.
3. Interpolate raster data to scatter set.
  1. Select and make active the scatter set where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Scatter command.
4. Interpolate image data to 2D grid.
  1. Select and make active the 2D grid where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate To | 2D Grid command.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:SMS_Convert-Interpolate_Images_Workflow&oldid=92473"