WMS:MWBM Locations: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
(redirect)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[Image:WMS MWBM Pumping Locations.jpg|thumb|none|left|500 px|MWBM Modeling Wizard showing the ''Pumping Locations'' step]]
#REDIRECT [[WMS:MWBM Wizard]]
 
The Pumping Locations step is used to specify the locations of pumps.
 
== Help ==
'''Add Pumping Locations''' – This button turns on the tool to create a node with a GSSHA pumping attributes.  If there is a default curve selected, the newly created pumping location will use that curve.
 
'''Delete Pumping Locations''' – This button turns on the tool to delete nodes.
 
'''Pumping Curves''' – This button launches the curve editor to add a new pumping curve to the list of curves available to select as the default curve, or to select in the spreadsheet in the shown locations.
 
'''Pumping Locations Spreadsheet''' – The spreadsheet shows existing output locations by Cell numbers and allows the user to define the pumping curve to be used at that location.
 
 
[[Image:WMS MWBM Output Locations.jpg|thumb|none|left|500 px|MWBM Modeling Wizard showing the ''Output Locations'' step]]
 
The Output Locations step is used to specify the location where GSSHA will generate a hydrograph.
 
== Help ==
'''Add Output Locations''' – This button turns on the tool to create a node with a GSSHA Hydrograph output attributes.  Note that you must click on an existing point.
 
'''Delete Output Locations''' – This button turns on the tool to delete the Hydrograph Output from a selected node.
 
'''Output Locations Spreadsheet''' – The spreadsheet shows existing output locations by Link Numbers and Node Numbers.
 
{{WMSMWBMModWizard}}
{{WMSMain}}
 
[[Category:WMS Dialogs]]

Latest revision as of 18:51, 22 March 2019

Redirect to: