User:Jcreer/TUFLOW FV Dialogs: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 22: Line 22:


===HD Parameters===
===HD Parameters===
*horizontal eddy viscosity calculation
*Horizontal eddy viscosity calculation – Options for edddy viscosity approach. Options include; None, Constant, or Smagorinsky.
*Global horizontal eddy viscosity
*Global horizontal eddy viscosity
===Advanced Parameters===
===Advanced Parameters===
*Command 1
*Command 1

Revision as of 18:17, 9 March 2016


Dialogs in TUFLOW FV have been built using the generic model interface.

TUFLOW FV Global Parameters

  • Activate parameter group

General

  • Bottom Drag Model – The default friction approach. Manning’s number will be used as the bottom drag model.
  • CFL – Default limit is 1.
  • Initial Water Level – The initial condition above the bed at the downstream end.

Time

  • Time Format – Default is set to hours.
  • Start Time – Initial time for first time step. Default is set to 0.0.
  • End Time – Time of last time step.

Output

  • Output Dir – Specify directory to create the output files.
  • SMS Dat Output – Specifies the output file as an SMS data file or as a DATV file.
  • Dat Output Types – Options are h, v, and d. Use h to output files with water level data. Use v to output velocity data. Use d to output water depth data.
  • Dat Output Interval
  • Flux Output
  • Flux Output Interval

HD Parameters

  • Horizontal eddy viscosity calculation – Options for edddy viscosity approach. Options include; None, Constant, or Smagorinsky.
  • Global horizontal eddy viscosity

Advanced Parameters

  • Command 1
  • Command 2

TUFLOW FV Material Properties

The TUFLOW FV Material Properties dialog allows setting the roughness for materials defined in the general Materials Data dialog.

TUFLOW FV Nodestring Boundary Conditions

  • Flow
  • Water Level