File:Test2.jpg: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Category:WMS Quick Tour]]
[[Category:WMS Quick Tour]]
[[Category:HEC-RAS]]
[[Category:WMS Plot]]


The 1D Hydraulic tools in WMS can be used to set up a HEC-RAS GIS Import file. Using feature arcs and polygons, users create a River schematic that consists of a river centerline, which includes data for cross-sections, river reaches, and Manning's roughness coefficients.
The 1D Hydraulic tools in WMS can be used to set up a HEC-RAS GIS Import file. Using feature arcs and polygons, users create a River schematic that consists of a river centerline, which includes data for cross-sections, river reaches, and Manning's roughness coefficients.

Latest revision as of 18:43, 22 February 2017


The 1D Hydraulic tools in WMS can be used to set up a HEC-RAS GIS Import file. Using feature arcs and polygons, users create a River schematic that consists of a river centerline, which includes data for cross-sections, river reaches, and Manning's roughness coefficients. Then, using the water surface elevations computed by HEC-RAS, WMS can delineate a floodplain based on ground elevations contained in a TIN.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current ★ Approved revision
19:25, 20 August 2007
Thumbnail for version as of 19:25, 20 August 20071,146 × 800 (111 KB)Trabadi (talk | contribs)

The following page uses this file:

Metadata