Template:Bridge Scour Properties Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 28: Line 28:
|
|
:# In the [[SMS:Bridge_Scour#Bridge_Scour_Coverage_Properties_Dialog|''Bridge Scour Coverage Properties'']] dialog, click Add Scenario [[File:Add button.png]].
:# In the [[SMS:Bridge_Scour#Bridge_Scour_Coverage_Properties_Dialog|''Bridge Scour Coverage Properties'']] dialog, click Add Scenario [[File:Add button.png]].
:# In the [[SMS:Bridge_Scour#Edit_Bridge_Scour_Scenario|''''Edit Bridge Scour Scenario'' dialog.'']] dialog, enter the scenario name and select datasets for the following:  
:# In the [[SMS:Bridge_Scour#Edit_Bridge_Scour_Scenario|''Edit Bridge Scour Scenario'' dialog.'']] dialog, enter the scenario name and select datasets for the following:  
:#* Water Surface Elevations
:#* Water Surface Elevations
:#* Water Depth
:#* Water Depth

Revision as of 21:10, 20 August 2020

1. Open the Bridge Scour Coverage Properties dialog.
  1. Right-click on the Bridge Scour coverage in the Project Explorer and select the Custom Properties command.
2. Define the gradation.
  1. In the Bridge Scour Coverage Properties dialog, select the Define Soil Gradation button.
  2. Enter gradation in the Bridge Scour Soil Gradation dialog.
3. Select the mesh.
  1. In the Bridge Scour Coverage Properties dialog, select the 2D Mesh to use which will define which datasets are available.
4. Define scenarios.
  1. In the Bridge Scour Coverage Properties dialog, click Add Scenario Add button.png.
  2. In the Edit Bridge Scour Scenario dialog. dialog, enter the scenario name and select datasets for the following:
    • Water Surface Elevations
    • Water Depth
    • Water Velocity
5. Model Specifications.
In the Bridge Scour Coverage Properties dialog:
  1. Select the Contraction Scour Variable Extraction Approach as either "Streamlines" or "Bank Width Ratios".
  2. Select the NCHRP Abutment Scour Condition as either "Type a" or "Type b".
6. Set advanced options if needed.
  1. In the Bridge Scour Coverage Properties dialog, select the Edit Advanced Options button.
  2. Define advanced options in the Bridge Scour Advanced Options dialog.