Template:Convert to Voronoi UGrid

From XMS Wiki
Revision as of 16:18, 25 October 2023 by Jcreer (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search


Convert to Voronoi UGrid

The Convert to Voronoi UGrid tool creates a Voronoi UGrid from an existing geometry (2D Mesh, Scatter Set, or UGrid). The tool uses the centroid of each triangle, element or cell of the input geometry as a node in the resulting Voronoi UGrid. The cells around the edge of the UGrid are created by adding a Voronoi node at the bisection of the boundary edge and connecting that node to the node at the triangle/element/cell centroid.

These meshes can be passed into HEC-RAS 2D for analysis.

Input parameters

  • Input grid – Select the geometry that will be converted to a Voronoi UGrid.

Output parameters

  • Output grid name – Enter the name for the new Voronoi UGrid. This will be a UGrid because scatter sets and meshes do not support polygonal cells.

Current Location in toolbox

Unstructured Grids/Convert to Voronoi UGrid