User:Jcreer/Aquaveo License Service

The Aquaveo License Service protection (ALS protection) replaces the old Sentinel and password protection (SAP protection) with a design which:

• Eliminates hardware locks and drivers.
• Allows virtual machine and servers to be used without restriction.
• Enforces the expiration date of evaluation or checked licenses.
• Detects the overuse of evaluation or checked licenses.
• Still allows customers to share a license within a user session.
• Still allows customers to move a license between computers.
• Still allows customers to share a network license.
• Still allows Aquaveo to create non-network licenses.
• Could detect the overuse of non-checked licenses or warn user when not verified. (currently disabled)

Single and Network User Configurations

The following figure displays configuration option for the Aquaveo License Service.

Aquaveo License Service Configuration Options

Example of the ALS Registration dialog

Single User

When running XMS without a network license, do the following:

1. Start XMS
2. Select Default Local address
3. Add license code
4. Close RegWiz

Network User

When ALS is set up by an adminstator, XMS automatically gets a license from default AquaLicenseDNS. Therefore, a new user only needs to do the following:

1. Install XMS
2. Run XMS

Network User Server Set Up

Do this once on the network server:

1. Install the Aquaveo License Service on a single network server.
2. Open the Aquaveo License Service folder in Windows Start menu and run XMS License Setup, i.e. RegWiz.
3. Add one or more XMS license codes to the Aquaveo License Service.
4. Point DNS name AquaLicenseDNS to the Aquaveo License Service server.
   • Optionally skip this step but then manually point each client to the Aquaveo License Service.

Evaluation User or Other Special User

Same as Single or Network User except that:

• The Aquaveo License Service must initially connect to ALManager if it is restarted (due to a reboot for instance). This requirement is enforced when the Custom1 module is disabled in the license.
  • If the ALService is unable to connect to ALManager, open RegWiz to the ALService and re-Add the license code. RegWiz will then prompt for a manual browser connection after which the newly started ALService will allow the license to be used.
  • Alternatively, allow the ALService to access the ALManager through their firewall and onto the internet.*

Moving a License

1. Reduce the number of licenses on one Aquaveo License Service.
2. Add those licenses to another Aquaveo License Service. I.e. check them back out from the ALManager after having checked them in.

Miscellaneous Features

• Each user can select the ALService and code that they want to use on each computer for each XMS product.
• An ALService can store the licenses for all XMS products.
• Each computer runs only a single instance of the ALService.
• An installed ALService automatically starts when a computer starts the Windows OS.
• RegWiz is only allowed to change licenses on a local 127.0.0.1 ALService.
• Multiple instances of XMS which are started within a user’s account on one computer can share the same XMS license.

Registration Wizard License Details

This dialog is used to troubleshoot potential registration problems. It displays the current licenses details including registered modules, models, and expiration dates.

Aquaveo Add License details dialog

Error Conditions

• XMS cannot get a license because all licenses are in use.
  • See RegWiz details of who is using the licenses.
• RegWiz cannot do add or remove for license code in use.
  • See RegWiz details of who is using the licenses.
• ALService cannot connect to the ALManager.
  • RegWiz cannot add or remove licenses. RegWiz will instruct the user to use their browser for the add or remove. Or first fix the connection and firewall to the ALManager.
  • RegWiz cannot show some license details and shows those details as a ?. Fix the firewall to allow ALService to communicate with ALManager.*
• RegWiz cannot connect to the ALService.
  • Ensure that the firewall allows the connection.
  • Or restart the ALService in Windows Services as administrator.
  • Or try an IP port different than default 56789 on both the ALService and the clients.
• XMS cannot get a license. Check license selection in RegWiz.
• XMS cannot connect to the ALService, i.e. can no longer get a license from the ALService.
  • Check the ALService address in RegWiz.
• XMS cannot use a P-code license across the network.
  • This is only allowed for an N-code license.
• XMS cannot Add all P-code licenses to an ALService.
  • Two or more licenses can only be added for an N-code license.

Related Topics

• GMS Main
• SMS Main
• WMS Main