User:Jcreer/SMS:Feature Stamping Dialogs: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 7: Line 7:
**''Use cutoff'' – On this option allows selecting which scatter set to use as a surface. Available scatter sets can be selected from the data tree once this option is enabled. The scatter set will act as a surface to determine the cut-off for the sloped banks of a stamped feature.
**''Use cutoff'' – On this option allows selecting which scatter set to use as a surface. Available scatter sets can be selected from the data tree once this option is enabled. The scatter set will act as a surface to determine the cut-off for the sloped banks of a stamped feature.
**''Bathymetry Type'' –  
**''Bathymetry Type'' –  
***"Elevation" –
***"Elevation" – The default option. Defines positive values as going up.
***"Depth" –
***"Depth" – Defines positive values as going down.


===Stamping Arc Attributes===
===Stamping Arc Attributes===

Revision as of 17:52, 2 August 2018


Stamping Coverage Attributes

The Stamping Coverage Attributes dialog will appear when creating a new stamping coverage. It can also be reached by right-clicking on the stamping coverage and selecting the Properties command.

  • Underlying Geometry – This section contains options for defining the scatter set used in the stamping process.
    • Use cutoff – On this option allows selecting which scatter set to use as a surface. Available scatter sets can be selected from the data tree once this option is enabled. The scatter set will act as a surface to determine the cut-off for the sloped banks of a stamped feature.
    • Bathymetry Type
      • "Elevation" – The default option. Defines positive values as going up.
      • "Depth" – Defines positive values as going down.

Stamping Arc Attributes

The Stamping Arc Attributes dialog is reached by double-clicking on an arc created in a stamping coverage. It can also be reached by right-clicking on the selected arc and using the Attributes command.

The following attributes can be set:

  • Feature Name – This will be used when SMS creates stamped feature coverages and scatter sets from the stamping coverage.
  • Stamping Type – Can be set to either use the channel or the embankment.
    • "Cut Feature" – Will stamp the feature using the channel.
    • "Fill Feature" – Will stamp the feature using the embankment.
  • End Cap
  • Centerline (CL) Profile
    • Constant → Elevation
    • XY Series → Elevation
    • Plot CS Profile
  • Cross Section (CS)
    • Side
    • Maximum Distance from CL
    • Specify Top Width and Single Side Slopes
    • Current CS → All CS
    • Plot Current CS

End Cap

  • Type of end cap
    • "Guidebank"
    • "Sloped Abutment"
    • "Wing Walls"
  • Angle
  • Slope
    • Distance
    • Elevation
  • Maximum Distance from CS
  • Plot Shape