WMS:Dekalb Rational Hydrograph: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
The Dekalb Rational Hydrograph was developed by Dekalb County Georgia, and like the Universal Rational Hydrograph, ordinates are computed by scaling the peak discharge by an appropriate value. The time to peak occurs at <math>5 * t_c</math>, while the time base is ''10 * t<sub>c</sub>''. All coefficients occur at increments of ''t<sub>c</sub>'', and are different depending on whether ''t<sub>c</sub>'' is less than 20 minutes or not. The following table lists the coefficients and a typical hydrograph is shown below.
#redirect [[WMS:Rational_Method_Computing_Hydrographs#Dekalb_Rational_Hydrograph]]
 
{| Border=1 CellSpacing=0 CellPadding=2
|-
| ColSpan=3 |
{| Border=1 CellSpacing=0 CellPadding=2 style="background:#aaccff;"
|-
!Dimensionless Time and Hydrograph Ordinates
|}
|- style="background:#dfdfdf;"
!<math>t</math>/<math>t_c</math> !!<math>Q</math>/<math>Q_p</math>  for <math>t_c</math> < 20 min !!<math>Q</math>/<math>Q_p</math> for <math>t_c</math> >= 20 min
|- Align=Center
|0 ||0.00 ||0.00
|- Align=Center
|1 ||0.16 ||0.04
|- Align=Center
|2 ||0.19 ||0.08
|- Align=Center
|3 ||0.27 ||0.16
|- Align=Center
|4 ||0.34 ||0.32
|- Align=Center
|5 ||1.00 ||1.00
|- Align=Center
|6 ||0.45 ||0.30
|- Align=Center
|7 ||0.27 ||0.11
|- Align=Center
|8 ||0.19 ||0.05
|- Align=Center
|9 ||0.12 ||0.03
|- Align=Center
|10 ||0.00 ||0.00
|}
 
where:
 
* <math>t_c</math> = Time of concentration.
* <math>Q</math> = Flow at time <math>t</math>, in cfs.
* <math>Q_p</math> = Peak flow.
 
[[Image:DekalbRationalHydrograph.gif]]
 
 
==Related Topics==
* [[WMS:Rational Method Computing Hydrographs|Computing Hydrographs with Rational Method]]
* [[WMS:Rational Method Equation|Rational Method Equation]]
 
 
{{WMSMain}}
[[Category:Rational Method|D]]
[[Category:Equations]]

Latest revision as of 15:40, 11 December 2017