WMS:GSSHA Multiple Simulations: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
Line 7: Line 7:




'''Job Control''' - The job control for the active GSSHA model can be accessed from the GSSHA menu item.  The job control can also be opened by right-clicking on the job control icon that corresponds with the desired GSSHA model and selecting "Edit".
'''Job Control''' – The job control for the active GSSHA model can be accessed from the GSSHA menu item.  The job control can also be opened by right-clicking on the '''job control icon''' that corresponds with the desired GSSHA model and selecting ''Edit''.


'''Precipitation''' - The precipitation for the active GSSHA model can be accessed from the GSSHA menu item.  The precipitation can also be opened by right-clicking on the precipitation icon that corresponds with the desired GSSHA model and selecting "Edit".
'''Precipitation''' – The precipitation for the active GSSHA model can be accessed from the GSSHA menu item.  The precipitation can also be opened by right-clicking on the '''precipitation icon''' that corresponds with the desired GSSHA model and selecting ''Edit''.


'''GSSHA Coverage''' - When a GSSHA model is created, it is a assigned a GSSHA coverage (if a GSSHA coverage does not already exist, WMS creates one).  To change the assigned GSSHA coverage, right-click on the coverage icon that corresponds with the desired GSSHA model and select the GSSHA coverage that you want to assign.
'''GSSHA Coverage''' – When a GSSHA model is created, it is a assigned a GSSHA coverage (if a GSSHA coverage does not already exist, WMS creates one).  To change the assigned GSSHA coverage, right-click on the coverage icon that corresponds with the desired GSSHA model and select the GSSHA coverage that you want to assign.


'''Index Maps''' - All index maps for all GSSHA models are shown in the data tree under the grid. To assign a map to a specific GSSHA model, right-click on the Index Maps folder under the desired GSSHA model, select "Assign", and then select the index map that you want to assign.  To unassign an index map, right-click on the map and select "Remove".
'''Index Maps''' – All index maps for all GSSHA models are shown in the data tree under the grid. To assign a map to a specific GSSHA model, right-click on the ''Index Maps'' folder under the desired GSSHA model, select ''Assign'', and then select the index map that you want to assign.  To unassign an index map, right-click on the map and select ''Remove''.


'''Continuous Maps''' - All continuous maps for all GSSHA models are shown in the data tree under the grid.  To assign the maps to a specific GSSHA model, right-click on the Continuous Maps folder under the desired GSSHA model, select "Assign", and then select the index map that you want to assign.  To unassign a continuous map, right-click on the map and select "Remove".  
'''Continuous Maps''' – All continuous maps for all GSSHA models are shown in the data tree under the grid.  To assign the maps to a specific GSSHA model, right-click on the Continuous Maps folder under the desired GSSHA model, select ''Assign'', and then select the index map that you want to assign.  To unassign a continuous map, right-click on the map and select ''Remove''.  


'''Solution''' - Once a GSSHA model has successfully run, the solution is shown underneath the model in the data tree.  If the solution already exists, it can be read in by right-clicking on the model's project name and selecting "Read Solution".
'''Solution''' – Once a GSSHA model has successfully run, the solution is shown underneath the model in the data tree.  If the solution already exists, it can be read in by right-clicking on the model's project name and selecting ''Read Solution''.




Line 24: Line 24:


=== GSSHA Groups ===
=== GSSHA Groups ===
'''Saving GSSHA Groups''' - Multiple GSSHA scenarios can be saved together as a group.  To do this, right-click on the 2D Grid Folder and select "Save GSSHA Group." A dialog will appear to prompt you to select which scenarios you want to save.  You will also need to pick a location for WMS to save the scenarios and the GSSHA Group File (*.ggp).
'''Saving GSSHA Groups''' – Multiple GSSHA scenarios can be saved together as a group.  To do this, right-click on the 2D Grid Folder and select ''Save GSSHA Group.'' A dialog will appear to prompt you to select which scenarios you want to save.  You will also need to pick a location for WMS to save the scenarios and the GSSHA Group File (*.ggp).


'''Opening a GSSHA Group''' - To open a group of GSSHA scenarios, right-click on the 2D Grid Folder and select "Open GSSHA Group" and select the GSSHA Group File (*.ggp) that you wish to open.  This will open each project that corresponds with this group.  You also have the option to open the solutions, if they exist.
'''Opening a GSSHA Group''' – To open a group of GSSHA scenarios, right-click on the 2D Grid Folder and select ''Open GSSHA Group'' and select the GSSHA Group File (*.ggp) that you wish to open.  This will open each project that corresponds with this group.  You also have the option to open the solutions, if they exist.


'''Running a GSSHA Group''' - To run multiple GSSHA scenarios, right-click on the 2D Grid Folder and select "Run GSSHA Group." A dialog will appear in which you can select which projects you want to run.  These projects will be saved as a group and then WMS will run each GSSHA scenario in the group.
'''Running a GSSHA Group''' – To run multiple GSSHA scenarios, right-click on the 2D Grid Folder and select ''Run GSSHA Group.'' A dialog will appear in which you can select which projects you want to run.  These projects will be saved as a group and then WMS will run each GSSHA scenario in the group.


==Related Topics==
==Related Topics==
* [[WMS:GSSHA|GSSHA Overview]]
* [[WMS:GSSHA|GSSHA Overview]]

Revision as of 19:34, 4 February 2013

Overview

Multiple GSSHA models using the same 2D grid can be managed within a single instance of WMS. The models are displayed in the data tree, where the user can edit the job control, precipitation, GSSHA coverage, index maps, and continuous maps.


File:GSSHAMultipleModels.png


Job Control – The job control for the active GSSHA model can be accessed from the GSSHA menu item. The job control can also be opened by right-clicking on the job control icon that corresponds with the desired GSSHA model and selecting Edit.

Precipitation – The precipitation for the active GSSHA model can be accessed from the GSSHA menu item. The precipitation can also be opened by right-clicking on the precipitation icon that corresponds with the desired GSSHA model and selecting Edit.

GSSHA Coverage – When a GSSHA model is created, it is a assigned a GSSHA coverage (if a GSSHA coverage does not already exist, WMS creates one). To change the assigned GSSHA coverage, right-click on the coverage icon that corresponds with the desired GSSHA model and select the GSSHA coverage that you want to assign.

Index Maps – All index maps for all GSSHA models are shown in the data tree under the grid. To assign a map to a specific GSSHA model, right-click on the Index Maps folder under the desired GSSHA model, select Assign, and then select the index map that you want to assign. To unassign an index map, right-click on the map and select Remove.

Continuous Maps – All continuous maps for all GSSHA models are shown in the data tree under the grid. To assign the maps to a specific GSSHA model, right-click on the Continuous Maps folder under the desired GSSHA model, select Assign, and then select the index map that you want to assign. To unassign a continuous map, right-click on the map and select Remove.

Solution – Once a GSSHA model has successfully run, the solution is shown underneath the model in the data tree. If the solution already exists, it can be read in by right-clicking on the model's project name and selecting Read Solution.


Most of the options available under the GSSHA menu are also found in the right-click menu of the GSSHA project in the data tree. When selected from the GSSHA menu, they are performed on the active model. When selected from the right-click menu, they are performed on the corresponding model.


GSSHA Groups

Saving GSSHA Groups – Multiple GSSHA scenarios can be saved together as a group. To do this, right-click on the 2D Grid Folder and select Save GSSHA Group. A dialog will appear to prompt you to select which scenarios you want to save. You will also need to pick a location for WMS to save the scenarios and the GSSHA Group File (*.ggp).

Opening a GSSHA Group – To open a group of GSSHA scenarios, right-click on the 2D Grid Folder and select Open GSSHA Group and select the GSSHA Group File (*.ggp) that you wish to open. This will open each project that corresponds with this group. You also have the option to open the solutions, if they exist.

Running a GSSHA Group – To run multiple GSSHA scenarios, right-click on the 2D Grid Folder and select Run GSSHA Group. A dialog will appear in which you can select which projects you want to run. These projects will be saved as a group and then WMS will run each GSSHA scenario in the group.

Related Topics