|
|
| (8 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| The '''Recompute All Stations''' command updates river station information for the 1D hydraulic centerline and the 1D hydraulic cross section coverages. If you have made ''any'' changes to centerline arcs in the 1D hydraulic centerline coverage that changes the cross section stations in the 1D hydraulic cross section coverage, you should use this command. For example, if you have some cross sections with negative station values, using this command should fix the cross section stations. To update the cross section stations, first use this command in the 1D hydraulic centerline coverage and then use this command in the 1D hydraulic cross section coverage. This will insure your cross section stations are set to the correct values. This command does the following in the 1D hydraulic centerline and 1D hydraulic cross section coverages:
| | #redirect [[WMS:River_Tools#River_Tools_Menu]] |
| | |
| ===1D Hydraulic Centerline Coverage===
| |
| | |
| This command recomputes the length and stationing along any centerline arcs in a 1D hydraulic centerline coverage.
| |
| | |
| ===1D Hydraulic Cross Section Coverage===
| |
| | |
| This command recomputes the cross section stations for a 1D hydraulic cross section coverage.
| |
| | |
| | |
| ==Related Topics==
| |
| * [[WMS:Hydraulic Modeling Introduction|1D Hydraulic Modeling]]
| |
| * [[WMS:Export GIS File|Export GIS File]]
| |
| * [[WMS:Import GIS File|Import GIS File]]
| |
| * [[WMS:Managing Cross Sections|Managing Cross Sections]]
| |
| * [[WMS:Area Property Coverage|Area Property Coverage]]
| |
| * [[WMS:Extract Cross Sections|Extracting Cross Sections]]
| |
| * [[WMS:Material Properties|Material Properties]]
| |
| | |
| | |
| {{WMSMain}}
| |
| | |
| | |
| [[Category:HEC-RAS|HEC-RAS]]
| |
| [[Category:WMS 1D River|HEC-RAS]]
| |
