Template:GMS Interpolate Raster Workflow

From XMS Wiki
Revision as of 20:50, 15 February 2017 by Jcreer (talk | contribs)

Jump to navigationJump to search
1. Interpolate raster data to active coverage.
  1. Select and make active the map coverage where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | Active Coverage command.
2. Interpolate raster data to 2D Mesh.
  1. Select and make active the mesh where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Mesh command.
3. Interpolate raster data to a 2D scatter set.
  1. Select and make active the 2D scatter set where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Scatter command.
4. Interpolate raster data to 2D grid.
  1. Select and make active the 2D grid where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate To | 2D Grid command.