Template:SMS Interpolate Images Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 13: Line 13:
|-
|-
|
|
:# Select and make active the mesh where the raster data is to be interpolated.
:# Select and make active the [[SMS:Mesh Module|mesh]] where the raster data is to be interpolated.
:# Right-click on the raster image and select the [[SMS:GIS_Module_Menus#GIS_Module_Right-Click_Commands|''Interpolate'' | '''2D Mesh''']] command.
:# Right-click on the raster image and select the [[SMS:GIS_Module_Menus#GIS_Module_Right-Click_Commands|''Interpolate'' | '''2D Mesh''']] command.
|}
|}

Revision as of 15:26, 23 September 2015

1. Interpolate raster data to active coverage.
  1. Select and make active the map coverage where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | Active Coverage command.
2. Interpolate raster data to 2D Mesh.
  1. Select and make active the mesh where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Mesh command.
3. Interpolate raster data to scatter set.
  1. Select and make active the scatter set where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate | 2D Scatter command.
4. Interpolate image data to 2D grid.
  1. Select and make active the 2D grid where the raster data is to be interpolated.
  2. Right-click on the raster image and select the Interpolate To | 2D Grid command.