User:Jcreer/SMS:SRH-2D Solution Data

From XMS Wiki
< User:JcreerThis is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search

Solution Variables

There are several variables that can be generated in the SRH-2D Model run. Some of these include:

  • Bed shear stress (B_Stress)
  • Bed elevation (Bed_Elev))
  • Concentration (CONC_T)
  • Critical sediment diameter (D*)
  • Froude number (Froude)
  • Erosion depth (ERO_DEP)
  • Velocity Magnitude (Vel_Mag)
  • Velocity (Velocity)
  • Water depth (Water_Depth)
  • Water elevation (Water_Elev)

Notes

  • For the volume under ERO_DEP_ft; the numbers are an area calculation for each selected element, derived from the linear depth (or solid) volume at each node of the element. If it is negative, it measures the depth of material that has been deposited for the selected element. If it is a positive number, it measures the depth that has been eroded.