SMS:ARR Mesh Quality Assessment Plot: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 48: Line 48:


{{Template:Navbox SMS}}
{{Template:Navbox SMS}}
[[Category:SMS Plots|A]]

Revision as of 17:35, 28 January 2014

The Angle Representation Region (ARR) plot is used to assess the overall quality of a triangular mesh such as those used by ADH, ADCIRC and other numerical engines. When the plot wizard is selected, this option appears if the mesh module is enabled. Clicking finish in the plot wizard results in an ARR plot for the current unstructured mesh, loaded in SMS.

The plot includes the ARR region (defined below), a point for each element in the mesh, and three contour lines (0.3 in red, 0.45 in yellow and 0.6 in green) of the currently selected element quality measure (also defined below). As a general rule, elements with quality lower than 0.3 should be reviewed and improved (mesh editing) if possible.

The user can click on any point in the plot to see the element ID associated with that point and the six quality measure values for that element.

Once the mesh is edited in any way, the user can update the ARR plot by right-clicking in the plot and selecting Refresh. Until this is done, the plot will continue to reflect the mesh that existed when it was generated (or most recently refreshed).

This plot is based on a the publication in Communications in Numerical Methods in Engineerings, Volume 19 (2003) pp 551-561 by J. Sarrate, et. al. entitled "Numerical representation of the quality measures of triangles and triangular meshes". Several of the figures below are derived from this paper.

To assess the quality of a triangular mesh, such as those used by ADH or ADCIRC, the quality of each element is represented as a point, based on the interior angles of that element. These interior angles are labeled α, β, and γ as shown:

Elem angles.png

We can plot these three angles into an equilateral triangle

BaryDomain.png

If we order the three angles so that α > β > γ as shown:

Elem angles ordered.png

All of the points, will fall into the shaded portion of the equilateral triangle. This is referred to as the ARR region.

ARRdomain.png

The quality of the elements is further assessed by computing a quality measure from attributes of the triangle. These attributes include:

  • The minimum interior angle αmin(γ from previous figure).
  • The lengths of edges.
  • The triangle area.
  • The inner and outer radius.
  • The minimum distance through the triangle (hmin).

These measures vary from 0.0 at the edges of the equilateral triangle to 1.0 at the center. The measures supported by SMS include:



The following figures show how each of these quality measures cover the ARR

Contours.png

Related Topics