SMS:BOUSS Runup / Overtopping Viewing Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Transect Profile==
==Transect Profile==
By using the plot wizard or by right-clicking on the simulation icon in the project explorer, there is the option to view the profile of an individual transect. Each arc in the simulation can be viewed by selecting the desired arc in the Transect arc list on the bottom left portion of the dialog. The bathymetry is displayed with the locations of probes and wavemakers. On a separate plot, the damping, roughness, and porosity can be viewed. This plot is for viewing purposes only.
By using the plot wizard or by right-clicking on the simulation icon in the project explorer, there is the option to view the profile of an individual transect. Each arc in the simulation can be viewed by selecting the desired arc in the Transect arc list on the bottom left portion of the dialog. The bathymetry is displayed with the locations of probes and wavemakers. On a separate plot, the damping, roughness, and porosity can be viewed. This plot is for viewing purposes only.
[[File:TransectProfile.jpg|thumb|none|left|550 px|BOUSS-2D Runip/Overtopping ''Transect'' profile.]]
[[File:TransectProfile.png|thumb|none|left|550 px|BOUSS-2D Runip/Overtopping ''Transect'' profile.]]


==Solution View==
==Solution View==
Line 7: Line 7:


===Profile===
===Profile===
This view is used to display the bathymetry with the following datasets if they were turned on in the model control: WSE, velocity magnitude, mean water level, significant wave height, mean velocity, and maximum runup height. A user can view the data for multiple wave sets for a single transect at the same time. Once the desired data is selected, clicking the '''Update''' button will refresh the plot window to show the selected data.
This view is used to display the bathymetry with the following datasets if they were turned on in the model control: WSE, velocity magnitude, mean water level, significant wave height, mean velocity, and maximum runup height. This allows viewing the data for multiple wave sets for a single transect at the same time. Once the desired data is selected, clicking the '''Update''' button will refresh the plot window to show the selected data.
[[File:SolutionProfile.jpg|thumb|none|500 px|left|''BOUSS-2D Runup/Overtopping Solution View'' profile.]]
[[File:SolutionProfile.jpg|thumb|none|500 px|left|''BOUSS-2D Runup/Overtopping Solution View'' profile.]]


===Time Series===
===Time Series===
The time series view displays the probe data from the simulation. In this view, the user can display the data for any combination of transects, wave cases, and probes.
The time series view displays the probe data from the simulation. This view can display the data for any combination of transects, wave cases, and probes.
[[File:SolutionTimeSeries.jpg|thumb|none|left|500 px|BOUSS-2D Runup/Overtopping Time Series profile.]]
[[File:SolutionTimeSeries.jpg|thumb|none|left|600 px|BOUSS-2D Runup/Overtopping Time Series profile.]]


==Statistics==
==Statistics==
[[File:RunupStatistics.png|thumb|600 px|BOUSS-2D Runup/Overtopping ''Statistics'' dialog.]]
If a simulation has been run, the '''Statistics''' option will be available in the right-click menu for the simulation. This ''Statistics'' dialog will display various statistics for velocity, pressure, force, and water surface elevation probes on each transect.  
If a simulation has been run, the '''Statistics''' option will be available in the right-click menu for the simulation. This ''Statistics'' dialog will display various statistics for velocity, pressure, force, and water surface elevation probes on each transect.  


The ''Time Series'' statistics display the following:
The "Time Series" statistics display the following:
* Minimum – the minimum value in the time series
* ''Minimum'' – The minimum value in the time series
* Maximum – the maximum value in the time series
* ''Maximum'' – The maximum value in the time series
* Mean – the mean value for the time series
* ''Mean'' – The mean value for the time series
* Standard Deviation – the standard deviation for the time series
* ''Standard Deviation'' – The standard deviation for the time series
The ''Eta Zero-Crossing'' option displays:
The "Eta Zero-Crossing" option displays:
* HAV – Average value of all peaks.
* ''Hav'' – Average value of all peaks.
* H13 – Value exceeded by 1/3 of the peaks.
* ''H1/3'' – Value exceeded by 1/3 of the peaks.
* H110 – Value exceeded by 1/10 of the peaks.
* ''H1/10'' – Value exceeded by 1/10 of the peaks.
* HMAX – Maximum value of all peaks.
* ''Hmax'' – Maximum value of all peaks.
* TAV – Average period.
* ''Tav'' – Average period.
* T13 – Period exceeded by 1/3 of the peaks.
* ''T1/3'' – Period exceeded by 1/3 of the peaks.
* T110 – Period exceeded by 1/10 of the peaks.
* ''T1/10'' – Period exceeded by 1/10 of the peaks.
The ''Runup Statistics'' option displays:
The "Runup Statistics" option displays:
* RMAX – Maximum value of all peaks.
* ''Rmax'' – Maximum value of all peaks.
* R2 – Value exceeded by 2% of peaks.
* ''R2%'' – Value exceeded by 2% of peaks.
* R10 – Value exceeded by 10% of peaks.
* ''R10%'' – Value exceeded by 10% of peaks.
* R33 – Value exceeded by 1/3 of peaks.
* ''R33%'' – Value exceeded by 1/3 of peaks.
* RMEAN – Average of all peaks.
* ''Rmean'' – Average of all peaks.


==Related Topics==
==Related Topics==
* [[SMS:BOUSS2D Runup / Overtopping|BOUSS2D Runup / Overtopping]]
* [[SMS:BOUSS Runup / Overtopping|BOUSS Runup / Overtopping]]




{{Template:Navbox SMS}}
{{Template:Navbox SMS}}
[[Category:BOUSS-2D|R]]
[[Category:Runup/Overtopping|View]]
[[Category:SMS Dialogs|B]]
[[Category:Runup/Overtopping Dialogs|View]]
[[Category:Needs Update]] <!--include picture for statistics-->
[[Category:SMS Plots]]
[[Category:SMS Plot Dialogs]]

Latest revision as of 15:24, 22 July 2019

Transect Profile

By using the plot wizard or by right-clicking on the simulation icon in the project explorer, there is the option to view the profile of an individual transect. Each arc in the simulation can be viewed by selecting the desired arc in the Transect arc list on the bottom left portion of the dialog. The bathymetry is displayed with the locations of probes and wavemakers. On a separate plot, the damping, roughness, and porosity can be viewed. This plot is for viewing purposes only.

BOUSS-2D Runip/Overtopping Transect profile.

Solution View

After running a simulation, the data can be viewed in the Solution dialog. This dialog can be accessed through the Plot Wizard. There are two different views in this dialog: Profile and Time Series.

Profile

This view is used to display the bathymetry with the following datasets if they were turned on in the model control: WSE, velocity magnitude, mean water level, significant wave height, mean velocity, and maximum runup height. This allows viewing the data for multiple wave sets for a single transect at the same time. Once the desired data is selected, clicking the Update button will refresh the plot window to show the selected data.

BOUSS-2D Runup/Overtopping Solution View profile.

Time Series

The time series view displays the probe data from the simulation. This view can display the data for any combination of transects, wave cases, and probes.

BOUSS-2D Runup/Overtopping Time Series profile.

Statistics

BOUSS-2D Runup/Overtopping Statistics dialog.

If a simulation has been run, the Statistics option will be available in the right-click menu for the simulation. This Statistics dialog will display various statistics for velocity, pressure, force, and water surface elevation probes on each transect.

The "Time Series" statistics display the following:

  • Minimum – The minimum value in the time series
  • Maximum – The maximum value in the time series
  • Mean – The mean value for the time series
  • Standard Deviation – The standard deviation for the time series

The "Eta Zero-Crossing" option displays:

  • Hav – Average value of all peaks.
  • H1/3 – Value exceeded by 1/3 of the peaks.
  • H1/10 – Value exceeded by 1/10 of the peaks.
  • Hmax – Maximum value of all peaks.
  • Tav – Average period.
  • T1/3 – Period exceeded by 1/3 of the peaks.
  • T1/10 – Period exceeded by 1/10 of the peaks.

The "Runup Statistics" option displays:

  • Rmax – Maximum value of all peaks.
  • R2% – Value exceeded by 2% of peaks.
  • R10% – Value exceeded by 10% of peaks.
  • R33% – Value exceeded by 1/3 of peaks.
  • Rmean – Average of all peaks.

Related Topics