SMS:PTM Files: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
 
(19 intermediate revisions by 2 users not shown)
Line 2: Line 2:


== Input Files ==
== Input Files ==
* Required files
===Required files===
** [[SMS:PTM Program Control File|Program Control File]] (.pcf) - run time instruction for the model.
** Mesh file - bathymetry and boundary information for the model.
*** PTM Version 1.0 supports [[SMS:ADCIRC|ADCIRC]] compatible three-noded triangular finite element mesh files ([[SMS:ADCIRC_Mesh|fort.14 or .grd]]).  SMS contains tools to convert mesh files to this format.
** Hydrodynamic input file - time varying water surface elevation and depth-averaged velocities.
*** The SMS 9.2 interface to PTM Version 1.0 supports XMDF (.h5) format hydrodynamic files.  SMS contains tools to convert mesh output files to this format.
** [[SMS:PTM Sediment File|Native sediment file]] - native sediments over the domain defined by the mesh file.


* Optional files
* '''[[SMS:PTM Control File|Program Control File]]''' (*.pcf) – Run time instruction for the model.
** [[SMS:PTM Source File|Sediment source file]] - the sediment sources in the simulation.
* '''Mesh file''' – Bathymetry and boundary information for the model.
** [[SMS:PTM Trap File|Trap file]] - locations where information about the simulation should be extracted.
*:PTM Version 1.0 supports [[SMS:ADCIRC|ADCIRC]] compatible three-noded triangular finite element mesh files ([[SMS:ADCIRC Mesh|fort.14 or .grd]]). SMS contains tools to convert mesh files to this format.
** [[SMS:PTM Wave File|Wave file(s)]] - time varying information about the wave field
* '''Hydrodynamic input file''' – Time varying water surface elevation and depth-averaged velocities.
** [[SMS:PTM Wave Breaking File|Wave breaking file(s)]] - time varying information about wave breaking
*:Versions of SMS including 9.2 and later supports XMDF (*.h5) format hydrodynamic files. SMS contains tools to convert mesh output files to this format.
* '''[[SMS:PTM Sediment File|Native sediment file]]''' – Native sediments over the domain defined by the mesh file.
 
===Optional files===
 
* '''[[SMS:PTM Source File|Sediment source file]]''' – The sediment sources in the simulation.
* '''[[SMS:PTM Trap File|Trap file]]''' (*.trap) – Locations where information about the simulation should be extracted.
* '''[[SMS:PTM Wave File|Wave file(s)]]''' – Time varying information about the wave field.
* '''Wave breaking file(s)''' – Time varying information about wave breaking.
* '''[[SMS:PTM Boundary Condition File|PTM Boundary Condition file]]''' – Describes the wet/dry interface.


== Output Files ==
== Output Files ==
The output files use the name given after the keyword :OUTPUT_PREFIX in the [[SMS:PTM_Program_Control_File|program control file]] and are appended with the following endings:
The output files use the name given after the keyword :OUTPUT_PREFIX in the [[SMS:PTM Control File|program control file]] and are appended with the following endings:
* '''Mapping Output File''' (*_maps.h5) - behavior of the flow and native sediments over the whole domain incremented by time.
* '''Mapping Output File''' (*_maps.h5) – Behavior of the flow and native sediments over the whole domain incremented by time.
* '''Parcel Data File''' (*_particles.h5)- parcel information incremented by time.
* '''Parcel Data File''' (*_particles.h5) – Parcel information incremented by time.
* '''Echo file''' (*_input.out) - ASCII file echoing the input parameters of the simulation.
* '''Echo file''' (*_input.out) – ASCII file echoing the input parameters of the simulation.
* '''Neighbor file''' (*.neighbors) - contains mesh connectivity information. Once generated, can be specified as an input file to avoid regenerating for subsequent simulations with a given mesh. If the mesh changes, the neighbor file should be regenerated.
* '''Neighbor file''' (*.neighbors) – Contains mesh connectivity information. Once generated, can be specified as an input file to avoid regenerating for subsequent simulations with a given mesh. If the mesh changes, the neighbor file should be regenerated.
* '''Trap Count File''' (*_count.out) - contains the time and ID of particles entering a trap
* '''Trap Count File''' (*_count.out) – Contains the time and ID of particles entering a trap
* '''Trap Residency File''' (*_residency.out) - contains the time particles enter and exit a trap and the total time spent in the trap.
* '''Trap Residency File''' (*_residency.out) – Contains the time particles enter and exit a trap and the total time spent in the trap.


==Related Topics==
* [[SMS:PTM|PTM]]


{{Template:PTM}}


{{Template:SMSMain}}
{{Template:Navbox SMS}}


[[Category:PTM|F]]
[[Category:PTM|F]]
[[Category:SMS File Formats|P]]

Latest revision as of 14:14, 30 March 2017

Input and Output files for PTM.

Input Files

Required files

  • Program Control File (*.pcf) – Run time instruction for the model.
  • Mesh file – Bathymetry and boundary information for the model.
    PTM Version 1.0 supports ADCIRC compatible three-noded triangular finite element mesh files (fort.14 or .grd). SMS contains tools to convert mesh files to this format.
  • Hydrodynamic input file – Time varying water surface elevation and depth-averaged velocities.
    Versions of SMS including 9.2 and later supports XMDF (*.h5) format hydrodynamic files. SMS contains tools to convert mesh output files to this format.
  • Native sediment file – Native sediments over the domain defined by the mesh file.

Optional files

  • Sediment source file – The sediment sources in the simulation.
  • Trap file (*.trap) – Locations where information about the simulation should be extracted.
  • Wave file(s) – Time varying information about the wave field.
  • Wave breaking file(s) – Time varying information about wave breaking.
  • PTM Boundary Condition file – Describes the wet/dry interface.

Output Files

The output files use the name given after the keyword :OUTPUT_PREFIX in the program control file and are appended with the following endings:

  • Mapping Output File (*_maps.h5) – Behavior of the flow and native sediments over the whole domain incremented by time.
  • Parcel Data File (*_particles.h5) – Parcel information incremented by time.
  • Echo file (*_input.out) – ASCII file echoing the input parameters of the simulation.
  • Neighbor file (*.neighbors) – Contains mesh connectivity information. Once generated, can be specified as an input file to avoid regenerating for subsequent simulations with a given mesh. If the mesh changes, the neighbor file should be regenerated.
  • Trap Count File (*_count.out) – Contains the time and ID of particles entering a trap
  • Trap Residency File (*_residency.out) – Contains the time particles enter and exit a trap and the total time spent in the trap.

Related Topics