SMS:RMA2 Boundary Conditions

Assigning Boundary Conditions

Boundary conditions are generally defined on nodestrings but may also be defined on nodes. The default boundary condition is a closed boundary (no flow).

Deleting Boundary Conditions

Boundary conditions are removed using the menu command RMA2 | Delete BC.

Nodal Boundary Conditions

File:RMA2 Nodal BC.jpg

RMA2 Nodal Boundary Conditions dialog

Boundary Condition Type

• None
  • Water Surface Elevation

A water surface elevation boundary condition is assigned to the selected nodestring. This boundary condition is normally located at the tailwater location. However. RMA2 does sometime edit the water depth at the exit boundary to satisfy the finite element equations.

• Velocity Components
• Unit Flowrate
• No Slip Condition

Boundary Angle

• Specify Flow Direction
  • Perpendicular into Boundary
  • Perpendicular out of Boundary
  • Specified angle

Optional Parameters

• Water Density
• Include in node summary file

Boundary Condition Value

• Constant
• Transient

Nodestring Boundary Conditions

File:RMA2 Assign BC.jpg

RMA2 Nodestring Boundary Conditions dialog

Boundary Condition Type

• None

No Boundary Condition is assigned to this nodestring.

• Specified Flow Rate

A flow rate BC is assigned to this nodestring. It is the most popular way to provide a total flow across a particular continuity line. The total flow (cubic units per second), flow angle (degrees from positive x-axis) and distribution factor can be specified.

Lateral distribution of nodal velocities

• Water Surface Elevation

A water surface elevation BC is assigned to this nodestring. This boundary condition is normally located at the tailwater location. (However RMA2 does sometime edit the water depth at the exit boundary to satisfy the finite element equations.)

• Reflecting Boundary

Considered an advanced feature – for more information see the "Boundary Permeability (Reflection/Absorption)" section on page 99 of the Users Guide to RMA2 version 4.5.

• Rating Curve

A rating curve can also be defined by selecting the Options... button.

Flow Rate

• Constant
• Transient

Boundary Reflection

• Steady state water surface
• Tidal storage surface area

Flow Direction

• Degree CCW from positive X axis
• Perpendicular to boundary

Advanced Options

• Make this nodestring the "Total Flow" nodestring
• Specify vorticity

Flow Distribution

A real number between 0.0 and 1.0, that is used to weight the nodal x and y velocity components according to the nodal depths and friction across the continuity line.

Extract Nodal Boundary Conditions

File:RMA2extractBC.jpg

Example of the Extract Nodal Boundary Condition dialog.

This dialog is reached through the RMA2 | Extract Nodal BC command. It is only available with dynamic simulations—defined in the RMA2 Model Control dialog.

• Boundary Condition Type
  • "None"
  • "Water surface elevation"
  • "Velocity"
  • "Unit-Flow"
• Specify Flow Direction
  • Perpendicular info boundary
  • Perpendicular out of boundary
  • Specified Angle
• Extract

Example of the Extract Boundary Conditions dialog.

• View Extracted

Related Topics

RMA2